Artist Unknown Refill Ink Kit for Canon, HP, Brother, Lexmark, Samsung, Dell, Kodak, All Inkjet Printer, Black/Cyan/Magenta/Yellow (100ML 1Set 4 Pcs)

As advertised good value

It was great the shipping was fast and the new cartages that I got was all ready filled with ink so that was great the only thing that I thought was funny there was no instructions how to fill the cartage again I think that I can figure it out cause it will save on a lot of ink

I rated this a 4 because it did not come with instructions. It took a lot of investigating to figure it out but once I did, the print quality is very good. You will need a drill. No joking. I used a 3/32 bit (picture above, about $3 on Amazon). On the label at the top of the cartridge, just about 1/2 way down, there is a color symbol in a circle marked K (black), M (magenta), Y (yellow), or C (Cyan). It's right under that symbol where the entry port is (picture above, Yellow arrow). First thing is make sure your surface is covered and have some paper towels handy. There will be spillage. And wear gloves, it's messy. I ordered syringes separately (Picture above), you need these. If you don't have them, order them. You drill a hole about 1/4" deep at that little symbol. Make sure to wipe off the drill bit so that you don't contaminate the other cartridges when you drill into them. Fill the syringe to about 6cc. Insert the syringe in the hole and GENTLY push in some ink a little bit at a time. A bit will leak out the bottom (about the size of a nickel) but it will stop. It will take about 2 min to fill it up because you put some ink in and let it settle, put more in and let it settle. When it no longer sinks in the hole, you are done. When you are done, wipe off the top with a paper towel and put a piece of scotch-tape over the hole. Now lift up the cartridge and gently wipe off the excess on the bottom. When that is done, you should be able to touch the bottom of the cartridge to the work surface and there is no leakage. Then you're done. One instructable I read said to let the cartridges sit for about 10 minutes before use. I did that and it was perfect. Now, I don't need to do the drilling, I just remove the tape and refill each time. In the long run, this is much more cost efficient than buying new cartridges. For an initial outlay of ink, syringes, and drill bit of about $20 and about 15 minutes of time to refill these, it is MUCH cheaper than the $70 to buy a new set of XL cartridges. Filling with about 6cc of the ink, my guess is that this set will last a minimum of 3-4 years. That's a savings of about $210 a year. Totally worth it.

good price

Para el presio esta bien no esperen algo primium tendrian que comprar mas caro

This ink is terrible. It doesn't come out the right color, everything is just sort of grey. I've attached a photo of the color that's supposed to be "black." I had to completely flush my printer and replace all my ink with better ink (there are plenty of better options in the same price range.) Don't buy this crap.

Bought ink to refill ink tanks on my printer. I can't attest as to the quality as the item does not include syringes. What is waste of my time, but I have to take the hit as I should have scrutinized purchase better. When you're purchasing items offshore, buyers need to be careful and thorough.

I've just used the red so far as it's the most distinct color that would show variations in the printed color and I'm not seeing any difference. So far I'm happy with this product!

Bonne Qualité

A very large volume of ink was supplied 100ml in 4 bottles but no directions.. I guess I learned a lesson. Look at pictures before you buy.