LED Flush Mount Ceiling Light Fixture, 5000K Daylight White, 12inch 24W, 3200LM, Slim Flat Panel Lighting Fixture, Square Modern Ceiling Lamp for Bedroom, Kitchen, Living Room, Closet, Stairwell

Replacing a kitchen fan and light with this small light. I was going for the cheap route and I’m glad I did. I was pretty nervous that this small cheap light wouldn’t provide me with enough light in my kitchen. It’s surprisingly nice and bright. 3x brighter than the garbage I had before. Soo happy I’m buying two more for my stairwells

Addendum to first review....This is so great that we now have the bigger one for our kitchen and another one for our hall. The lights are fantastic. They are very bright and beautiful. You will love them. Recommended highly!!!!

This is easy to install. Works as designed.

This was replacing a previous unit. There was an 11x11 hole that the previous unit snapped into nicely. Since this unit is intended for surface mounting, I had to get a hanger to bridge two studs and an electrical box to place on the hanger. The boxes intended for ceiling fixtures have screws at a 45 degree angle. The mounting plate for this fixture has slots at 0 and 90 degrees. Fortunately, I was able to mount the box on the hanger at a 45 degree angle, but if I had been working with an existing ceiling box, it would have been a problem.My second problem was that the mounting plate assumes it will be surface mounted, but given that there was already a hole almost as big as the fixture, I had to mount it on the box. That mean't it was probably 1/16th of an inch inside the sheetrock. That made for a tight fit, which I wanted, but it would not mate with the light fixture. I had to put a steel bar behind each side of it to pry them out. Once mated, I removed the bars and everything was fine.The third issue is the worst. The product came with a three wire pressure splice. It is a clever idea. You press down on a lever, insert the wire and release the lever. BUT . . . it was poorly made and didn't hold the wires tightly enough. After three or four failed attempts, I threw it out and replaced it with a couple of Wago splices that use a similar concept, except with a stronger spring and a lever arm to lower it. They work very well and are highly recommended for situations like this where the two wires are of different thickness, and particularly when one is stranded, and the other is solid. Conventional wirenuts don't always hold both wires well in such situations.

These fixture are very bright. I am very happy with them. I've installed 5 of these in my home so far and I ordered three more. To make your install easier, I suggest a few things. 1) Connect two pieces of stranded 14 gauge wire about 8 inches long to the solid wires in your junction box - this will make your install a lot easier having flexible wires. 2) The fixture comes with European colored wires (blue/brown), stripped to expose about 1/4 inch of wire. Strip an additional 1/4 inch of the wire so you have about 1/2 inch of stripped wire - this will make it a lot easier to wire nut the wires together. 3) Install the plastic support ring to the junction box. 4) connect the flexible wires you installed to the fixture's wires. Blue connects to White. Brown connects to Black. You can suspend the fixture by its wires if you are gentle. 5) Put the fixture on the support ring and turn 1/4 turn (counter-clockwise) (left), until it stops. Make sure you know which way to turn ahead of time.The ceiling fan above my desk needed more light...so I decided to install one of these fixtures. It can be done, but it is an advanced project. I removed the four A-15 sockets. I drilled a 1/8 hole directly in the center of the 12" fixture, I was able to avoid any electronics and fed the pull chain thru the hole. I started with a 1/16" drill bit and increased in size to a 1/8" drill bit. Be careful, the drill can melt the plastic. Obviously drilling holes thru the fixture will void your warranty.I bought these fixtures from two different sellers for both the manufacturer is LedLightsWorld.com (on the box). If the specs are the same 24W, 3200 lumen, 5000K with different sellers on Amazon, it is the same product and go with the cheaper price. At present it is $24.88 per fixture.

I bought this to replace an old light in my guest room closet. It was easy to install and works great. Would definitely reconvene! Good quality and price.

We bought this to replace an old flouresence light for my daughter. At first we were not sure if it will work well there. But, when installed, she was so happy as it is much better looking and bright. A great product comes in with good price.

We really struggled putting this up with the square mounting bracket and the anchors and screws fitting. The light does not sit flush when put up but does work.