Tempered Glass Screen Protector for New iPod Touch (7th / 6th / 5th Gen, 2015 / 2019 Released), 2 Pack

Very easy to install. I feel like a pro lol. Love the privacy screen protector. It sure dark for other people, they can’t see my phone til I face it to them. Love how it is so easy to install the screen protector. No bubbles. I bought one for my ipad as well. Will definitely buy OMOTON brand again.

This OMOTON 2.5D Round Edge 9H Tempered Glass Anti-Scratch Screen Protector for iPhone SE - Clear is the BEST! . . .or "Better Than You Want" as their slogan states (Not sure about that line???). And I have never experienced better customer support, particularly for a product in this price range. When I received the product there was some serious damage clearly visible on the outer box. I contacted Omotion via email and from the first response, from Amy (the service rep), through to getting a replacement in the mail, she could not have been nicer or more efficient. I could not have been happier with what seemed to be their true concern for me as their customer. I have waited over two months to post this review for a couple of reasons. First of all, I felt a bit intimidated by the instructions that came with the product and the YouTube installation video. This is my first smart phone (Apple iPhone SE) and I wanted it to remain perfect and well protected, but I was very worried I would screw it up when installing this protector given the VERY thorough installation instructions. I quite literally sat on it about two weeks before even attempting. Secondly, I also waited a while post-installation to review it to see how the product performed in the real world. It is very clear that Omotion put a lot of care into the protector (and you get two!), the packaging (a very cool little masonite box), cleaning materials (swabs, lens cloth, sticky label to pick up lint), guide stickers (to get it in place before adhering) and installation help guides (aforementioned booklet and video). There is a lot of competition out there but this attention to detail sets Omotion apart. After I sucked up the courage to proceed, all went very well. Admittedly I did find it a little tough to get the glass perfectly aligned (and I mean PERFECTLY); that took the most time. I am a bit of a perfectionist plus this was my first beautiful rose gold iPhone, a double whammy to my anxiety. The fit to the SE was like a glove. I do wish there was maybe a little wiggle room in the holes for the Home button and the microphone so alignment was a bit easier, but that is being very picky. I managed to keep it nearly free of lint (just one tiny piece that is barely visible remains). It is something else to behold how quickly this thing adheres once you let go too. No turning back once you do though. I had one little hitch which was TOTALLY my fault. Omotion provides a "dust-absorber" which is provided as a peel-off label. It worked phenomenal to remove all dust from my iPhone screen before installing the protector, so I thought I would use it later to clean the lint off the clear back panel of a plastic case I had purchased-----DON'T TRY THIS AT HOME! The "dust-absorber" stuck to the plastic case like a son-of-a-gun (PG version). In hindsight, it clearly must be made to take lint off glass, not plastic. When I finally managed to peel the "dust-absorber" sticker off the plastic case, it left a sticky residue that I had to remove with a solvent. All of which left some serious dust and lint on the clear backside of the case making the task of completing the entire project that much more tedious. WHOOPS! Since installing this protector the second week of March, I have dropped my phone once. And that was the day after I put this protector on. Granted it was also in the case that I purchased, but it landed first on a corner than did a face plant (Omotion screen protector down) on the kitchen floor. AARRGGHHH! I picked it up and not a crack, scratch or ding of any kind. I haven't had any more fumble finger episodes as I learned my lesson on that, but I don't yet see a single scratch on the protector from everyday use either. I highly recommend this Omotion screen protector and hope this review is helpful to you.

Really great value! Bought this glass screen protector for my wife's iPhone SE (which she traded in her humongous Note 7 for, go figure). Packaging was nice, some kind of light particle board with foam inside, and each of the 2 glass screen protectors (that's right, it comes with 2 in case you screw up with 1, or just to save for the inevitable time when the first one cracks from dropping it) come in individual plastic sleeves, which are then wrapped in thin foam sleeves. Instructions were straightforward, and all the usual installation tools are included: 2 wet wipes, 2 sets of stickers (more on this later), "microfiber" cloth (it's never really true microfiber), and a mini squeegee card. So about those stickers, which includes these cool "guide" stickers, which act as a hinge for setting up the final install. Just pre-align the screen protector onto the phone, making sure to line up the pre-cut holes for the home button and speaker. Use 2 or 3 of the hinge guide stickers to attach the screen to the left or right side (see pics). After cleaning and dusting phone screen, remove the sticker side of the screen protector, and match back up using the stickers as a hinge, which should guide it to the correct alignment back onto the phone screen. And the "after" shots of the screen protector should speak for themselves. Amazingly, the screen seems just as responsive with the glass, and your finger seems to glide over it even more smoothly than with just the stock screen. Also, it fits perfectly with a clear slim case on the phone. SUMMARY Pros: - Inexpensive - Easy installation - Great quality, precise cutouts - Responsive touch feedback, and "easyglide" feel Cons: - No processors? .... none, really, but just had to list something there, right? One note is that there is no cutout for the front-facing camera, but it does not seem to affect picture quality whatsoever in my limited testing. I would definitely buy this again, if needed. Also, I paid full price because I'm never lucky enough to receive "promotional samples" from any of these guys. Hope you like my pics, shot with my Galaxy S7 Edge. :)

First impression is that I wanted to give 3 stars… the screen application device gave me issues and it was because the holes on the screen that holds to the application device were not the same sizes. Long story short, it could not grip the film so as I pulled (first step in the process), everything would come apart. This was really frustrating as one of the two films is useless in the application tool. I was able to get the second one installed and it did got a lot better than the first. First impression is that the screen is good quality. I was able to get it installed with no air bubbles and the privacy factor is really good. It does not glare as much as a previous protector that I had. I think I had I gotten the chance to use both protectors, it would have been a good value for the money.

