LinksysWiFi Extender, WiFi 5 Range Booster, Dual-Band Booster, 2,500 Sq. ft Coverage, Speeds up to (AC1900) 1.9Gbps - RE7000

I used this as a Wireless Access Point to give better coverage on the other side of the house, connected via ethernet it seems to work pretty good. Only complaint is the initial setup is annoying and doesn't work very well, when you follow the initial setup instructions use a laptop to configure it rather than a phone. Once setup and configured as a wireless access point it performed well, I used the same network settings and devices were able to connect to it with ease and the speed performance was good, I was able to get the rated speeds. Since this is in the bedroom and I hate lights at night there was a nice handy feature of disabling the network port lights. For the price it was good value for the money.

I’ve been using this extender for about two weeks, and so far I am very happy with it. I’m getting 4-5x faster speeds in my office than with a router, alone. It’s important that you make sure you have a compatible router, but if this extender is able to take advantage of seamless roaming technology, this is the way to go!My wife and I have a one story, 2000 square foot home, and our wireless router is in the front room. Wi-Fi speed in the front room and surrounding bedrooms is anywhere from 50-100mbps, depending on the time of day, but our home office, which is in the far corner of the house usually can’t exceed 10mbps, and generally averages even lower. The speed was fine for most day to day use, but we would have to move our laptops to another room for acceptable download speeds.I bought an extender from another company, thinking that the different SSID wouldn’t be an issue, but having to choose different networks depending on where you are in the house is not ideal, especially with phones and tablets.The coolest feature of this extender is the seamless roaming capability. This has been around for businesses for many years, but I’m happy to see the technology coming to households. Seamless roaming allows your router to switch Wi-Fi devices between the access point with the strongest signal. This is a useful feature if you end up moving around the house a lot, because you don’t have to worry about which Wi-Fi network you are connected to. The negative aspect of most range extenders is they force you to specifically connect to the extender’s SSID when you need a signal boost.I was on the verge of buying a mesh network system (google Wi-Fi, Linksys velop, etc), but seeing as we have just bought a high end router earlier in the year, it felt like a waste.I was skeptical of how well this extender would work, but not only can I move from room to room with my tablet and laptop, but my speeds are also better than i had anticipated. I can access a full strength signal on both 2.4GHz and 5GHz.If i was buying a new Wi-Fi solution today, it would be tough to overlook the benefits of a mesh network solution, but if you already have a good router and only need to get a stronger signal to a problem area, and you can take advantage of the seamless roaming this extender offers, this is the way to go!

