PLA 3D Printer Filament, Black, 1KG

I’ve been using this SUNLU PLA filament on my 3D printer and overall it’s been very consistent and reliable. The spool came neatly wound, and importantly, I haven’t run into any tangles at all during use. That alone makes it less stressful than some cheaper filaments where you’re constantly watching for feed issues. Print quality has been solid across multiple prints. Layer adhesion has been dependable on standard PLA settings, and I didn’t need to make many slicer adjustments compared to other brands I’ve used. It just works without much tuning, which is nice for everyday printing. The black color is deep and consistent throughout prints, with no noticeable fading or patchiness. Surface finish comes out clean as long as your settings are dialed in properly.

This has been a great experience so far. I’ve been running Sunlu Black PLA on my Bambu Lab P2S with the AMS2 Pro, and it feeds flawlessly through the AMS without any issues. The spool arrived tightly vacuum sealed, and through the first half of the roll I haven’t encountered a single tangle. Print performance has been equally solid. Bed adhesion is excellent on both a smooth PEO plate and a textured PEI plate—no lifting or inconsistencies. Layer adhesion is strong, and the finished prints have a clean, consistent surface with a really nice overall finish. I’ve be included a time-lapse and a couple of photos of a paper towel holder I printed with this filament. It turned out exactly how I hoped—clean lines, solid structure, and a great final appearance. I haven’t finished the full spool yet, but based on the first half, this is a very dependable PLA that performs exactly as expected. If consistency, ease of use, and solid print quality matter to you, this is an easy recommendation. I’d absolutely buy this again.

It's an amazing choice for the average person in 3D-Printing. It's a great deal for what you get. As of my purchase, the price was $13-14 (not including tax/shipping). Compare this to the average of $15-20+ for other brands, especially printer manufacturers. Of course, it isn't perfect. The best way to describe it is kind of a "general" product in every category. It has decent quality, decently durability, decent flexibility, and overall is decent or pretty good in every category. You pay a basic price for a basic product, and that's not a bad thing at all. The thickness makes it ideal and compatible with most standardized printers from companies like Bambu Lab or Creality. It's very reliable and so far, and hasn't caused any problems, and I'm able to achieve any print speed I desire. It looks great when everything is finished as well, with consistent coloring throughout. I can't say for certain, but so far it appears to have decent moisture-resistance, being very forgiving if you can't store it in a dedicated or controlled environment. I don't have anything particularly negative to say about it, so I give it 5 stars for being a great product overall. I'm personally using a Bambu Lab printer with this filament, so I can say for sure that if you have a Bambu Lab printer then this filament is 100% compatible and an excellent choice if you don't want premium filament. I also like the fact that the spool holder is standard form, and also reusable.

Prints really nice compared to budget filament. Super clean finish, spool is tangle-free and is re-useable which is a big plus! I can finally do refills now thanks to SunLu. Color is great and flows like every other filament.

Bang for the buck it works great. I use it for my test models and it does just what I need. Maybe with some experimentation I could eliminate the only noticeable issue, that would be warping at the edges as it cools and lifts off the plate. Not horrible, but it does happen. Don't know if it's enclosure, plate or head temp that is needs tweaking, but I've never have any such issue on my CORE ONE+ using Joseph's genuine filaments. Bottom line, if I'm going to burn a bunch PLA mocking up a prototype this does the job. I give it a solid 4 out of 5 stars. Now that I'm looking at the picture I'm posting I also see some signs of stringing, very minimal though. Then some layer imperfections all at locations where internal features begin and end. They all have to do with my printers settings, I'm sure they could be worked out if I had the time or a Filament Profile. I just checked and PrusaSlicer, they have 3 Sunlu profiles(PETG, PLA & PLA+ 2.0). I'll take a look at the profile and see what settings have been modified. Hunch is that it will fix all my problems with this product. If it does, I'll come back and give it 5 stars. Happy Printing!

Has yet to tangle or get jammed which I am impressed with because that has been a pain for other filaments. It has been frustrating to print sometimes but I am giving it five stars because all the issues I have experience may very well be a Bambu issue, not necessarily a filament issue. The filament does not stick very well to my base plate on the most default settings but I have had to make some tweaks the settings to get it to print consistently. My Settings tweaks: Does not stick to print bed when labeled as generic PLA (perhaps a bambu issue, not a Sunlu issue), prints better when I labeled it as a Bambu PLA?? Sometimes it will print straight to the base plate but other times I have needed a raft or brim, so may require some experimentation

A lot of black filament prints closer to dark grey. This one is actually dark - a true black that stays black on the finished part, which matters when you're not painting afterward. It printed well for me and the price is hard to argue with. Easy repeat buy.

3.5 stars if I could. Great budget friendly spools. Only issue is in my experience it takes more playing with the settings to get SUNlu dialed in. Have had better luck and easier time with slightly more expensive options. But if you on a budget and are trying to sell anything or have perfect prints. this works perfectly. The print speed needs to be slowed slightly, but the color and temperatures prints great. Normal spool size.

I recommended with my all heart I would like to thank The seller for that product Great shape great color , work perfectly and 200C No bubble , It is a perfect choice

خمس مرات ينكسر علي الفلمنت وقت الطباعة وينحشر في المجرى الشركة كويسة بس واضح ان التخزين سئ جداجدا

It breaks every time between print to print and sometimes mid print I'm not buying this fillement again

Al principio costó encontrar las temperaturas idóneas para una buena impresión, pero una vez resuelto, la calidad de las impresiones son muy buenas.

جودة الطباعة جيدة لايوجد فيها مشاكل ولكن لا يكاد يمر علي قطعة أطبعها إلا وينقطع الفلمنت في منتصفها أي حركة صغيرة ينقطع وأكون قد تركت المنزل وتركت الطابعة تكمل عملها لأعود وأرى أن الطابعة متوقفة بسبب انقطاع الفلمنت ولا أوصي باللون الأسود إلا للحاجة له لأنه يخفي جمال التفاصيل بالنسبة للبائع فهو بائع جيد والبضاعة وصلت بأقل من أسبوع