Kaisiking Double Sided Adhesive Tape Kaisiking 5mm / 10mm x 25M Heat Resistant High Adhesion Transparent Acrylic Tape, LCD Screen Repair Sticker for Cell Phone Touch Screen Repair

Not heat resistant

I was looking for some super sticky double sided tape. I found this tape and it appears to be commecial quality. Adheres very well and seems thicker than other tape I have tried.

A quality product that does exactly what it supposed to do, would buy it again

Packaged well and separated with thin plastic so the rolls didn't stick together. I used this when I replaced the screen on my tablet. It wasn't overly sticky in a way that would make the job impossible. I was able to cut it and not have it be hopelessly stuck to the scissors. Getting the red backing off was also not that difficult. With some effort (and a hair dryer) I was even able to remove and reset the screen digitizer a few minutes after placing it, when I realized my ribbon connector wasn't lining up properly. I would purchase this again and recommend it to anyone who needs adhesive in their electronic repair.

For starters, this stuff is basically crystal clear. Secondly - its incredibly thin. Third - its amazingly strong. I would consider this almost industrial grade. I actually have this mounting an LED strobe light bar on the top inside windshield of a Freightliner utility vehicle. Its about 3.5 feet long, and about a 1/2” tall, maybe an inch deep. It has some weight to it. I ran this the full length of the strobe light on the plastic lens and stuck it to the inside of the windshield. It is NOT coming off…. My first attempt was just using 3, 3-4 inch strips, and after a few days the strobe light bar fell off in the heat (90+ degree summer days). Then i covered the whole length of the lens. Its literally invisible looking at it through the windshield from the outside, and thats no exaggeration. It does not distort the light, shape, or color of the LED lights in any way, shape, or form. Its been about 2 months, and the thing hasn’t moved. I’d actually be a little nervous trying to remove it from the windshield at this point. I can literally grab the strobe light bar, (its flexible to meet the contour of the glass) and pull on it with two hands using moderate force and the thing honestly does not move. I would have to very carefully try to “peel” the light off, and would probably use a heat gun if the day ever comes that it needs to be removed.If you are looking for something really strong, thin, and clear for a semi permanent install - I’m telling ya - this is it….

I used this product with a 5 pin, 10mm RGBWW LED strip. The strip lighting was inexpensive, but most every type of LED strip I've used over the years suffers from poor tape adhesive. It just doesn't stick or stay put.I used this on a computer mod, the LED strip was not staying in place. This solved my problem, and it appears I have several years worth of adhesive tape now, the two spools are about 4mm and 8mm in width respectively, but many feet in length, which means I have plenty for all sorts of applications. The best part is, the tape is very thin and not noticeable after being applied.The only downside is that the spools are kinda big and unwieldy. The tape can curl up while being applied, so I cut short strips of about 3 or 4 inches at a time. But I was aware there was no dispenser when I purchased it, so I knew what I was getting into. The tape backing is plastic and will static cling to your fingers. Just so you know. Slightly cumbersome.I highly recommend this product.