ENERLITES Electrical Replacement Plug & Connector Set, Extension Cord Ends Male and Female, 15 Amp 125 Volt, Straight Blade Plug Grounding Type, NEMA 5-15P & 5-15R, UL Listed, 66202-Y, Yellow

I am pleasantly surprised by the convenience and reliability of the ENERLITES Electrical Replacement Plug & Connector Set. Recently, I accidentally ran over the connection on my extension cord, and replacing it with this set was remarkably straightforward.The set includes both male and female ends, which allowed me to quickly replace the damaged connector without needing to purchase separate components. The installation process was intuitive, thanks to clear instructions provided by ENERLITES. Within minutes, I had the new connector securely in place, restoring functionality to my extension cord.What impressed me most was the durability and quality of the replacement plugs and connectors. Despite the mishap, these components proved resilient and sturdy. The materials used feel robust, ensuring a secure fit and reliable electrical connection once installed.Additionally, the design of the connectors facilitated a hassle-free installation. The prongs aligned easily and inserted smoothly into the socket, eliminating the need for excessive force or adjustments. This user-friendly experience speaks to the thoughtful engineering of the ENERLITES set.Overall, I am highly satisfied with the ENERLITES Electrical Replacement Plug & Connector Set. It exceeded my expectations by providing a quick and effective solution to my damaged extension cord connection. If you're looking for reliable replacement plugs that are easy to install and built to last, I would definitely recommend considering ENERLITES. Five stars!

Easy to figure out and it's an excellent product. Thank you.

These are quite nice, easy to use and look clean. They are however a little bit cheaply made. But overall they work well, and fixed my extension cords which had failing connections. So I am happy with them. Would buy again.

Saved me a lot of money. Easy to install

If you know AC wiring, you don't need any instructions. If this is your 1st. time all you need to learn is which wire goes where. the white wire goes to the silver screw, the black wire (hot) goes to the gold screw, and the green is the ground going to the last screw for the prong. It's that simple!. If you puncture your palm using the screwdriver, you shouldn't be doing this, if you don't know which wires go where and don't educate yourself before doing this, and wire it incorrectly, you shouldn't be doing this, you will get shocked like reviewer jeff. The instructions that come with are of no help at all. but above here in the description, it shows you all you need to know. or you can google it and see

These worked well to replace the plugs on an expensive extension rod that one of my pups chewed up. Thank Goodness it wasn’t plugged in. They were easy to install.

I almost liked the price, but still seemed over priced. The Male Plug works pretty good! The Female Socket assembly has a molding error such that the two pieces do not line up correctly when reassembling. This can be corrected using a sharp tool to remove the offending blibbit. It is not a piece of flash left from molding. It's simply a mistake which should have been corrected long long ago. I tried ordering similar products from other brands, but they all have the exact same error and probably are all made by the same oriental plastic molding company. Other purchasers have indicated that wiring can be difficult and if you're old school and want to wrap the stripped conductor around the screw, they're right! The thickness of the copper conductor uses up the whole screw length with nary a thread left to engage plus its located in a tight area. Inserting the copper conductor along one side of the screw causes the U conductor clamp to tilt badly and seems to result in poor mechanical strength. Also, getting all the fine wire strands of the conductor to stay under the clamp while tightening is another tedious hurdle. My personal solution to control stray wire strands is wire tinning; ie twist the strands, add some flux and tin the wire with 60 / 40 solder to convert the stranded conductor to a solid conductor (which is what most electrical fixtures are designed to accommodate). To eliminate the clamp from tilting, in this particular case, I split the stranded conductor into two halves before tinning so it looked like a two prong fork. Finally, insert the tinned fork under the wire clamp with the screw in the middle and half the wire on each side. Now the clamp will screw down without tilting. If you want to get fancy, bend the tips of the fork 90 degrees like the way a wire crimp terminal is made to add mechanical pull strength.For this price, the job should have been easier, like you stick the stripped end of the wire into a hole and tighten a screw that's at a 90 degree angle to the wire and you're done! Maybe next year!

Easy to install on my extension cord that the plug broke off. No complaints at all