guykerGuitar Tune-O-Matic Bridge and Stop Bar Tailpiece Combo with Anchors and Studs Replacement Compatible with LP SG EPI 6 String Electric Guitar(Rainbow Chameleon)

The color is great. I got gold. The bushings fit single in the guitar and the bridge came properly intonated, it may need minor tweaks but comes very close, you should always expect to reset intonation if swapping the bridge. The gold paint/coating looks very good and was free of defects. The threads between the bushings and hd down bolts(or whatever the screws that hold the tailpiece and bridge down) are a bit gritty and not super smooth, which doesn't feel great when setting the action and tailpiece/bridge string angle. The intonation adjustment screws are smooth though.I don't know if this is necessary, but I did abrade the paint/coating on the bushing with the ground wire to ensure a good ground, that's what the final picture shows. Ground wire shows 0 resistance between tailpiece and back of pot, like it should.Note the tailpiece and bridge do have set screws, those will need to be unscrewed to slide them on and off their mounting bolts. The Allen wrench sent was the wrong size for some reason(too small), so I used a torx bit to.loosen the set screws(and honestly didn't even retighten them)

Well made and the color is stunning. Carefully packaged. Really great product at great value.

Great quality, and was the perfect finishing touch to a blacked out Les Paul Jr. project guitar for my son. Made tuning and intonation a breeze.

I got this for my Epiphone Les Paul Classic Worn purple burst. The studs screw right into the factory bushings and everything fits with no modifications. The tailpiece is solid and locks into place with set screws as does the bridge. The bridge doesn’t fit as tightly on the studs as the factory bridge but because of the set screws is secure. As far as functionality it is definitely an upgrade to the Epiphone lock tail and bridge. Much more stable and I like that the saddle screws are solidly mounted instead of held in with a retaining spring. The saddles on the factory bridge are split with three facing one way and three facing the opposite way. (High and low strings). This has all the saddles facing so that the angled sides are towards the tailpiece. I haven’t fine tuned the intonation yet but it is very close from just eyeing it compared to the old bridge. I don’t think it will have any issues. I really think that it feels more stable and I don’t have any rattling issues like I had with the factory bridge. The good is excellent. The bad is that I really think that it is too aged looking for my taste. I got the bridge and tailpiece set and a set of aged keystone tuners and they just look too weathered to me. I also got a Q-Parts pick guard bracket that I think looks better. I think that rather than coating them with nickel and then aging it they coat them with something that is supposed to look aged. I just wanted the old nickel look that is dull in places but not completely flat. I may switch to something different later on but I am definitely going to get a locking tailpiece and a bridge that doesn’t use a retaining spring. If you like the look of one of Guyker’s finishes I would say definitely go ahead and get it. As far as functionality you won’t be disappointed.

Bridge came almost ready to just slap in and play. Locks in place like a tone pro's but costs a fraction of that. No issues with build quality or rattling. Good stuff.

I love the sound and design

These parts arrived quickly and well packaged in a soft plastic case in a pre-formed rubber like foam insert. They fit perfectly on an Epiphone Les Paul II I purchased as kid in the 90's. It had all blavk hardware but I decided to update my guitar and change the hardware as well. I am currently waitin on my pickups so I can finish it up and will see how well the intonation is with the new bridge. Take note, the bridge and tail piece studs are 12mm and fit well in the existing wholes. It is hard to find some that fit but these did. I will post pictures and an update when my upgrades are complete.

I used multiple Guyker parts on my newest build and I am *very* happy. Time will how the durability holds up, but for now this tailpiece set looks, feels, and plays great.

Good solid nice piece of kit. Fit straight on the existing posts on my les Paul. Good and solid and easy set up.

Bestellt am 22. Oktober 2023 für €118,29.Das Set ist schon irgendwie ein Unikat. Das gibt es nicht allzu häufig.Gut, Optik ist Geschmackssache. Ich finde die Klasse. Verbaut wird der Satz in eine DIY LP mit Spaltahorn-Decke. Das Bild zeigt den Rohling noch unbehandelt.Im Einzelnen:- Mechanik: Geht smothy und gleichmäßig und sind mit Locking Mechanismus ausgestattet.- Bridge & Tailpiece: Nix Besonderes bis auf Anmerkung (1) unten- Pickups: Die kommen mir verdächtig nach Artec Humbuckern vor. Typischer PAF Sound. Mit ein wenig mehr Power. Die Pickups sind splitbar.Meine Änderungen an dem Set-Up(1): Die Bridge werde ich gegen eine mit Rollen wechseln. Auch von Guyker: B0B14L17DM.(2): Die Rahmen der Pickups werde ich - aber das ist reine Geschmackssache - gegen Elfenbeinfarben austauschen.(3) Poti-Knöpfe: Habe zusätzlich welche in gleicher Optik und auch von Guyker (B08B4FWM62) bestellt. Blöderweise hat so ein Set 3 Knöpfe, weshalb ich für 4 Poties 2 bestellen musste. Hab jetzt halt 2 zuviel.Insgesamt bin ich dann bei einem Komplettset nach Wunsch für ~175.-€ gelandet. Da kann man nun wirklich nicht mökern.Ich würde das Set auf jeden Fall wieder kaufen!

Los tornillos no entran y las partes donde van los tornillos son más anchas, tienes que hacer más ancho con taladro, si no quieres meter broca en tu les paul gibson no los compres

Looks good and does a great job on my home build guitar, came well packaged and arrived on time.

The media could not be loaded.  Really nice bridge and tailpiece set. Not lightweight, so not really suitable of your going for a traditional 59 Les Paul type thing. But for a drop in upgrade for any tune o matic bridge, quality seems better than tone pros which is basically what this is copying with the grub screws to lock in place. No rattles, no issues. Intonated easily - especially if you fit it with the screws facing the pickup for easy access.Nice packaging too.