E6000 Clear 1.9 Fl Oz Plus Multipurpose Adhesive-1.9oz

I have a Culligan Water purifier system. Works great. The plastic on it is very slippery. So slippery that anything I put on. It comes right off. Glue runs off like it’s water. Masking tape doesn’t stand a chance. I may will be putting a piece of paper up against it. Hot glue will dry in a long stream and then you can break it off like an icicle. I have even made sure that the area I am trying to glue is perfectly dry, and then I rip it up with the sandpaper to get something not so smooth surfaces because the roughness is supposed to help. But not here. I think this must be the proper test material that glue companies should use as a base. I purchased a hot glue gun. It has come in very handy, but it is worthless here. I have used double-sided tape. Epoxy tape. I tried JB Weld. Frog glue. Gorilla glue. The whole zoo! So then I finally heard of E 6000. OK let’s give it a shot. In order to hold the pieces onto the main tank so they will secure, I had to wrap masking tape around the cylinder and tape it to itself so that nothing would fall down past that point, and then in order to hold that masking tape up, I had to put masking tape up at across the top like little suspenders for it. The thing looked like it had been in a car accident. I left it for 72 hours. Came back this morning and went to see how everything worked. Took all the tape off and it is staying put for sure. Finally, found something that does when it says it would. The video shows you the extent that I had to go to in order to hold everything in place just because the surface of the cylinders was so slippery. I think the results are worth it. Although I wish somebody told me at the start that this is what I should have been using. I only bought a little tube, but I think I will be using this product for the rest of my life.

Works really well and dries clear. It has a strong hold and was easy to use for my project. Very happy with it.

I've been using that b700 glue that comes with rhinestone kits and it's terrible it's smelly and stringy. I learned that this is the better option and it definitely is! No smell no stringy glue residue and so much easier to work with. I wish it came with a precision applicator

I have NEVER had super glue work on anything I have ever used it on. Any type of super glue has never held anything made of anything, actually work, except on your fingers. So, I bought this E6000 for household fixes, mostly outdoors for putting up signs, exterior decor, ect. I needed to use it on a torn section of my purse. I didn't have much faith but, Wow! It worked perfectly, and you can not even tell it was ever damaged. The torn away section of the purse is completely fixed and strong as the other side. I will never be without this around the house. Best glue on the market.

superior hold but after 2 uses, it's stuck in the tabe canal. I am not really sure about what to do about it and because of this, I can't use it.

I will say it’s nice to work with E6000 that has no smell whatsoever, but the tradeoff is the performance. It takes forever to dry, so everything you use it on has to be completely flat and level or it will slide off, unless you have a way to secure the two pieces for a long time. This rules out anything on a 3D surface, and even for something like rhinestone painting, it would be really easy to bump and move previous rhinestones while applying the next ones unless you wait 20 minutes between every single piece. Not super practical for anything that involves more than a single simple adhesion. It’s also pretty limited in what it will stick to. You can peel dried glue right off of flatback rhinestones and other plastic and frosted glass surfaces more than 24 hours after application. It just feels like rubbery silicone, and you can kind of scrape and roll it right off. It also dries in the “needle” of glue application syringes (even when using caps), so it clogs every time it sits for a few minutes. It did work really well on some plastics when partially imbedding rhinestones in a puddle of glue. It was also great for rhinestones on paper. It honestly seems like it would make a better caulk, as it fills holes really well and stays completely clear. Overall, only deducting one star because when it works, it works really well, it’s just limited in scope compared to the original.

I used this to attach a broken antenna on a rental car. The antenna was broken when we got it, hanging on by a thread of plastic. I was able to glue it using this glue, and the antenna stayed intact. Surviving 90 MPH on I-75. I returned the car better than how I received ! I have used this glue for repairing statues as well and broken plastic or ceramic pots. It really never ceases to amaze me how well it works.

If I could give this glue 6 stars, I would. This is not just glue; it’s a structural bonding agent and a crafting miracle worker rolled into 1. I’ve used countless adhesives over the years for crafting, household repairs, shoe fixes, and intricate jewelry making, and nonthing—absolutely nothing—compares to the sheer, unyielding strength of this glue. It provides an industrial-strength bond that remains flexible once cured, which is key for items that move or vibrate (like cell phone cases, shoe soles, or outdoor décor). While you need to be patient with the 24-72 hour full cure time, the initial hold is solid, and the result is a connection that is waterproof and virtually permanent. The clear formula dries invisible, making it perfect for transparent materials or detailed work where aesthetics matter. If you are tired of adhesives failing, spend the few extra dollars on this tube—you will save yourself hours of frustration and future repairs. This is the ultimate essential for every serious DIY kit.

I've watched many, many online DIY videos and they all seem to use this E6000 glue. I finally decided to purchase a tube and I can see why it is so popular. It takes overnight hours to dry, but worth the wait.

FANTASTIC GLUE! Stronger than hot glue and more forgiving to work with!

Está pega es lo máximo, no se que no pueda pegar y lo mejor que luego de seco resiste agua.

Accidentally heat sliced a tent strap with an exhaust component of my diesel heater on my tent vestibule. I used this adhesive and let it dry with some weight on it for 24 hours. The bond is very strong and flexible

sole of my favourite sneaker detached and this product fixed it permanently. Applied a thin layer, pressed firmly and let it cure overnight. Now its waterproof, flexible and stronger than original glue. Works on leather, rubber and more no more throwing things away.