Auto-top-Off ATO Solution Auto Water Filler Adjustable Float Valve Mounting for Aquarium Sump

I bought this as an extra measure to prevent my auto top up from flooding my lounge if the sensors fail . The float valve is height adjustable , well made and does the job . I have connected my auto top up pipe straight onto the pipe connection without using the push fit connector. 👍🏻

Use this to auto fill my aquariums, easy to adjust the level I want it set at. Just leave it and go, water stops at my required level.

Great product and does just what I need, but the connection is fiddly and I found it was only tight enough not to leak when facing the direction shown in the marketing picture. Overall this is good.

Looks nice with the nice clean look and works great too.

Pointless as it does not shut off water off money

Does the job but noisy (sound of water spraying) when close to shut off. This this is the case with most of these.

“Exactly as it says on the tin” perfect. Easy to set up and use. Thanks

Excellence

simple to set up and does the job.

I bought this product for the bracket. I used the bracket for lifting my high level sensor on my automatic top off. The magnetic brackets on the kamoer wouldn’t let me mount the sensor high enough but with this bracket it’s still there in case of overflow. The bracket is sturdy and doesn’t interfere with the appearance of my setup.

I wanted to write a review because of all bad press these little floats have gotten. (fresh water setup)In the pictures above, you will see where I used the blue tubing kit and I baught the extra tubing just incase I messed up.Runing the tubing (hidden) along behind the shelf, I did put in the (provided) ballvalve to cut off the water at the tank.Under the sink, I used two Ice maker line kits with the taps. One to the hot and one to the cold. This will balance the desired temp to the tank. The line tap valves allow me to adjust the temp and the preasure on the float. (This is the key).If your float bypasses after its all hooked up and full? Simply shut the preasue on the line tap valves. (problem salved).Everything you see, I got with three kits. No extra parts were used.Notice the extra "T" with valve? This is for the ice maker on the fridge. If you are worried about warm water to the ice maker? Science has proven, hot water freezes faster and cleaner.Well! I just found out I can not "Link" so. The searchable names of the products below.Malida RO Water Systems Ice Maker Kit 1/4" for Reverse Osmosis Systems and Water Filters (blue)cck cck-2 Malida Size 1/4 Inch, 10 Meters 30 feet Length Tubing Hose Pipe for RO Water Filter System (blue)2 of the LDR 509 5100 Ice Maker/Humidifier Installation Kit, 1/4-Inch x 25-Foot, Poly TubingI hope this helps for people who want an automated fill for fish tanks.

Easy to install and works great. Love how it mounts and the adjustable design.

The bracket is thick acrylic, is a good design, and can be used with the included float, or a different float sensor. It looks like it will fit over the edge of a tank with the plastic trim.