DUSICHIN DUS-003 Snow Foam Lance Foam Cannon Spray Gun Wand for Pressure Washer Car Detailing Black

It arrived promptly, the build quality seems to be on par with most power washer accessories. I've used it several times and so far and it performs well. I'm using it on a small gas powered 2000psi x 1.8gpm machine. It will spray a nice 4ft wide fan at close range and throw over 25ft when the nozzle is opened to stream.Take just a few minutes and play with the siphon mixture adjustment to get a clear feel of how much fluid your pulling from the bottle. With the siphon turned full open it will empty the bottle in about 10mins of spraying or less. The plus & minus markings with arrows on the siphon adjustment knob seemed counter-intuitive on mine, Clockwise = more soap suction (see photo). Two ounces of Chemical Guys shampoo diluted in a full bottle of warm water seems to deliver a nice thick foam with the suction adjusted high. One ounce in a little over half a bottle is plenty to foam down a car for a wash in my experience. Seems like with siphon adjustment and changing your dilution ratio you can get a mix that works good for various situations. Run some clear water through it after use to avoid eventual soap build up cutting down the suction flow, seems to clean up easy. Several reviews had mentioned the bottle breaking, the bottle seems to be of decent quality on mine. It does weigh a bit when full so dropping it or waving it around very rapidly could produce enough stress on the plastic. Looks like it's a standard bottle thread so replacement shouldn't be too much trouble if or when needed.So far this "foam cannon" does exactly what I expected it to do - I would purchase again.

Foam is great. But the foam and gun combo doesn't come with the different nozzles which is kinda misleading from the listing

I purchased a DUSICHIN DUS-003 foam cannon in January of 2017 so I have quite a few uses and I gave it a 4 star overall rating, a two star rating on money value and a one star rating on quality of material because although it works well, it is easy to use and it produces a nice and tick foam even with regular car soap, it leaks at the quick connect on the handle. The foam cannon is rated at 3000 PSI, I am using an electric pressure washer rated at 1800 PSI and it leaked from the O ring at the handle from the first time I used it. Perhaps a slightly different O ring would fix the problem but I am not sure. The water shoots out at a considerable pressure from the handle and if you are not aware of the problem it has the potential of injuring someone especially if you get a blast of it in the eyes, therefore I strongly suggest the use of safety goggles. I don't know if the newer model has addressed the issue.

I was skeptical when purchasing this foam cannon. The price was just too low!Was I wrong! This thing really makes the foam! It took 30 seconds to completely cover my truck with foam. There was so much soap foam, it was difficult to know who made the truck.If you need a foam cannon, this is a deal!

I needed a foam cannon to wash my stable of cars at home; only someone as self-loathing as I would own five older model German vehicles. So inherently, after not washing anyone of them for weeks, I was pretty happy to have my packaged delivered on a Friday. Everything fitted well with my electric Ryobi pressure washer, I was surprised I didn't run into any issues and need to purchase any adapters/fittings. Only problem was after washing the car down, the handle started to pour water out - I hadn't even used the foamer yet! Wanting to finish what I started, I tightened the fittings one more time and the handle kept pouring water out. In the end, I disassembled it between washing and found the leaks. It's not a very well made product and could be further refined through some sort of quality control. The thread sealant used looks to be some type of glue that hardens when dry. The leak ended up being a manufacturing defect in the threaded portion. After a lot of teflon tape and liquid sealant, I fixed the leaks.Update: Today a new issue developed with the bottle - the fittings are now leaking and will probably need the same treatment​.

Well I read some reviews that caused me some concern for this purchase. However for the price I thought I would give it a shot, First of all no leaks.Secondly this thing put out foam like shaving cream. I mean it foamed in thick, deep heavy suds and stuck to the car. I use Chemical Guys soap about 5-8 ounces in the bottle and then added water. The adjustment knob worked great. The quick release fittings did not interchange with my gas pressure washer but the hose fit perfectly. I just swapped wand for the cannon for the rinse. It took longer to rinse the car than to foam it. It was shooting foam from 6' away. It covered so completely you could not see the wheels, windows or color of the car. I took a wash mitt with a 4' handle and then went over the car. That took less than 5 minutes. It took longer to setup my pressure washer and get the supplies out than to wash the vehicle. I am sold on foam cannons. I believe if you use this regularly you can almost have a no touch car wash system. I live in the south. We have tons of pollen, rain and dust. I have been washing cars for 50 years without this. Not anymore.