ULBTER Screen Protector for Insta360 ONE RS/ONE R, 2 set Screen protector for LCD + 4K Wide Angle Lens, 0.3mm 9H Hardness Tempered Glass Cover

I put these on my Insta360 One RS LCD and 4K Boost lens. They went on easily and work well. The boost lens one, in particular, is very transparent and adheres well, in fact unless you look closely you can't even see it. Well worth the cost I paid for the peace of mind.

Really nice and simple to install. Thick clear glass type protective. Really happy with the purchase and highly recommended.

I previously looked for protectors that would fit my One RS screen and 4k boost lense but there were none available that would fit. I had a look again recently and found this product. I can confirm this fits perfectly on the ONE RS Screen and 4k Boost Lense.Touch screen is still responsive, although I feel like there is a bit of a delay or sometimes I needed to press twice or a bit harder. - still didn't impact the actual use of the camera and the protection it provides is very worth it, especially if you take falls a lot.When it comes to the protector on the boost lense, it also fits seamlessly, but I feel like its harder to keep clean compared to not having it on. Usually a small microfibre screen/lense cloth does the job, but with the protector applied, I feel like it doesn't remove all the smudges and you need to use a lense/screen wet wipe first. I'll see how it goes when I actually use it for a while, I'm just wary of it impacting the image quality so just keep an eye on it and keep it clean.Installation was super easy, although the wet wipes provided had dried out so I had to use my own wet lcd display wipes. I'd make sure you have some to hand.Overall happy with the product, at first look it seems it doesn't impact the footage, but I'm yet to test it a bit more thoroughly. The protection is worth it for the price you pay, especially as you get x2 of each.

The back screen protector does work with this on! Got this even when reading the comments regarding the back screen not working with the protector. Received it in the mail and noticed straight away there are 2 types of screen protectors, one for the camera and one for the touch screen. The ones for the camera are labelled "4k" and the others had no label but are thinner and more flexible.The clear difference indicated I needed the "4k" cover on the camera lens and the thinner "non labelled" one the back screen which when applied, still allowed full functionality even before updated the firmware to allow more accurate touch screen response.Just wanted to add my 2 cents as the product works great and as multiple lenses for when you need practice or need spares. And for the price, you just can't go wrong. I will be buying another pack as soon as I need it!

The camera bundle I bought included screen protectors, but apparently only for the LCD screen of the core module. This set includes protectors for both the LCD and the 4K boost lens. Great value!

Cover Ok some times you have to bash the screen to get it to work or the heat of your fi ger tips Ok

£8 at time of reviewyou actually get 4 lens protectors, 2 back screen protectors and 4 sets of wet and dry wipes. very easy to install (NB: the screen isn't square, it's ever so slightly rectangular, so make sure you line up the protector the correct orientation ie align the peel off sticker horizontal with the screen). once lined up just squeeze out the air bubbles and you're done. At this price I can't fault these 5 outta 5Hope my review was helpful

These screen protectors fit my camera perfectly and there were no issues with bubbles after fitting. The front lens cover hasn’t altered the image on screen but the one on the rear touch-screen has reduced its sensitivity too much. I suspect for the vast majority of people the front lens protector will be all they need anyway. Recommended!

Excelente protector. Dan el extra.Se incluyen2 protectores cristal para cámara 4k2 protectores cristal modulo de procesamiento2 protectores plásticos para módulo de procesamiento4 Kits de pegatinas para retirar el polvo4 Kits de limpieza húmedo / secoMuy buena calidad y muy completo el paquete.

Update 10/3/23 - Had my camera on a chin mount dirt biking. Completely front end stuffed a berm and ate the handlebar head first. The screen protector cracked and completely saved my camera. See the attached photos. Absolutely recommend this screen protector kit. Incredibly happy with the item.Received it today along with my One RS and applied it right away. The quality and the fit of the glass protectors was so perfect I had to make this review to offset some of the negative comments I read.Bottom line - the pieces lay completely flat with zero bubbles or any fit issues, but the touch screen is slightly negatively affected. It's always a gamble with Chinese no-name products, but this one you absolutely get more than you pay for.The glass protector corners are perfectly rounded and the edges are nicely beveled smooth. The core lcd screen protector is rectangular and the 4k lens protector is square so there's no mixing them up. They each leave about 0.5mm relief from the border of the original glass so it you take your time and position it right, they lay absolutely flat and come out looking crystal clear. I never used the touch screen without the glass protector. The touch screen works, but it's definitely not as responsive as the normal cell phone. With the screen being so small, I'm not sure if I'm fat fingering it or if it's a sensitivity/responsiveness issue with the extra layer. You have to be deliberate about your swipes and sometimes needs a couple tries, but overall I had no problem using the touch screen to navigate settings with the protector installed.The camera is brand new to me and I have not used the touch screen or recorded any videos prior to applying the glass protectors so I can't comment on how much worse the touch screen is or if the glass affects video quality. I'm not a picky guy and don't get lost in the weeds with settings and options. I got this camera to record dirt bike rides so I'll probably pick some middle of the road options, set it and forget it.The items come in a nice reusable plastic case and they give you plenty of wet and dry screen wipes and lint stickers. Each protector is in its own foam sleeve and they each have a tab to make peeling off the backing extremely easy. My kit came with two extra plastic protectors shaped for the core lcd screen. I'm not sure if they included this as an alternative to the original glass protector to help with the touch screen sensitivity. I haven't tried the plastic protector yet as I went with the glass one. In all you get two glass protectors for the 4k lens, two glass protectors for the core lcd screen, and 2 plastic protectors for the core lcd screen.Just wanted to add my two cents on such a thoughtful, well put together, and quality product. Very happy and highly recommend to protect your One RS.

Since this lens cover isn't available at the Insta360 store, I'm happy to have found it on Amazon. Comes with second set of lens covers, as well as cloths to clean lens for installing cover.

Item correspondant a l'annonce

Ein sehr gutes Set um die Insta360 RS zu schützen.Für mich die erste Amtshandlung nach Erhalt gewesen.+ Passt perfekt auf alle Komponenten+ Nicht anfälliger für Fingerabdrücke gegenüber dem Original-Glas+ Schützt zuverlässig alle Komponenten+ Preis/Leistung stimmen+ Keine negativen Effekte was die Bildqualität betrifft festgestelltEmpfehlung von meiner Seite!