Yes it will damage the evacuator reservoir and turn the fittings gummy over time. We had two separate evacuators at my shop- one for oil and the old one my boss destroyed was only to be used for gas. It basically collapsed the tank. It didn’t leak, but looked horrible and it still worked fine. Also, I did not get blown up. Any mechanic will tell you, a customers fuel pump never goes out with a 1/4 tank of gas in the car. Usually, its full or 3/4 of the way full. 20-30 gallons in the tank makes removing the tank a little difficult without sucking some gas out first. Advice: buy two, or immediately transfer gas to a proper storage container and clean out the evacuator and fittings.

Mityvac Mv7300 PnEUmatic Air Operated Fluid Evacuator With Accessories For Draining Engine Oil Or Transmission Fluid Directly Through The Dipstick Tubes

Mityvac Mv7300 PnEUmatic Air Operated Fluid Evacuator With Accessories For Draining Engine Oil Or Transmission Fluid Directly Through The Dipstick Tubes

Q: Has anyone used it to do a complete transmission flush,and if so how?

The idea of using Mityvac is to avoid mess. Yes I used it for complete flush, replaced 3.8 qt of fluid four times within 100 miles, fluid is bright pink even after 800 miles and not a single drop on the floor. Have patience, this thing will do the trick. Alternatively you can disconnect fluid outgoing line to trans, start the car wait for 1/4 of your tranny fluid to be collected, stop the car, replace the fluid with new, repeat 4 times and you are done, but there may be spills and you don't require a MityVac, it just does your job easy and clean. Pick your choice.

Q: Can this be used for brake fluid?

If ypu want to use for brake fluid and coolant buy 7075x01 gasket or buy a send extractor CTA 7073, that pump comes with the anti corrosive seals on them and is only like $3 more then the pumps with oil seals on them. You can do brake fluid with this but you'd need to wash it out within 10 mins of have brake fluid inside, eventually the gasket will let air into pump and you'll get the drips when extracting fluids. I'd just use this to do it and buy the 7075x01 seals to change them to when this starts dripping eventually. You'll need to change them out eventually anyway, even if you only do oil extraction.

Q: what all you guys use to clean the inside of the tank so will not contaminate the clean fluid for dispensing

I've used mine to pump out hydraulic /transmission oil. I clean the tank by running a pint or so of gasoline through it prior to putting the clean oil in it. This has worked fine.

4.6/5

معرّف المنتج: 293090482

معاملة آمنة

🧪Chemical-resistant

⚙️Pneumatic pump

🛠️2.3-gallon capacity

يُشترى معًا بشكل متكرر

Mityvac MV7300 Pneumatic 2.3 Gallon Venturi Vacuum Pump Fluid Evacuator, Uses Compressed Air, Chemical-Resistant Polyethylene, Air Shut-Off Valve, Overflow Prevention, Quick-Drain Spout, Large Base

Mityvac MVA6852 1.5 Liter Fluid Evacuator Extractor and Dispensing Syringe, Twist-Valve, Dual-Seal Piston, MVA7218 Rubber ATF Adapter, for Master Cylinders, Transaxles, Power Steering and Coolant

Mityvac 7201 2.3 Gallon Fluid Evacuator Extractor and Dispensing Pump, Push Button, Manual Operation, Chemical-Resistant Polyethylene, Automatic Overflow Prevention, Quick-Drain Spout, Large Base

الوصف

🚀 Extract Like a Pro with Mityvac!

SAFETY FIRST - Includes air shut-off valve and overflow prevention for spill protection.
DURABLE DESIGN - Constructed from chemical-resistant polyethylene for long-lasting use.
STABLE PORTABLE - Large base ensures stability, perfect for garages and mobile services.
VERSATILE APPLICATIONS - Extracts oil, brake fluid, transmission fluid, and more with ease.
EFFORTLESS FLUID EXTRACTION - Utilizes a pneumatic Venturi vacuum pump for rapid fluid removal.

The Mityvac MV7300 Pneumatic Air Operated Fluid Evacuator is a high-performance tool designed for efficient fluid extraction in automotive, marine, and industrial settings. With a 2.3-gallon capacity and chemical-resistant construction, it ensures durability and versatility for both DIY enthusiasts and professional technicians. Safety features like an air shut-off valve and overflow prevention make it a reliable choice for any workspace.

المواصفات

Manufacturer	Lincoln
Brand	Mityvac
Model	MV7300
Product Dimensions	32.77 x 24.13 x 65.53 cm; 1.86 kg
Item model number	7300
Manufacturer Part Number	MV7300
Item Weight	1.86 Kilograms

لديك سؤال؟ انظر ماذا طلب الآخرون

Has anyone used it to do a complete transmission flush,and if so how?

Can this be used for brake fluid?

what all you guys use to clean the inside of the tank so will not contaminate the clean fluid for dispensing

Will gas hurt this

الأسئلة الشائعة

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

فيكرام د.

جراب MOLLE ذو جودة استثنائية. سعيد جدًا بشرائي.

منذ أسبوعين

عبد الله ب.

سعر رائع لمنتج أصلي. شحن دولي سريع أيضًا!

منذ 3 أسابيع

عرض جميع مراجعات ترست بايلوت

تسوّق عالميًا، ووفّر مع Desertcart

قيمة مقابل المال

أسعار تنافسية على مجموعة واسعة من المنتجات.

تسوّق عالميًا

نخدم أكثر من 300 مليون متسوق في أكثر من 200 دولة.

حماية معززة

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

ضمان العملاء

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

تطبيق Desertcart

تسوّق أثناء التنقل، في أي وقت وأي مكان.

₪1889

الرسوم والضرائب مشمولة

Israelمتجر

إرجاع مجاني

30 يومًالمستخدمي عضوية PRO

15 يومًابدون عضوية