OEMTOOLS25025 26 Blade Master Feeler Gauge

Exactly what I needed for setting up my guitars. Good construction and very easy to use.Pros:Gets the job done, and the numbering is very big and easy to read on each feeler.Nice to have the little knob on it to tighten when you want to close it and keep it closed. Then you can simply loosen it to find the feeler that you need, then lock it back in place with a turn to use it.Solid all metal construction, seems to be something that will last, my only concern would be if the numbers ever faded. But they are in order, so if you have most of the numbers, you could figure out what's in between.Cons:As other viewers have said, there is some oil on each of the blades, which might be necessary. I don't think this thing is made of stainless steel, so a little lubrication is not a crazy idea here, but still, it will get on your hands when you use it.Conclusion:This is a great tool for setting up your guitar or whatever else you need. It has a lot of different-sized feelers and basically every increment from end to end is filled in and accounted for. I highly recommend this product, especially for the price.

They did exactly what they were supposed to do.

Used these for a valve adjustment and the bent gauges made the job a breeze. Overall good value for the money.

I bought these to help with diy guitar setups, and it looks like they’ll do the trick. Let me be honest though, I have never used feeler gauges before, so I really don’t know what a high quality feeler gauge set is like.Pros:-This set has everything I could possibly need, and then some.-Numbers are etched into the gauges-Measurements seem to be spot on. I measured many of the gauges with the Mitutoyo caliper I bought with my order, and they measured what they were supposed to. I can’t really comment on the thinnest ones, as they were too thin for my caliper to measure (it’s accurate to 0.05 millimeters), but I most likely won’t need them.-The holder and blades are held together by a nut and bolt, so they can be rearranged as needed. This could be bad as well though, as I list below.Cons:-The blades have some oil between them. Not a lot, but it’s worth mentioning. I ended up wiping it off enough to not get it on the guitar I was checking a measurement on while trying to separate the blades though. I did take a star off for that-The blades stick together due to the oil. Be careful with the thinnest ones, I almost bent them trying to separate them.-I could see the nut that holds these together possibly coming loose if they’re used a lot, and gauges going everywhere.

High quality tool perfect for setting up your valve lash clearance. Remember to rotate the crankshaft to the point where both valves are close on the cylinder that you are working on.. Adjust the clearance then move to the next cylinder. Rotate the crankshaft again to close the valves

High Quailty and the slight angle was absolutely necessary for adjusting my valves.

I used these to double check the clearance of the nozzle of one of my FDM 3d printers. Great way to accurately measure that.

I've played guitar for several years now, and only in the past few months have I begun seriously working on guitar setup/repairs as a luthier. The one glaring problem I had as a budding enthusiast was that my tools weren't up to snuff (what average workbench setup has gauges designed to measure in thousandths?) After cringing at prices from LuthierSupply, StewMac, and the like, I stumbled onto this feeler gauge in my Amazon recommendations (thank you once again for reading my mind...though it is getting a bit creepy...)For under $5, it seemed like a safe bet to take a chance on, and I snapped one up immediately. Upon opening, the first thing I noticed was..oil. Be warned: The blades come packaged with some form of lubricant between them that I doubt most would want to spread on other surfaces (like the fretboard of your guitar for example). After wiping much of the excess off, I examined the actual tool:The blades themselves are very well made, easy to read, and are perfect for measuring everything from variances in fret heights (those that are impossible to gauge by eye) to pickup and string height (in order to setup action and neck relief). For those measurements exceeding 0.025"/0.635mm it's a simple matter to add adjacent blades in combination up to a total of 0.328"/8.332mm. This is made possible due to the fact that the first blade on the wheel is actually the .025"/.635mm, allowing gauges to be added progressively from the smallest value up. Perhaps this is obvious, but I did not see it mentioned in the item description, and it does increase its overall usefulness.Furthermore, the protective metal sleeve can be removed to separate the gauges for individual use by removing the thumb screw at the top (though I personally have yet to see the need to do so). And don't worry, I've yet to see any indication that the screw can fall off on its own and scatter tiny impossible-to-pick-off-the-floor-by-hand gauges everywhere.All in all, a great little tool that I suspect will serve me well for many years to come.

Qualité Bonn

Excellent tool, comes coated in a stinky lubricant presumably to prevent rust?

Me gustó su funcionalidad lo uso en mi taller de lauderia para calibrar las alturas de las cuerdas en las guitarras para que su acción sea cómoda y baja

Excelente ptoducto gran calidad precio muy bueno

Works really well if you’re doing valve adjustments on cars where you’re laying on the engine bay