معلومات عنا
دعم العملاء
احصل على التطبيق
قم بتوجيه الكاميرا لتنزيل التطبيق
حقوق الطبع والنشر © 2024 Desertcart Holdings Limited
🔋 Power Up Your Game with Confidence!
The HXJNLDC 3.7V 803040 1100mAh Battery Replacement is designed for Turtle Beach Elite 800 and Stealth 700 Gen 2 headsets, providing a reliable power source with advanced safety features. This rechargeable lithium polymer battery ensures optimal performance and compatibility with various electronic devices, making it a must-have for gamers and tech enthusiasts alike.
| Item Dimensions | 1.57 x 1.18 x 0.31 inches |
| Battery Weight | 21 Grams |
| Unit Count | 1.0 Count |
| Battery Cell Type | Lithium Polymer |
| Recommended Uses For Product | Indoor/Outdoor |
| Reusability | Rechargeable |
| Battery Capacity | 1100 Milliamp Hours |
| Amperage | 1 Amps |
| Voltage | 3.7 Volts (DC) |
B**Y
Great battery life. Got 23 hours play time on the first cycle.
Working great so far! The existing battery on my headphones was barely lasting an hour between charges; so I started researching how to replace the internal battery. I couldn't find any battery listed specifically for my Turtle Beach XP400 headphones. This battery matched the voltage and the dimensions, so I gave it a try. The XP400 doesn't use the connector that came on the battery; so I had to cut that off and solder the battery leads directly to the circuit board. After fully charging; I timed the usage before the "please charge" beeping started happening; and I got 23 hours on the first cycle! So far, so good. Thanks!
N**E
Works great! Fits Turtle Beach Tango with some soldering.
I was worried when my Earforce Tango's started to only hold a charge for few hours. I'm not sure how old they are, but I love that headset. This battery pack fit the previous battery location without any modification to the headset. The battery is located in the charging side of the headset and there's a total of 6 torx screws to access the battery. There is not a 3 pin connector on the old school Turtle Beach headsets. The wires are directly soldered to the board, so plan on soldering directly to the board or cutting the old wires and soldering those to the new wires. The old battery had Black-Yellow-Red wires and the new battery is Black-White-Red. Simply substitute the white wire for yellow. I used a plastic pry tool to gently pry the old battery out, which was held in place with double sided tape. Hope this helps someone out, it's definitely worth doing.
V**Z
It works.
Was able to remove and install the new battery. New battery last way longer now, just like new.
M**C
Was not compatible
Item description said it was compatible with my Turtle Beach 700 Gen 2 headsets, however it wasn’t. Overall size was smaller and connector wasn’t even close. Please update your product description.
O**B
Perfect
Worked seamlessly with my Elite 800 Turtle Beach headphones. Cord was perfect link and no modification were needed to plug into motherboard. I now have a battery that can be fully charged!
J**S
Perfect replacement
Fit perfectly and lasts like it did when I first bought the headset
J**C
Perfect fit for Turtle Beach 800
My headset would die after 2 hours and bow it last 10+ hours. Works vetter than the original battery and is a direct fit.
B**T
Actually works, actually fits!
It was a gamble that paid off. I bought the battery pack as a replacement for my Turtle Beach XP 800 pro headphones. It fit perfectly, but make sure you have a little piece of double sided tape handy. The connector was even the right one. No need to solder the old one on. Couldn’t be happier.
G**9
Turtle beach 800x
Plug and play pour les écouteurs Turtle beach 800x
荒**泰
ポータブルナビの劣化したリポバッテリー交換用に購入
商品ページに寸法が出ていたので助かりました。３線仕様だったので選択肢が少なかったですがばっちり交換できました。交換後は1時間近く駆動できるようになり、交換した甲斐が有りました。交換前は3分と持ちませんでした。
T**K
1年持たない
2023.7.30に購入しました。デジタルインナーミラーの内部バッテリーを交換しました。2014.1.18電源を切って1時間経つとリセットされてします。
ترست بايلوت
منذ يوم واحد
منذ 3 أسابيع