If you are like me, then you will want absolutely no imperfections on a screen protector, and you will want it to feel great. Here are some installation tips: 1. Setting: It is *extremely crucial* that these screen covers are installed in an environment as close to dust-and-lint-free as possible. This means: totally lint and dust-free surfaces, no lint in the air (if need be, find an office or take it to a store somewhere), no flaking cotton shirt lint (!), because if you put the screen protector on and you trap even one lint between it and the screen, you will see it there and you might not know it's there until after you put it on. 2. Lighting: It is also *extremely crucial* that you have tons of light sources (e.g., a bright office) in the room, so that you can see any possible specs of lint or whatever, on the screen, during and between every step of the installation process. 3: Practice: This is a small-enough device that you can practice yourself with a few screen protectors, and at low cost. I also have an iPad but for that I had a separate screen protector installed in-store, since the surface is so much larger that the probability of even one lint landing in the way is higher. For a pocket-sized phone screen, you can do this yourself. 4: Scotch tape (optional): You may (rather, WILL) find after even super-careful application that a tiny spec of lint may still appear along an edge underneath the screen protector. There is a trick using Scotch tape to getting it out. More on this later. The package oddly enough came with two sets of directions, and they were not the same. The basic premise between the two sets, however, was: use the supplied wet-dry wipes, and the supplied microfiber towel, and then apply the protector. These first steps clear residue off the screen. (Note: If your screen is already scratched from prior use, these will not fix it. These are just for preparing the protector.) The details of the "How to do it right" could be made even more clear, and I find this to be a common issue with screen protectors. The directions also do not say what to do with the other (perhaps helpful) objects that are in the kit, such as the dust sticker. Follow the directions up until it tells you to apply the screen protector itself. Grab it only from the sides. There will be a sticker with an arrow, where it will tell you to peel off the sheet that protects the sticky side. Once you are convinced that the dust/lint/whatever will not get in the way, apply. Other than the potential for lint to get trapped, the actual application is not so bad - feel free to readjust the angle of the protector (but try to get it right the first time); also you may massage the screen protector if it does not lay flat after you apply it. If you see any pixel-sized dots after application, these could be either due to lint, in which case see below, or the adhesive, in which case don't worry as this goes away after a few days. Note: The protector will appear to show pressure marks where the sticker was, on the upper left corner of your iPod. I have found that after 3 days, this fades away. Do not worry. You should be more concerned about specs of lint. Now, if you have already applied the screen protector and, after a few minutes, hours, days of careful eyeballing, you notice that one little spec of lint/whatever got trapped along an edge, there is a remedy. You can (gently) lift the screen protector, with a fingernail, starting from the corner, until you get just enough space to slide a strip of Scotch tape (sticky side facing the adhesive of the screen protector) to where you saw the lint. With one hand, place the tape there, and with the other, bring the screen protector back to about halfway... then pull the tape out of the side of the screen protector, and the lint might just come along with it and will not ruin it. Note: If you lift the screen protector, then keep in mind that you run the risk of trapping more/new lint, so again, find a lint-free environment and excellent lighting conditions. The feel of the screen protector is very nice. It is thin and feels scratch resistant. The full quality and color of the retina display just passes right through. (Some other screen protectors can cause color speckle patterns... which is severely distracting from viewing your own photos on your own iPod Touch.) But this screen protector will still smudges just as noticeably as the iPod touch surface itself. But you get to keep the microfiber cloth, and you can use it on the screen protector without scratching it. I recommend getting some kind of carrying case to go with your iPod touch (try them in electronic departments of local stores), and put the microfiber cloth in the case with your iPod touch. And if all else fails, this is a 2-pack, so you can remove the first (if failed) screen protector and try it all over again.

Background: I work in tech. I have had an iPhone Air since launch and have been using it without a case or protector for 3+ months before picking up these screen protectors primarily for the privacy function. My phone does not have any scratches or blemishes on the actual screen of the device in 3+ months of using it without a screen protector. I went through both of the screens that come in this pack in a week of having them. They shatter much more easily than your phone screen would, leaving you with a cracked protector needing replacing even when the impact/drop would not have harmed the phone if the protector was not there. All these serve to do is to shatter and require replacing. The gorilla glass that comes standard on phones are significantly stronger than these screen protectors are. Don't waste your money on these. If you are looking for privacy protection, get a sticker based privacy screen.

Privacy screen protection is the actual tempered glass and not like the weird plastic style ones. Very good instructions and that it comes with two is awesome in case install goes wrong or it breaks down the road. Super easy to install.

What I can say is With the applicator to help put on the protector, a 5 year old can do it. The privacy is great at about 30 degrees of angle the screen becomes blank. Now for the best part; I was riding my e-bike at 30mph and my iPhone 17pro max went for a drop/slide/skid. Yes the protector cracked and shattered; but my screen was safe and untouched. I highly recommended this protector.