Measureman Fully Stainless Steel Bimetal Dial Thermometer, 3" Dial, 2-1/2" Stem, 50-550 deg F/10-260 deg C, -1% Accuracy, Adjustable, 1/2" NPT Back Mount

The gauge looks well built and works great. The only issue I have is the listing should be more clear as to what size the stem is and what size fitting it screws into. I was replacing one with 1/4 inch and this one was 1/2 inch. Just had to remove the 1/2 to 1/4 reducer but this meant draining the tank down. Not a big deal but would have been nice to know in advance.

Nicely made

In response to the reviewer who wrote, "The threads are not 1/2" but 3/4". " They simply don't understand with what they are working. These thermometers are listed as having a 1/2" NPT (National Pipe Thread) fitting. A 1/2" pipe is 1/2" on the _inside_. Pipes have a wall thickness (otherwise they wouldn't be a pipe). Therefore, the size of a 1/2" NPT fitting is quite a bit larger than a 1/2" SAE (Society of Automotive Engineers) bolt. These thermometers are exactly as described, not cheesy, work well, and will gladly buy these exact ones again if the situation ever arises.

I live in Arizona so finding a spring type thermometer is always a challenge this one is very good I use it on my motorcycle determine what the air temperature is I need something with a halfway point at 120.

Shipped in a timely manner and just what I ordered

Needed a sensor that would not obstruct flow, but did not want it to be isolated in dead-end leg with no exposure to flow. This was the perfect length for use in a 3/4" hot water line, installed in a threaded bushing that is sweat into a Tee fitting.

Arrive quickly and on time.One box with each item in it's own bubble wrap bag.I chose this one because it's stainless, it's adjustable, the scale that I wanted, the size I wanted and the stem length I needed.The weight and construction indicates quality.First I calibrated both in hot water using a mercury type meat thermometer.Fit the 1/2" NPT perfectly.

Great thermometer! I bought two and realized one of them wasn't properly calibrated. The one that was in good shape was great! The second one I returned. Best in my opinion in regards to the size, stem, etc.

I attached this to my food dehydrator by drilling a small hole for the stem, so I can keep an eye on the temperature since the thermostat is not calibrated in degrees.

This good quality thermometer that I want to install in my lab. The temperature sensor is a bit too taut for my needs, so the wall in the place of the installation will be thinner. I am very pleased with this purchase.

Il manque pour moi une clip pour retenir le thermomètre.

No mide la temperatura del agua

The Thermometer was as advertised and was an exact fit. it arrived when promised