Conflict of interest statement: Lynksys asked me to review this product. They paid for the product; I paid the WA tax. So we both have an interest in the review but I am not a salesman. I am reviewing how to get the product working.The front of the box says "Works with ALL Wi-Fi routers", and the side panel says, in smaller type, "Push-button Connet: One-Touch connection to your router". Sounds wonderful. But not so fast. You first have to decide if you are going to set this up as a "wireless range extender" or as a wired range extender (access point). My guess, which is the same as Linksys', it that you saw Wi-Fi Range Extender in the name of the product and locked onto the Wireless image. So we will deal with that first.Now, the first question is there a WPS button on your router? If no, you are in for a world of hurt, because for you there is no Push-button connect, no One-Touch connection to your router. If yes, you are directed to plug the extender device into an electrical outlet near the router. Here the bubble bursts. In my case, my computer system is in the third bedroom, which is the crib room, and all the electrical outlets are at shin level. So the first thing you have to do is cannibalize a short extension cord so you can move the device up to a convenient level surface where you can watch the side of the device with the WPS button. Now plug it in. The Led light on the side will start to blink green. Wait about a minute until it starts to blink orange. Press the WPS button on the side of the router. Press the WPS button on the side of the Range Extender, and watch the LED on the FRONT of the device: It will start to blink green, and turn to a solid green. Hurray! The Push-button, One-Touch connection has been made. If it starts to blink orange, the connection was not made and you have to do the button pushing again. If you never get a solid green, then you have to do the browser based setup just like the WPS buttons were never there in the first place. Assuming that the connection was made, and you have a dual mode router that broadcasts in both 2.4 GHz and 5 GHz, you do the push-buttons sequence again for the 5 GHz signal.All that is conjecture on my part, because my router, the DSL router from Frontier, does not have a WPS button. I haven't figured out how to apply the instructions for the browser-based set-up sequence yet, and will report on that anon.I did manage to get the extended setup process to complete, but not without tumbling into a number of pitfalls. I switched my computer from wired to wireless operation, plugged the extender into a nearby end of an extension cord, waited until the blinking green front light turned to a blinking orange light, and then changed the wireless connection to the Linksys Extender setup-XXX as instructed launched setup by using the browser to go to [...], as instructed in the setup sequence guide. The guide says to "be sure to choose 'as a wireless range extender' 1when asked how you want to use your range extender". Then the guide says to follow the on screen instructions to complete the set-up process. No further step-by-step guidance is provided and you are left to your own interpretations of what the on-screen instructions mean.The first page is fairly straight-forward. It asks you to create an Admin password. You type it in once, and then a second time, and then a hint to help you remember the password. Then click save and it advances to the next page where it does a lookup of the available Wi-Fi signals. You choose the one you want which you want to connect. Then it asks for the network password. What the hell is that, I ask? I just made a password, so it is asking for the similar password on my modem. It never worked. Finally, I logged into my modem my self, and discovered again that I had to give it a user name as well as the password, and the device only had modem SID and the password. So what single piece of data could it want to connect to the modems Wi-Fi? Oh, yes! That would be the Public System Key, which definitely is not the modem's password. So, I tried again, using the PSK. A rotating icon of a circling blue rectangles appeared to signify that it was working and then it stopped and hung there for a while, and finally a new page appeared to say it had extended the 2.4 GHz band and asked me to select the name of the 5.0 GHz band. So, I gave it the SID of my modem, and the PSK and it came back saying that no connection could be made. I tried several times, same result. I tried going into the manual setup, but that was no help and I could not get it to complete the process with just one network extended. I eventually called support. The system engineer asked me to let him take over my computer and he proceeded investigate the modem and tried a number of time to get back into the extender device setup program, but could not and by then my computer lock-up and had to be rebooted. So I terminated the session and my advice is to never let them take over your computer. We had concluded that my modem had only the 2.4 GHz band, and the extender device needed to be reset to factory settings.After rebooting my computer, I attempted to reset the extender device. Again, this did not happen on the first attempt. I finally concluded that you had to let it get to the blinking orange state, the poke the reset button with a bent paper clip, until the blinking orange light went dark and the blinking green started. Then it worked as a clean device. I got to the part where it was ask about the 5GHz network, carefully looked down the list of options, and found the button that said I don't want a second network, clicked that, and it went on to complete the process. I captured the summary of the setup parameters, and pasted it onto the bottom of a text page of the modem's parameters. All is well, I thought.But, after I was writing up the review, I thought I should go back and do it all over and write down exactly what was on those pages. So, it is back to a reset of the extender device, connect to the extender setup signal, start the process again, writing down the exact words of the prompts, and suddenly and error page pops up and say the connection with the computer has been lost. I will wait until the signal returns. My computer says it is still connected. But I disconnected, reconnected, still nada. Finally, I reconnected with the little box that says to reconnect automatically checked, and the error page went away. Then another error page appeared, saying that modem had quit working and please reboot it. So I did that. And I retried making the connection. That didn't work, so I tried putting the connection data in manually. Still nada. Finally, in frustration, I clicked retry again, and it worked. At this point, I decided that both these two problems were caused by the extender device itself, and it's extension software was really not ready for the casual public. So, if you are not quite familiar with Wi-Fi and advanced computer operations, then do not buy this product. The chances that you will get it to work is pretty small. Wait until both the setup software is improved and the user guide is expanded to handle all of the possible distress points. The nerds among us deserve whatever adventures we get ourselves into.I will report about the details of the range extension anon.