Wall Control 30-P-3232W White Metal Pegboard Pack

I was pleasantly surprised by the quality of these metal pegboard panels. They feel sturdy and well-made, not flimsy like some others I’ve seen. Installation was straightforward, and they mounted securely to the wall. The slots are evenly spaced and work well with standard pegboard accessories, making it easy to organize my tools and keep everything within reach. The clean metal finish gives my workspace a neat, professional look. If you’re looking for a durable and attractive way to organize a garage, workshop, or craft room, I would definitely recommend these. They offer excellent value for the price and have made a big difference in keeping my space organized.

Recently reorganized my workshop area and had some wall space. I was planning on hanging some more traditional peg board when I came across this. I liked that it was metal and wouldn't really require any framing/spacing from the wall, so I decided to give it a try. I got the "galvanized" silver color and it looks great. The panels arrived in great condition (including mounting hardware and a few pages of mounting instructions); no discoloration or imperfections in the stamping/cutting. Mounting the panels was fairly easy. I didn't want them directly next to each other and my studs are 24" apart so, per their instructions, I mounted one side into the stud and the other with the included drywall pegs. The screws are substantial; they didn't cheap out with the hardware like a lot of other companies do. I placed a few 2x4s on edge on top of my work table and rested the panels on top and used my spirit level to make sure the panels were straight. With one hand holding the panel against the wall, I marked all 6 holes. Drilled pilot holes into the studs on one side and mounted the drywall anchors on the other. Then I screwed in the top two screws, removed the 2x4s and finished the other 4. Each panel took about 8 minutes to mount. I already had some traditional peg board on my workbench, so I started by using some extra standard hooks (2" and 4" long) I originally got from a dollar store. They fit into the holes just fine. The metal panel is very thin so the hooks tend to "hang" a little lower so the stems sit at a downward angle. I bent a few of the longer hooks upward a bit to keep the tools from sliding. I was expecting that, so it wasn't a big deal. I also purchased a large collection of various peg hooks from amazon. These are single peg hooks so they were a bit more frustrating to add. The fact that they were "looser" in the holes and were just in a single peg meant there was a lot of movement and the hooks would easily pop out when I removed a tool. I didn't want to use the clip locks that came with them (since they take up two adjacent peg holes) so I ended up wrapping some thin wire I had around the vertical slots (for their proprietary shelf/hook accessories) to hold the peg hooks in place. It works well and is WAY cheaper than buying the "official" expensive Wall Control accessories or the thicker, more expensive peg hooks. I have quite a few tools hanging on the panels so far and they still look and feel rock solid. They hold the weight in the peg holes without warping or bending and the panels are held fast to the wall. Overall I'm happy with my purchase and I plan on getting a few more of these panels later on to fill in some more empty space. PRO: -much more durable than traditional peg board -compatible with standard peg accessories -very easy to mount -looks good CON: -thinner than traditional peg board so traditional accessories are looser -proprietary Wall Control accessories are ridiculously expensive

This is the star of my kitchen now. Our walls are plaster and lath so all we had to do was screw it in. I’d say the color is even better than in the pictures. It’s deeper and more satisfying to look at. The metal is thick. This thing wouldn’t budge if our house blew up. I paired it with a cheaper set of pegs from another brand just to save money, since I wasn’t even sure what kinds of pegs would be the most useful to me. This has been wonderful for staying minimal, as it forces us to really think about what’s essential because can see everything we own like a graph. Also, I never have to dry dishes again! One less step in the daily routines. In addition, our pans were a special gift. I love knowing I’m storing them carefully and securely, yet still having them on display.

I've purchase these sheet steel pegboards before from this manufacturer. Repeat business says it all. They look good, they are solid, they support my tools without a problem. I make sure I secure the pegboards to the wall studs and I buy heavy duty accessories made with the larger diameter wire to carry the weight and to fit tight and don't come out of the holes every time you grab a tool. The pegboards are rectangular and can be position horizontally or vertically and can be easily aligned to cover a larger area. They are not affected by moisture if they are located in a damp area like some "fiber boards" do. I suppose they may corrode if they get wet over a prolonged time or located in a barn, but that isn't likely in a heated shop.

We originally used this in our son’s Lego room and it worked really well. It was easy to install, very sturdy, and the shelf options were great for organizing and displaying Lego items. We still use it, but we moved it to the garage because our son decided he wanted a different setup for his Lego wall. Overall, it is a sturdy and useful pegboard system, and it worked well for what we needed.

NOTE: Packaging and/or shipping could be better, but it wasn't worth returning for a slightly out of square soft bend in the sheet metal that I could readily fix. It came with mounting hardware options, which I did not use for my install but seemed like very good quality. I also feel like washers might be a smart thing to use (for extra security) as there is some wiggle room for lateral adjustments, but large-headed screws will suffice. There's a limit to the types and sizes of hardware that can be used because there is a very narrow slot to access the frame area to tighten down the fastener. I had planned on installing with lag bolts, but my socket size was not going to fit into the access slot. This design is meant to be used with a narrow drill /driver. These are very nice looking and a sturdy, heavy sheet metal gauge. Not too matte, not too glossy and very durable paint finish. I love the options of using standard peg hook accessories or slot wall style organizers as my storage needs evolve. I will never consider using MDF or standard pegboard sheet products ever again. Will this eventually rust if exposed to humidity out in a shed? Who cares, I'll repaint it. I expect this to last for years and years without warping, deteriorating or having the holes stripped out over time and due to weight of stored items. This was actually less expensive to buy and install compared to materially inferior products IMveryHO. No extra framing or spacers required. This was also incredibly easy to install by myself with minimal tools. When I need more I will buy this product again.

I’ll be honest, I was initially worried these might be thin or cheap quality, but I was pleasantly surprised by how heavy-duty they are. We now have these in our garage, home gym, and home office, and they are a absolute must for organization. The metal construction is so much better than traditional pressboard—it doesn't sag or fray, and the black finish looks sleek and professional in every room.

I just finished installing these panels, and they are awesome! I put two 2x4's into a cinder block wall with Tapcon screws. In the process, one of the Tapcons was stripped, but I found that you can insert some copper wiring in with the screw and fix that - worked great. Installing these onto the 2x4's was as simple as predrilling the holes and mounting. I pulled on them pretty hard but they didn't budge. I also appreciate that they're magnetic so I can attach things like magnetic pickup tools and a couple of small levels without taking up any of the holes. So many possibilities, so little time. Great buy!

Die Qualität ist recht gut aber im Nachhinein hätte ich eher günstigere Produkte von deutschen Firmen nehmen sollen. Es war eine Empfehlung von amerikanischen Kraftsportlern, die damit ihre diversen Griffe und Zubhörteile verräumen. Dafür ist es sehr gut geeignet aber kein Schnäppchen.

Había pensado instalar un pegboard de madera pero me encontré con esta marca en Amazon, llego bien empaquetada junto a los accesorios que le pedí de la misma marca y tambien de otras marcas para pegboard universal, muy sencillo de instalar, son 2 paneles y ya trae tornillos y taquetes, cada quien puede darle un uso diferente, eso es lo que me gusto de estos paneles, volveré a comprar para la cocina o garage.

made of good quality material but slightly damaged in transit

Good quality, well made in the US, rather than cheaper products made in China

I love these and various wall control accessories. I use them in my kitchen to hang my pots and pans asn utensils as I struggle to access lower cabinets due to mobility issues. These have allowed mw to keep somw independence.