How do you create a user password.?

I have not used this yet, it is not waterproof (OK for outdoors) Don't remember if it had manual, but I Googled one that may be close? https://www.allsecurityequipment.com/manuals/Stand-Alone-Access-Controller-SS-TS2000.pdf I would hook it up to 12VDC on the bench, see if you can program it, before doing a permanent install.... To add a PIN user. Enter"1 User ID number # PIN #" The ID number is any number between 1 & 2000. The PIN is any four digits between 0000 & 9999 with the exception of 1234 which is reserved. Users can be added continuously without exiting programming mode To add a card user: "1 Read Card #" Cards can be added continuously without exiting programming mode

At what distance will fobs work ???

approx. 5-12mm fobs will work. thanks.

Manuel to reset keypad?

To reset to Factory Programming Password（123456）Step1、Turn off power and connect bin 2&3 of RST(S1)。Step2、Turn on power and buzzer gives 3 long buzz with green light flash fast。 If need to set Manager Card, now read two empty cards first one as Manager Add Card and Second one as Manager Delete Card with red light flashing and continuous short buzz .Step3、Turn off power, disconnect bin2&3 and connect bin 1&2 of RST。Step4、Turn on power again.

Color	Blue
Recommended Uses For Product	Home Security, Office Security
Installation Method	Self-Adhesive
Item Weight	181 Grams
Item Dimensions	4.29 x 2.76 x 0.79 inches
Control Method	Touch
Sensor Technology	RFID
Connectivity Technology	Wireless
Voltage	12 Volts
Power Source	Corded Electric
Compatible Devices	Personal Computer

UHPPOTE125KHz RFID Standalone Door Access Control Keypad Support 1000 Card Users + 10pcs Keyfobs

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة