Bulbeats 1000 Lumens 2pcs 78-BX Chipsets 3056 3156 3057 3157 4157 LED Bulbs with Projector LED Bulbs,Back Up Reverse Lights,Brake Lights,Tail Lights Xenon White 6000K 12-24V

One of the tail light bulbs on my F150 blew out – rather than shelling out ~$6 for a pair of new incandescent bulbs, I decided to go LED.After researching the multitude (thousands?) of bulbs out there an Ebay and Amazon, I arrived at these for their balance of cost and lumens. I bought 4, 2 for my combo brake/turn signals and 2 for the backup lights, thinking the brighter bulb would boost my visibility when parking and trailering.Here’s my observations –Pros:-They’re and exact fit, easy installation (duh)-They’re very bright, brighter than the OEM bulbs- Obviously they run cooler and pull less current-The backup lights are now MUCH brighter.-The hot color temp – below – is actually a boon when backing up at night; My backup camera actually “sees” better with them.-Long life - It’s likely I’ll never unscrew the turn signal bezel ever again.Cons:-Color temp is very white – 6000k. Normally I prefer warmer but behind the red bezel it’s hardly noticeable.-They are polarized – so you have to guess when inserting them in the socket. I guessed wrong 50% of the time – just re-insert them 180 degrees. Not a big deal.-It is true that, at least on my F150, the stock signal relay will flash very fast due to the very low current draw.-They are more expensive than incandescent, but these seem to be the cheapest in their LED class.Comments:-Some choose to parallel a load resistor to alleviate the fast relay flashing. Rather than going thru what for me would be the hassle of buying and adding the resistors, I bought an electronic LED flasher relay. (This is one I bought  iJDMTOY (1) 5-Pin EP27 FL27 Electronic LED Flasher Relay Fix For LED Turn Signal Bulbs Hyper Flash Fix ) It was about the same price as the resistors, pretty easy to swap out with the OEM relay and it works with any type of bulb.Bottom line:Given the price and the functionality of these bulbs, they turned out to be an excellent and better replacement for my OEM bulbs any aftermarket incandescent. I would buy again and I recommend them.

They're brighter than the OEM bulbs, you don't want to look right into them and it's a nice white light. They plug right in but they're a bit tight so you just have to work them in a bit. When you install these have your ignition on and your transmission in reverse because they are polarity sensitive which gives you a 50/50 chance of getting it right the first time. Once you work it into the socket if it doesn't light up pull it out, turn it around and try again, this will save you putting them all back together just to find you have to take it apart again. As far as visibility goes they're not a whole lot better then the OEM bulbs because they do seem to disperse a lot. They're okay I guess, look kind of nice for whatever that's worth - we all know how important it is to have nice looking back up lights.

Ordered these bulbs to replace a set of Pilot led bulbs I picked up from the local parts store. The bulbs are for my 11 GMC Acadia's DTR lights. The old set started flashing and failing about a week after I installed them. So far these bulbs are FAR superior. 10x's brighter and they have a nice projection/throw.The bulbs are very well constructed and seem like they will last. I have only had them in for a week but they are going strong and no flashing. I have not found any DTR lamps that cast light the way these do. They light up the garage as if you had some headlights on.The light is bright and white! They match the HID lamps from the factory.The photos attached have no color correction and no adjustments in color.I would recommend these to anyone! Just ordered a set for my back up lights!!

perfecto

I wanted to switch out all the bulbs on my 1998 Jeep Cherokee SE to LED based. In order to make this work properly, I used the following parts together:Novita EP27 flasher relay, LUYED 50W 6ohm 3157 Led Load Resistors,Bulbeats 1000 Lumens 78-BX Chipsets 3157 LED Bulbs.Replaced all the 3157 bulbs with the Bulbeats 78-BX LED bulbs. Added one LUYED resistor to a bulb on each front running/turn signal light and then replaced the turn signal relay with the Novita EP27.My turn signals and hazards blink perfectly and they are super bright!! This is the perfect combo to give this old Jeep a fresh modern look. Also replaced headlights with the Apollointech TRX 8900 5" x 7". No flickers. Can see at night!

These are good bulbs but I received red ones, doesn't shine to brightly when you have a red lens, wished I looked back on the description of my order so I could've exchanged them for the xenon whites

Fits my 2001 Silverado 2500HD daytime running lights. They burn out fairly often. These have worked good to replace them. It’s been almost 6 months and no issues. They are brighter than stock and look more white/blue. Cheaper than my local parts stores and work the same. Make sure you put them in right. If they don’t light up flip them.

Awesome little bulbs, realized after getting them and verifying they work perfect I needed more so I ordered 10 more and now they're all relaxed with these. Swapped all the interior lights I could with these and the other bulb it requires on a 2013 Charger and it turned out way good. Shipped quick and absolutely no complaints about this brand.