airgooNEON RGB LED Strip for PC, 15.75 x 0.55 x 0.28 inches diffused Silicon Rubber Tube, for 12V 4-pin RGB Header, Come with Magnetic Brackets, Easy to Install

I was going to pick up some typical light strips for this budget build until I saw these for just a few bucks more. I'm glad I picked them up, they look great. I have them hooked into an Asrock B450M Pro motherboard which thank goodness has 3 LCD connections (two 12V and one 5V). The same software that runs the AMD Wraith fan lights also controls the LED strips, or you can use the Mobo RGB controls...or G.Skills.Cons: It's pretty thick and tall for a light strip and stiff making it challenging to keep straight. That leads me to the second point, since I don't want to use any sticky stuff inside the case, a few extra magnetic connectors would be nice. But at this price point, it's workable. I would definitely buy them again for simple bends, anything else requiring more complexity I would try to find something more pliable.I definitely recommend these over standard light strips.

Great product overall, easy to install. The only issue is part of the light strip i received lights up as a different color than the rest of the strips. If not for that it would be 5 stars.Update: they replaced my defective light strip, works great now. Great product and even better than expected. Excellent customer service!

I was pleasantly surprised at how simple the install was for these lights. I was worried I'd have to use double-stick tape an make semi-permanent fixtures (included in the package for non-magnet situations). Instead, the pack came with magnetic tracks (see picture) that let me just place the bars where I wanted them just outside the panel window. It was all tucked away and glowing in about 10 minutes (using MSI Mystic Light for my mobo). Well done, Airgoo!

I had other RGB things in my case, but everything that was illuminated was located above the (huge) video card and everything below was in shadow. I wanted to add some extra illumination to the lower half of my case. I had two difficulties with these lights, neither of which is entirely their fault. First, while I planned to plug them into the RGB controller that came with my water cooling pump, it turns out that it's a different connector that doesn't connect with these plugs. Fortunately, I also have an RGB connector on my motherboard that I hadn't previously been using. It took some trial and error to figure out the included cables (instructions would have been nice), but probably wouldn't have been a challenge if I had used the motherboard's RGB connector previously.Second, these are BRIGHT. Way too bright, in my opinion; it hurt to look at them in the case. I tried turning them down in the motherboard's RGB settings with limited success; only some patterns actually responded to the Brightness setting. I think that's more likely to be a limitation of the motherboard than of the lights, but I'm not certain. At any rate, I wound up remounting them in different positions -- one facing away from the window so that only a small edge of the illuminated side is visible, and the other in a back corner of the case so that it's entirely occluded from the window. The result is that they illuminate the case with their bright light, but it isn't directed out so they don't blind people.That said, the color quality seems excellent, and they illuminate as a solid strip of light rather than having obvious colored dots like some RGB strips are. If you're looking for a good value on REALLY bright RGB lights, pick these.

The media could not be loaded. This product blows me away the sheer brightness of the light are insanely good for the price. It was easy to install. The only hard time I had was not know where to place them so I kept on changing it around until I was satisfied. I bought four of them one set is a 4 pin and the other are 3 pins but perform the same. I will update this post on the durability and longevity of the strips. Would highly recommend if these if you are on a budget. I also was in contact with their support team and they were wonderful in helping resolve an issue I had that shouldn’t be a problem for many people.

This synced with aura sync and by extension iCUE was able to control it. I have it set to white and I can vouch for this product and say that they are VERY bright when set to max brightness. It's ablebto handle the breathing effects flawlessly and was super simple and easy to install. I recommended it to my friend and he loves them. His is set to red and the light is able to overcome the tinted side panel and lights up the interior perfectly. I'll include a picture of my system for reference. I hope people find it helpful. I whole heartedly recommend this product!

Mine has some very small inconsistencies in the leds, some are very slightly more pink than the others. It's such a small difference that a phone camera won't pick up and is only noticeable when set to white. The main issue for me is that the strip lets out a really bad coil whine if more than 2 strips are daisy chained.Given how thick they are, I expected it to diffuse a bit better too, but it looks really good nonetheless and much better than a tradition led strip. Overall, it's ok given its price, and I like airgoo products for their prices, but keep in mind that their quality won't be top notch

Nice rgb strips much better than the cheap ones, syncs up with Asus Aura Sync app perfectly!! I had to plug them into my graphics card rgb output(mb doesn’t have rgb header) so Aura Sync’s Armor Crate doesn’t recognize them like my ram and gpu, so they just follow my gpu’s lead. Not as bright as some but lights are defused so it’s dimmer but much more even. I think 3-4 strips is the perfect number considering that. Im going to order another kit to even things out recommend if ur trying to get on that rgb gang it improves FPS undoubtedly lol.