Honeywell 770030L North 7700 Series Half Mask Facepiece, Large, Black Silicone

This is an early-stage, tentative review, as I have not had much chance to test this item out in the real world. But I like to explain things, so here are first impressions.First off, I have a big head, like a 7 and 3/4 hat size, so I instinctively bought a Large. I feel it was the right decision, though a medium may have worked. The item box included head-measurement diagrams on the exterior. This would have helped for choosing a size in a brick-and-mortar store. I wish Amazon included this diagram in the description. The website is northsafety.com but none of the browsers I tried just now (to provide a link to the chart) would even connect. Go figure.For head measuring, it's mostly about the distance between your chin and the bridge of your nose at the very top.Above 12.5cm, you're a definite L. Below 10cm, a definite S. Between 10cm and 12.5cm lurk the S/M, M and M/L folks.The feature that fine-tunes this respirator to your face is that there are four very adjustable straps on each device, so there's tons of opportunity and leeway for adjusting and getting a precise and tailored fit. I assume most respirators in this price range have such adjustable straps but this is clearly a crucial, positive feature.So, for the scull-cap, the right and left side straps can be adjusted.And for the clasp that goes around the back of your neck, the right and left side straps can be adjusted. The straps are thick and sturdy, easy to adjust and can be repeatedly readjusted, if that becomes necessary.Once adjusted properly, you just place the scull-cap over the top of your head, pull the neck straps around the back and secure them. I found it took only three or four tries to be able to feel my way around and connect the neck clasp without anyone else's help, or any fuss. It's obviously designed for taking on and off again without any assistance. These straps and how they work get 5 stars from me.The triangle on your face: it is made of silicone. Not just the contact parts, the entire thing. It is soft and squishy and this is why people like it. It might stick and sweat but it does not abrade your skin. So if you're going to wear this item for 8 hours, this is definitely the material you want rubbing against your face.As for the weight, I've not worn it long enough to comment. And everyone's nose bridge varies, so the pressure and possible discomfort there will vary too.With the filters, yes, it's much heavier than, say, an N95 Aura from 3M. As other commenters note, muffled speech will be a problem.But once adjusted to my face, which did take at least a half an hour of trial and error, it felt comfortable on my head and seemed to form a proper seal.Again, this is my first impression out of the box. I hope to come back later to comment on use in the wild.This post relates to my use for respiratory virus protection.

For those dealing with smoke from wildland fires, for those working outdoors in the dust and dirt of dry weather, or those sanding or sawing materials creating dust, this mask along with the North 7531N95 Filter Assembly, this mask is so effective that even on the most smoke-filled days I cannot even smell the smoke AT ALL! If I lift the mask slightly I can immediately smell just how strong the smoke is! Even when the sky is grey and I can barely see the hill that is less than ½ mile away, I can work for hours outside with no ill effects at all from the smoke.Beyond that, the inhale valves under the filter attachment points and the center exhale valve work so well that there is virtually no difference in my ability to breathe even when doing heavy work like digging or swinging a heavy pick.FIT: The distance between the top of the bridge of my nose and the bottom edge of my chin is about 5.5 to 5.75 inches with my mouth closed. I also have a nicely trimmed beard (about .4" hair length). The large size mask puts a bit of pressure on my nose at the top area of the mask. It takes some careful adjustment of the straps to keep it comfortable. That very well may be just a problem with me and the shape of my nose which I broke about two years ago. But even with the mask a tiny bit loose in a few spots and having the seal interfered with a little because of my beard, it still effectively filters out all the air I breathe.This mask will last for may years and it can be disassembled easily (ever the strap assembly can be removed from the silicone body) and the mask washes up like new. I suggest getting the 10 pack of replacement filter medium. And in the long run, if need be, even the flapper valves can be purchased separately.Protect your lungs - get this mask!

It's very comfortable compared to many other brands. Extremely adjustable, just don't tighten it too tight or else the clips are sure to break. Rest assure though, you can definitely tighten it enough to the point where it's more than sufficient. Price is a bit high, but then again, so are many other brands. Keep in mind, although you can most certainly find cheaper ones, many have solid material against your face, while this one is, I believe silicone, which is much softer in comparison. I would definitely recommend!

This thing fits like a glove. Very comfortable and feels well-made. I haven’t used it yet but look forward to very comfortable long day with it. The filter elements needed to be purchased separately. The only con for this would be how the filters are attached. You have to screw them on versus 3M’s quick half/quarter twist. If not careful, cross threading or over-tightening are possible, which may damage the threads.I also have a 3M version as well (7501). Comparing the two, the Honeywell feels and looks better. Again, the only con is how the filters are attached. I feel that attaching the filter to 3M is much simpler and quicker. Otherwise, I really love how the Honeywell mask fits over 3M.

Great deal, awesome price and fast delivery!! Perfect fit!!