Aluminum Alloy Hood Latches Catch Kit - Locks for Jeep Wrangler JK/JKU, JL/JLU & Gladiator JT - Black

Love this product. Not to difficult to install but amazing results over standard latches. Looks awesome!

The latches are made of a quality aluminum alloy. Installation is easy and they are worth the money.

Great quality and looks outstanding!

The media could not be loaded. I picked up these FlyOX latches to replace my factory latches for the same reasons as most people. I originally bought a set of locking latches from another seller and immediately returned them when I saw the size. These are twice the size and much beefier and solid. There weren’t any instructions, however, it’s straight forward. I did have to be a bit creative with the lower rubber seals as the hole was a bit off, but I used a paper punch to remedy that. Speaking of the lower rubber seals, there are two sets, one labeled JK and the other JL. Neither lined up on my 2015 JK Rubi. I also opted to use the factory nuts for two reasons. One, they have a washer built in and two, they are very magnetic which helped a lot when installing the lower latches.To remove and install the lower latches, I lowered my front grill, which is easy to do and saves a lot of trouble getting at the nut with a box end wrench, especially when removing the old ones. Then, installation was a little tricky to get the nut aligned if you don’t have small hands, however, I used a mechanics telescopic magnet to get the nut started (something I couldn’t do with the nuts that came with the kit). Once I got it started, I slipped my wrench on it and tightened it up, making sure the seal and latch were properly aligned. The final step was reattaching the rest of the lower latch. Next, the upper latch was easy peasy. I propped the hood up just enough to get at the backside nuts on and tightened them just enough so I could easily adjust them for alignment and a snug fit. Oh, don’t forget to slip the little rubber bit behind the upper latch before tightening everything up. Once I got everything aligned, I tightened everything up and checked the fit. Perfect! And, they look Marvelous! I hope this review and accompanying video helps.

These latches look great and prevent hood flutter... it says easy install, but be aware that you have to take the front grill off and headlights out to get to the bolts. Not that difficult, but in my opinion not as easy as they say. Very well worth the work, in my opinion!

Very easy to install and adjust. Aluminum material as promised. Thank you

Bought this set off latches along with 2 other brands. I hand seen reviews of some that were thin metal and just plain cheap. I set all three side by side. These were hands down the thickest and beefiest latches. It was a no brainer. I sent the others back. Confirmed everything was stainless with a magnet. I did use the OEM nuts since they had the flared washer nut.. you’ll need to pull the rubber hood spacer off the top of the bottom portion of your OEM latches carefully. I ripped one of mine. These fit perfectly on these new ones (if you don’t rip them like I did. Super happy with this buy and will be looking for other stuff this company sells.

Pretty easy to install with basic hand tools. To make it easier remove grill on your jeep which is makes it a ton easier. Product seems well made at a great price point. Installed on 2013 jeep jku.

Looks great

Passt gut, eine Anleitung wäre hilfreich gewesen. Mir persönlich schließt es etwas zu straff. Sieht aber gut aus!

Facile et belle modification pas cher qui terni pas

Great look and fit

Easy to install. Great addition to my jeep