Signstek Sliding Barn Door Hardware Kit 6.6 FT Heavy Duty-Smoothly and Quietly- Easy to Install with Door Hook and 2 Handles - Fit 1 3/8-1 3/4" Thickness – Black (J Shape Hanger)

Bought this to put doors on a shed that didn't allow for swing out doors.

easy to install works great looks good

I build a custom ruff cut oak door 46"by78". I had to do extra modifications. The sliding barn door kit worked well. The door I hung has to be close to a 100 pounds. Turned out well. Very good buy.

All in all, it was exactly what I needed, but, it takes some thinking to install this, especially if you don't have an 8 foot header. You have to reinforce the wall where the holes are in the door hanger will secure to the wall I was able to do this for my shed as I had access behind the wall, but if you doing this on drywall, you may have to remove some drywall to reinforce between the studs. Also the metal screws suck - they are very cheap metal and one broke with very little torque. This could have caused a lot of issues in removing a fat screw embedded deep in a stud, but fortunately there was enough sticking out I could grab it with a plyers and screw the broken part out. Don't over torque the screws! I used a thick plywood door, so my dimensions were different that the instructions (which were scant). Just lay everything out BEFORE you start - especially before you start drilling holes and cutting the door. There are many ways to set up your door. Please note that once installed you can simply lift the entire door off the rail - it's not secure at all (if using on an outside shed or barn). So if you want to secure it (many methods), I installed a long 2x4 over the rail rollers (with maybe a 2-3mm of room), so it had room to slide, but you could NOT lift the door off the railing, as it would hit the 2x4. You also need to make/add some fasteners on the lower corners to keep someone from pulling the door outwards from the bottom. I'll try to add some photos of my project - while it's a bit of a DIY, you will get the idea and can make yours better or out of metal - I just used what I had available at the time. Keep in mind, if someone wants in, they can pry about anything off, but this keeps the riff raft out. The latch was NOT included, I added it. The only thing I used from the kit was the rail, rollers, rail stoppers, vertical metal bar fasteners (2x) and door handle, but this was what I needed. I did have to buy a new lag screw to replace the broken one as well.

Well to be honest it's started off really great and hit a roadblock.I contacted the company because there was a project that I was starting and I wanted to finish it by Thanksgiving.They got back with me with an email and sent out a replacement product I was so happy this was the best purchase that I've ever had on Amazon I give it thumbs up all the way.I never give anyone a five star but this one was so impressive I had to give it what was due thank you very much for you outstanding service hope to do business with you again sometime in the future when I have another project going on thank you again

The photos are edited to remove the seam between the 5 bars that you have to assemble. It should be clearly stated. Also, the instructions on how high to place the steel bars that have the rollers are simply wrong; the door needs to go about 1/2" higher than the instructions. Also, the instructions mistype 1 11/16 as 111/16; it makes you doubt the whole section of the instructions.Otherwise, it's a cheap option and the door did work.

Kit is well packaged and decently well made. Has more than most kits do in this price range. Very sturdy and decent instructions.A few important notes though:--You can't install on just studs. You need either a full header within your wall, or a board (~header) on the outside of your drywall (with construction screws into all studs) to install this, as shown in my picture. DO NOT install with drywall anchors-it is not OK that they include those in this kit. That will not hold any door, even lightweight.Also, if you install using a header on top of your drywall, I don't recommend using a heavy door. Try to stick with a lightweight/hollow door.One small complaint is that the mfg. Tolerances on the holes for the bolts to go in must be decently large, because there's a slight 'bump' while the wheels slide along the rail connections. Not a big deal, but slightly annoying.Another tip, we used garage door weatherstripping to close the gap on the sides since this was for a bathroom - that worked out very well.Overall, very good kit, especially for the money. I do not regret buying, and would recommend for those not wanting to spend a ton on this.

Fácil intalación y buen precio

I was looking for a sliding door for a bathroom. I found this barn door hardware and ordered it. I purchased a WPC door and installed it with a local carpenter. It took nearly a day, as it was the first time for me and the carpenter. Any way finally, the door got installed and moved smoothly. The sliding mechanism is smooth.

Thank you

Este herraje es para una puerta que construí con un peso aproximado de 25 kilos, va excelente. El acabado excelente las ruedas no hacen ruido. Para mi proyecto es perfecto.

開き戸を吊戸にしました。非常にしっかりとした作りで、重い装飾ガラス戸でも滑らかに動きます。