Quick Chill Double(Twin) Copper Immersion Coil

I was REALLY hesitant on getting this because of how much water I thought I'd be wasting compared to my old thinner chiller coil that I used for 5 gallon batches. This, shockingly cools my new 20 gallon batches in the same time that my 5 gallon batches were cooled. In the summer months of Chicago, I go from boiling to 80F in about 20 minutes. About half way through I lower the water pressure/speed and move the chiller coil in my wort and I can sometimes shave 5 minutes off of that even. I spent a good deal of time doing research on this vs counter flow chiller coils and chiller plates. I went with this because I feared infection from cleaning issues. Plus if you clean things correctly every time, you're probably spending an extra 30 minutes each time you brew doing that. Proper cleanup of this takes 5 minutes or less and sterilizes in the next batch/boil.I did end up coupling this with a 1/3hp motor that I throw in the nearby lake with a 100ft hose. No water waste there. If you don't have a nearby lake and you're concerned consider a rain catcher of which you could also put a cheap $50 pump in. The one I use is https://www.amazon.com/Superior-Pump-91330-Thermoplastic-Submersible/dp/B000X07GQS

Good size for cooling wort quickly. I actually team this chiller up with a second smaller one I had on hand that I place in a cooler filled with ice water. Chills my hot wort more quickly. I do wish the supplier would terminate the copper coil ends with a fitting. I had to take the trouble to go get the parts to do that.

Awesome, Awesome, Awesome. I can cool 6 gallons of wort from boil to 68 F. in under 15 minutes, and 45 gallons from 155 F. to 80 F. in under 40 minutes (well water at 55 F.). The 3/8 inch, 20 foot coil from my local brew shop is $79.00, and takes A WHOLE lot longer to cool. This costs almost the same as buying the copper from a Dept. store and doing it yourself without the time investment.

I have purchased many items on Amazon, but I can say up until now, this is hands down the best product i have purchased. It is high grade copper (thick and heavy) and it cooled my wort extremely fast. I live in California and our tap water is not all that cold but it still cooled the wort to 70 degrees in a little over ten minutes. Very impressed and it came fast too.

Good quality chiller. Performs exactly as I expected it. Has reduced my wort cooling time by 50%. Would definitely recommend.

Wondered why this item weighed less and was less expensive than the competition.That's because it's not true 1/2 " pipe. It's really 3/8" pipe. Oh well there's one born every minute.

Works fine for what it is. Arrived and has no fitting for attaching tube to it. Also it is advertied as a 1/2 " diameter coil it is not 1/2" inside diameter as I was expecting but 1/2 outer and 3/8" inside diameter.

Best immersion chiller I've ever had. Used my old chiller as pre-chiller in bucket of ice. Dropped from 200 degrees to 65 degrees in twenty minutes.