GLISTON Paintless Dent Removal Glue Sticks Hot Glue Sticks Paintless Dent Repair Tool for Car Repair Dent Remover Tool Set - 5 PCS Black & 5 PCS Yellow

I have a folded in rocker panel in the center of my car that has broken my heart. I started researching and practicing PDR to fix it.So far i've been doing quite well and it's almost completely repaired with this glue. It's the only glue that has the strength to create a strong pull to get the metal back to it's original shape.It comes at a price as it's cheap but not super cheap. Thankfully each stick is very long! Though I had to purchase a really good glue gun to properly use this stuff. But after doing so, performance has been VERY GOOD.Don't use a cheap crappy glue gun. It'll make doing PDR much easily with a quality Glue gun.I've used about 2 sticks so far and it has almost fixed the bad damage so 10 sticks should definitely be more then able to fix it.Highly recommend this stuff. Make sure you follow the requirements and exceed them for best performance! I use a 300watt glue gun that is industrial grade. Gives me more time to apply as this stuff likes to harden FAST!So far Alcohol 91% has done a great job at mostly cleaning this stuff up. Sometimes it can be a fight and this stuff is strong enough to remove paint so be careful.

Wow! I read the reviews and was a little concerned about the quality. The dent puller however worked great for me. The tool is actually a much better quality than I expected and the glue worked great and came off fine. I didn’t even need alcohol, just picked at it with my fingers and it came off fine with no paint damage.For the actual dent removal I found yellow glue sticks worked best. I glued them to the plastic end, then placed the plastic part over the dent. Waited about 3 min then gently squeezed the handle til it popped. Worked awesome.

The gliston paintless dent repair glue sticks, black color, works. I am glad I bought this Amazon choice pdr glue. It works for me.,

Instructions are generic and not for a specific item. They don’t tell you what the difference is between the black sticks and the yellow ones so I started with the black ones because they seemed like a stronger material. It was definitely strong. Spraying alcohol on it does nothing and the scraper is too flimsy to make a difference. Reheating the material just makes it smear. I assume it’s oil or petroleum based because once it finally came off it took the clear coat with it. The yellow stick was actually stronger and hardened to the point where I couldn’t get the attachment head off of the truck. That material had to be removed with a heat gun as well and it smeared substantially worse. Maybe it’s not meant for 14 year old clear coat but I would save your money and get suction cups or a regular glue gun. Now I have the same dents and missing paint.

These glue sticks are large. They are not made for a common glue stick gun. I don't remember if it said the size?. So I went and bought a commercial gun. Don't make the mistake it fits a common gun. THESE ARE NOT PDR GLUE. DO NOT BUY FOR AUTO.

This dent puller kit is awesome! I was skeptical, but it works just like other reviewers have said. I think mine actually worked a bit better. I used this dent puller kit on a motorcycle gas tank. The dent was about 6-8 inches wide. It took about hours and thirty gluings to complete. Which is actually what you want. You want to be able to work out the dent little by little and not one huge pull which will warp the tank and create a bubble. Anyway, something to be careful about is which glue stick you use. The black one works slower but it’s better than the gold one which pulled my paint off. So be careful. If you don’t care about the paint then use the gold sticks. Anyway, this is a great product which worked well for me and probably saved me five hundred bucks if I’d gone to a body shop. Awesome product, very strong! Thanks for the great tool and saving me money!

I am pleasantly surprised that this actually works. Very simple and effective. I was not able to achieve perfect results, but I was able to remove 80% of a large dent that was at the roof/side junction on my wife's Kia Soul. The dent is in a really bad spot and was really ugly, but now, while still noticeable, it's a vastly improved. The glue really sticks and it did remove the clearcoat in a couple of spots, but that was easily repaired. Take your time and follow the simple directions and this kit really works. To get the glue off of the car I used a hair dryer to soften, then used the included scraper, and then a citrus cleaner to remove all residue.

Toy or Tool? I would have returned this immediately except I needed new tips for an actual dent puller. It is easy to see why folks have bad results with this kit. The "glue Gun" uses a very small glue stick. It is almost impossible to get a hot enough surface to do a good pull with. I gave the glue gun to the wife for light arts and crafts use.