MagnoGripPro Drill Holster – Left and Right Handed Design, 1680D Ballistic Polyester, Magnetic Storage for Drill Bits, Adjustable Strap for Secure Drill Hold, 8 Slots for Fasteners - Platinum Gray.

Bought one, then bought another to wear on other side or for other user. PERFECT fit for smaller, like 12v, drills/drivers and itholds great. You can even use it cross-draw if you like keeping the handle forward. Not much room in the pockets when drill is in place, but youcan securely stick a few screws or other small objects to the outside, to the magnet for easy access. But I bought it for the versatility of carry.Best holster I've seen for these drivers. And I like the clip for fast belt mount or slot for belt thru. One more plus, with the open bottom you can carry a hammer or prybar/wonderbar and not lose it like out of a metal hammer loop! Finally I put my larger driver in the holster, a 19.2v craftsman. I had to push it in due to resistance from the rectangular magnet, then clipped the strap 'cause it seemed a little top heavy. It works also, but not as slick as the smaller driver. So I might cut the threads and take the magnet out of one of them, like I said that wasn't the feature I was after. All told it's really a nice holster, put together really well.

Convenient, place on belt, magnet and pocket are extra good.

This is a great drill holster, great for left or right hand use. The opening in the bottom makes sliding my drill in with any type or length of bit easy to put in. The magnet was a great idea along with the pockets to hold other bits. I use it with a thick web duty belt that works well together. Easy to shift from sideto back, and when I am done I roll up the belt and slide it into the holster to pack in my tool bag.

I love this holster

From the reviews I read, I feared that this might be a little too small, but my Milwaukee 18v fits in with no problems at all. I like the buckle closure over Velcro, as the holsters I have used in the past that used Velco eventually wore out. The holster fits well on my 2" tool belt using the belt loop. I haven't tried the clip on the back.The main reason I bought this holster was that it was swappable to left-handed. I have a hard time finding left-handed stuff, but it looks like this holster will serve that purpose well. There are a few "extras" on the holster, though, that, while I did not order because of these features, seem a little lacking.First, the "gimmick" for this tool... the magnetic base to hold screws and bits. This magnet is very weak. Almost like a refrigerator magnet. I wouldn't trust anything to stay stuck to the magnet for more than a few seconds, and only if I'm not moving around. If I find the placement of the magnet handy, I may cut open the magnet pouch and replace it with a small neodymium magnet.The second seemingly useless feature are the elastic bit "pockets"sewn into the sides. These are only about 1/2 deep, with the bottom sewn closed. As with the magnet, I wouldn't trust them to hold anything for more than a few seconds as I swap out a bit, though my teeth do a pretty good job of that, already.Bottom line... It seems to be a decent left- (or right-)handed drill holster with a reliable closure strap, but don't buy it for the magnet or bit pockets.

Great for left side. If you use two drill holsters, this is a great solution. It also has a small pocket under the magnet that you can put screws in, and they won't fall out. I removed the hold down strap and buckle, which just in the way. You can cut the buckle off from underneath with a utility knife. It will will hold both large and small drills, although i use it for my dewalt 12v drills mostly.

Very sturdy. All of my Ridgid tools (drill, 1/2 in. stubby and 1/4 in. impact) fit with a 2Ah battery. A 4Ah or above is just too much weight outside of the holster. It needs to be angled, instead it is completely horizontal. You definitely need to use the strap if you are walking or climbing. The pocket is useful for hanging a measuring tape or something small with a clip, nothing else. The magnet is not strong enough to hold anything that is not very small, very flat and very smooth. My Ridgid 1/2 in. high torque impact wrench does not fit.

Perfect i use it everyday all day and at times i have just throwed it among all my tools and it still looks new and holds up great