Please Note: These are made in a variety of sizes, depending on your needs. Determine your screw size, and order the corresponding size in the Toggler. By the way, The Toggler Snaptoggle is a terrific asset in mounting things which are fairly heavy. Mounted a 4 ft. long tool holder.......with these things. As you can imagine, the total tools stored in the rack are pretty heavy......and it did and continues to do a great job of keeping them securely in place.

قم بتنزيل التطبيق

نحن مصدر العناصر من

الإمارات
UK
الهند
USA
اليابان
KOREA

خدمات العملاء

معلومات عنا

دعم العملاء

Desert Online General Trading LLC

Dubai, United Arab Emirates

TOGGLER Mechanical Plastics 50375 0. 48cm - 60cm Snaptoggle BA Hollow Wall Anchors

TOGGLER Mechanical Plastics 50375 0. 48cm - 60cm Snaptoggle BA Hollow Wall Anchors

Q: Do they come in any other metal than solid 28 karat gold?

It's zinc played steel. Not 24 karat gold.

Q: Will it still work if I snip the end of the bolt? There is a brick wall behind the draywall I am anchoring to, and the bolt is too long.

Yes, as a general rule, you can always cut machine screws shorter as long as you are careful to clean up the cut end after you cut them. One trick is to thread a nut on the screw before you cut it, then unscrew it after you make the cut, the nut will straighten out any rolled over threads on the way off the end. Or, you could cut carefully with an abrasive wheel or dress the end of the screw with a grinding stone. Even better, chase the threads with a thread cutting die. Or, just go to the hardware store and buy a shorter screw. This toggle uses 3/16-24 (often called #10-24) screws. Available in a variety of lengths pretty inexpensively.

Q: Will nylon strap togglers work on a fiberglass shower to hang a fold up seat?

I would be concerned about this application for a few reasons. If I assume that you are going to have something behind the shower surface itself, such as some seriously thick plywood to provide the backing, then I still have to make a point about the physics involved here.Togglers, and any fastener really, are rated for a certain weight. If you are hanging a microwave, that weight is fairly static and easy to calculate.You are talking about a seat, and the problem with seats is that humans sit in them and their apparent weight due to the acceleration of gravity is more than the weight of the individual upon impact. I could pull out a lot of math, but suffice to say that a 200lb person who plops down into a chair, is putting far more than 200lb of strain on the chair at the moment of impact and this is likely to cause something to break and someone to get hurt. This is why I can drop a bullet and it won't go through anything, but if I accelerate it - it can pierce steel - and bullets don't weight 200lbs. You can obviously overbuild the solution, but keep in mind that the shower is a very wet place, and wood can rot over time and result in a potentially fatal situation if things go poorly around hard slippery surfaces.So I think the answer is yes, but you are going to want to over engineer your solution and then make it waterproof to a paranoid degree to ward against catastrophic failure or injury. If the backing behind your shower is not robust enough, it will be like trying to mount a massive TV on sheetrock - the material will give and the mounts will simply rip out of the wall as soon as someone sits on it.

معرّف المنتج: 254001044

معاملة آمنة

التفاصيل

Size
1
Colour
Clear
Material
Alloy Steel
Brand
TOGGLER
Item dimensions L x W x H
26.4 x 19.7 x

🔩238 lb tensile strength drywall hold

🧰Fits 3/8"–3-5/8" hollow walls

🛠️One-person quick install

يُشترى معًا بشكل متكرر

TOGGLER SNAPTOGGLE Heavy-Duty Drywall Toggle Bolt – 3/16"-24 UNC Zinc-Plated Anchor for Hollow Walls, Plaster & Tile – Holds 238 lbs in 1/2" Drywall, Easy Install – 10 Pack (with Bolts)

TOGGLER SNAPTOGGLE BB Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, for 1/4"-20 UNC Fastener Size (Pack of 10)

TOGGLER Toggle TB Residential Drywall Anchor with Screws, Polypropylene, Made in US, 3/8" to 1/2" Grip Range, For #6 to #14 Fastener Sizes (Pack of 20)

الوصف

🔧 Secure your space with the ultimate snap-and-lock anchor!

