Orion Motor Tech OMT 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RD06)

Great set has popped off ball joints from the mount numerous times. Today I even used the big one to press out the ball joint to replace it . Be warned one of the tools has a sharp point to keep the tool from popping off but some bolts are flat and don’t have the dimple to accommodate the point so it digs a hole and in my case deformed the ball joint bolt so it couldn’t be used.

Great price and quality. Works great

Solidly built, deep threads, smooth business ends.

Nice cheap Chinese tools. They did the job and I added them to my arsenal. Fit and finish is what you’d expect from drop ship tools made in china. However, there was zero issues popping the ball joints on my 2020 Ram 1500. The attachments were on the small side. If you have a large vehicle, you’ll likely need to use the adjustable puller. Was a bit sketchy lol. Looking to save yourself a few hundred instead of taking your car to the shop? Then these are a solid buy. I don’t know if I’d buy these for professional use though.

This tool is good quality. We removed lower control arm ball joint with ease. Easy to use, very straightforward. The tool did the job for us. Would highly recommend.

Great tools to make mechanic work easier

EDIT-updated from 2 star to 5 star I reached out to OMT directly about the broken tools and they responded quickly. They shipped out a replacement with a lead time "around 3-7 business days". It arrived the very next day. I was finally able to pull the pitman arm after 2 weeks of wrestling with it. It was rusted in place but these tools broke it free. I'm leaving my original review below for reference. I'm not sure if was user error or faulty tools, but OMT came through in the end. ORIGINAL REVIEW: Four of the five tools broke while using them. The 5th tool (separator) only survived because it wouldn't fit around any of the ball joints on my 1992 Toyota Century. The large claw puller was able to move the pitman arm down a few mm before cracking. I used an obscene amount of silicone grease on the threads. I didn't use an impact wrench. The joints have been sprayed with PB Blaster several times daily for about a week. I did everything I could to give these tools a fighting chance and they still broke. The large adjustable puller bent out of alignment on the first try. The arms are no longer even and do not sit flat making it useless. The bolt on the smallest puller sheared when I used a tube as a breaker extension. I had to use a hacksaw to cut it free. The large puller was the perfect size for the pitman arm. I went super slow with the tube extension, tightening a half turn or so before backing off, hosing the steering column down with penetrating fluid, and then tightening it again. Using this process, it moved a few mm before the claw snapped. I tried my luck separating the ball joint side of the pitman arm with the small puller. Using only a wrench (no extension) the claws began to bend backwards. I expected a little bit of a hassle when using these. Even one broken tool would've been understandable, but four? The metal used is of terrible quality. I do not recommend.

NOT a high quality tool. Nice case they came in. The tools look nice, but that is the extent of the pro's. The throat on the tie rod end puller is shorter than would normally be needed and the threads on these items are coarse and sloppy so I do not believe they would take much torque. If your parts came apart easy these will probably do the job, but if that was the case you wouldn't need the tools in the first place. They looked and sounded nice, but will not do the job in my opinion. I do not recommend them.

السعر مبالغ فيه جدا

Used on front suspension of VW Touareg. Better than expected and removed the ball joints without any risk of damage to the rubber boots

Bref sa m’a sauver la vie très bonne qualité rien à redire

I used the Ball Joint Separator and Puller to replace the steering spindle on my SUV, and it worked flawlessly. The tools are solid, well-built, and made the job much easier than I expected. The different attachments fit perfectly, and the leverage on the pullers is excellent. Saved me a lot of time and frustration. Highly recommend this set for anyone doing suspension or steering work at home.

Las herramientas se ven de gran material y de buena durabilidad, de momento gran producto