IP67 Waterproof 40 Feet Range 10-30VDC Retro-Reflective Photoelectric Beam Sensor for Gate Opener, Garage Door Sensor, Driveway Alarm Sensor Switch, Protective Metal Cover Included

Great item - installed on an old Elite 3000 gate after a delivery truck had the gate close on it. Installation tips: I used normally open - test the connection of your safety loop to determine the right wires to use, use the 24V power from the controller board, install the reflector first at the same elevation as the beam and use the loose bolt adjustments on the beam unit housing to adjust rotation up and down - try and mount in a way that you can also adjust the x-axis left and right. The aiming of the unit is the hardest part of the install as it is a narrow beam. If you stand behind the beam you can see the red light from the reflector once you get close the right spot and the beam unit will click from the relay.

The product did not end up working for my needs. However, the company was extremely responsive and via numerous emails answered my questions, offered assistance and provided detailed information. Highly recommend them.

So we had an accident over this past Thanksgiving with my electrical gate, so I decided to look into a sensor to prevent it from happening in the future. Bought this and did a bunch of research on my EagleSystem to see how the 2 will play with each others.I found online manual for my EagleSystem and figured out the power source and the sensor input. The connections were fairly easy. There was a small issue I did not know until I read a few more times, the issue is during the setup I tested the sensor to see if it would works, I happened to trigger the sensor 2 times in a row, I didn't know that also trigger a cut-off circuit and thus prevent the gate from moving any further.Once I understand that I inform my family make sure if the sensor triggers the first time, avoid it from trigger a second time .... etc.This thing so far had been working for me since Christmas Day and I glad I have it

I bought this sensor to add to my newly installed CO-Z opener. There is specific wiring instructions in the customer question and answers for this product on how to specifically wire to a CO-Z opener.I initially had an issue when I first installed this sensor. It was working in reverse. It would only reverse direction when the opener was opening the gate. I contacted Supreform tech support and they recommended reversing the operation switch on the gate. That caused the gate to malfunction until I swapped the magnets around. after reversing the switch, you must also switch the location of the magnets. If the magnet was in the upper position, you need to switch it to the lower position and vice versa. Now the gate opens and closes properly and the beam sensor works as intended. It will stop and reverse the gate if something breaks the beam while closing.Would definitely recommend this product. And customer support was very helpful and quick to respond.

SE INSTALO CORRECTAMENTE PERO NO HACE LA FUNCION DE RETROCESO.

Worked great, Used this as a replacement for a wireless motion sensor for a long driveway at a vacation home for a client. Wired it in a piece or 1/2" drip tubing about 250 ft using some cat6 to the main house to a chime. Customer couldn't be happier!!

have no issues with product

Works as says, reliable easy installation, cable is long enough for most installs without having to extend. Range is excellent. I had no problem going across all four garage doors as an additional protection for someone parking in front of the garage doors and opening by mistake. (Have to use a separate relay for this application)