REINSTALL WITHOUT RISK - Anchor stays put when bolts are removed, allowing fixture swaps without losing grip or needing new anchors.
UNIVERSAL FIT FOR HOLLOW WALLS - Automatically adjusts to wall thickness from 0.48cm to 60cm, perfect for drywall, gypsum, and concrete block.
CORROSION RESISTANT ZINC PLATING - 7x more resistant to rust with 350 hours salt spray protection—built to last in any environment.
HEAVY DUTY HOLD ZERO COMPROMISE - Supports up to 238 lbs in drywall and 802 lbs in concrete block for rock-solid mounting.
EFFORTLESS ONE PERSON INSTALLATION - Pre-assembled toggle anchor installs behind walls with no extra tools—snap, lock, done.

The TOGGLER Mechanical Plastics 50375 Snaptoggle BA Hollow Wall Anchors deliver heavy-duty, reliable fastening for hollow materials like drywall and concrete block. Featuring a pre-assembled toggle design, they enable quick, one-person installation with no extra tools. With a tensile strength up to 238 lbs in drywall and superior corrosion resistance, these anchors ensure long-lasting, vibration-resistant support for your fixtures. Perfect for professionals demanding secure, reusable, and hassle-free wall mounting solutions.

المواصفات

Fastener type	Snap Bolt
Head style	Hex
Finish type	Zinc Plated
Shape	Toggle
Item diameter	0.38 Inches
Thread size	3/16"-24 UNC
Number of pieces	10
Compatible groove diameter	0.5 Inches
Global Trade Identification Number	00036296503758
Set Name	Set of 10
Manufacturer	Mechanical Plastics Corp.
UPC	852661440011 680063729614 036296433116 700604238853 036296503758
Part number	50375
Item Weight	181 g
Item model number	50375
Color	Clear
Style	Toggle
Finish	Zinc Plated
Item Package Quantity	1
Head Style	Hex
Cutting Diameter	0.38 Inches
Measurement System	Inch
Batteries Included?	No
Batteries Required?	No

لديك سؤال؟ انظر ماذا طلب الآخرون

Do they come in any other metal than solid 28 karat gold?

Will it still work if I snip the end of the bolt? There is a brick wall behind the draywall I am anchoring to, and the bolt is too long.

screw size

Will nylon strap togglers work on a fiberglass shower to hang a fold up seat?

الأسئلة الشائعة

هل المنتجات أصلية وحقيقية؟+

نعم ، يتم الحصول على جميع المنتجات مباشرة من تجار التجزئة المعتمدين في الولايات المتحدة والمملكة المتحدة والإمارات العربية المتحدة والهند. نحافظ على عمليات مراقبة الجودة الصارمة والتحقق من كل منتج قبل الشحن. جميع العناصر تأتي مع ضمانات الشركة المصنعة المطبقة وتغطيتها سياسة الإرجاع القياسية لدينا.

كم من الوقت يستغرق التسليم وهل هو موثوق؟+

تختلف أوقات التسليم حسب بلد المقصد ، والتي تتراوح عادة بين 3-9 أيام عمل. كل طلب يمكن تتبعه بالكامل من خلال نظامنا. نتعامل مع جميع التخليص الجمركي ونستخدم شركاء Courier الموثوق بهم للتسليم في الميل الأخير. ستتلقى تحديثات منتظمة حول حالة طلبك عبر البريد الإلكتروني وتطبيقنا.

ما هو Desertcart؟ هل من الآمن الطلب من؟+

DesertCart هي منصة للتجارة الإلكترونية الدولية التي تعمل منذ عام 2014. نقوم بمعالجة الآلاف من الطلبات على مستوى العالم كل يوم. يمر كل منتج من خلال عملية التحقق من الجودة قبل التسليم ، ونحن نقدم تتبع الطلبات الشاملة ، ودعم العملاء على مدار الساعة طوال أيام الأسبوع ، وسياسة إرجاع شاملة لضمان تجربة تسوق آمنة.

كيف يتم حساب تسعير المنتج؟+

تشمل أسعارنا تكلفة المنتج والشحن الدولي وواجبات الاستيراد والتخليص الجمركي ورسوم التسليم المحلية. نتعامل مع جميع إجراءات الجمارك والاستيراد ، ونضمن عدم وجود رسوم خفية عند التسليم. يتلقى الأعضاء المحترفين مزايا إضافية بما في ذلك الشحن المجاني.

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

تسوّق عالميًا، ووفّر مع Desertcart

قيمة مقابل المال

أسعار تنافسية على مجموعة واسعة من المنتجات.

تسوّق عالميًا

خدمة ملايين المتسوقين في أكثر من 100 دولة

حماية معززة

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

ضمان العملاء

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

تطبيق Desertcart