Battery for iPhone 6s 2200mAh High Capacity Battery for iPhone 6s with All Repair Kits Tools, plus 2* Adhesive Strips 1* Display Adhesive and Instructions (not 6/6P/6SP)

It was okay

I can't yet comment on how good the battery is as it requires several power cycles for the iPhone to get to know it, but so far it's working really well. I was impressed with the quality of the tools to help take the phone apart, the packaging and the instructions although printed small (so are the parts you need to move) were spot on. It's not a job for someone with aging eyes and it gave me a migraine but I managed to take the phone apart and put back together without too much swearing. Take your time pulling out all of the adhesive that sticks the battery to the case. I tried to lever the battery out before completing and that just doesn't work. Also be careful when re-attaching the ribbon cables. First time I did it one wasn't in properly but the iPhone to it's credit just popped up a warning and started anyway (was the screen touch censor). I will update if I have any issues with the battery but so far certainly better than the old one which wasn't holding charge at all. For the money absolute bargain to revitalise what is still a very good smartphone.

I bought a replacement iPhone6s battery to replace the original battery.I Replaced the original battery which is quite fiddly to do.When the iPhone was reassembled I tried to power up the phone but it was dead.Thinking that there may be a problem internally with some of the connections I opened up the phone again to check them.All the connections were ok & I reassembled the phone without the screen seal as this got damaged due to the fact I had to reopen the phone.To my frustration the phone would still not power up. As I had already checked the connections the only thing that it could be was the battery.I connected the phone charger and found the battery had no charge in it, ie it was fully discharged.To supply a replacement battery in this condition is criminal and caused me a lot of unnecessary work due to the fact that I couldn’t power the phone up on completion of the work.I would suggest that you source a different replacement lithium battery if you’re considering replacing the original battery on an iPhone.The battery did charge up and showed 100% capacity so was obviously ok.I can’t fathom why a lithium battery would be supplied in a fully discharged state bearing in mind that you need to check the operation of the phone on completion of the work.

Arrived the same day and came with all the tools to do the job. I have replaced several iPhone batteries over the years and this is by far the best kit for itFor iPhone 6S only. The connector is slightly different to iPhone 6 batteriesCharge seems to hold well, any issues I will update my review in the future (19/05/21)Top tip: If you snap the adhesive strips while trying to get old battery off, don’t worry - rub some Isopropyl Alcohol on an old card and carefully slide it under one side of the battery and wiggle it till the battery comes loose - this weakens the adhesive bond and prevents the risk of bending or piercing the old battery

I decided to have a go at replacing the battery on my iPhone as the last couple of times i’d had it done at a shop, I was less than satisfied with the battery life.On the last occasion, the battery lasted 3 months and had expanded so much it forced the case apart.I looked on eBay and read some reviews and went for this one., which is a higher amperage than both the original iPhone battery and the last replacement one I had.Fitting was straightforward, I heated the back of the phone up with a hairdryer to loosen the adhesive as whoever replaced it previously had used double sided tape. I levered the battery out with the back edge of a potato knife! Worked a treat!Battery life is excellent and still at 100% health. Would definitely recommend this battery.

Took a good chunk of time to install - I’d leave an hour to do it. At various points in the instructions it advises using a hairdryer or heat gun on the phone body, so that the adhesive used to seal the phone together will become pliable. However, this ended up with scorching some of the phone - though there does not seem to be an effect it’s use. The supplied adhesive was very hard to apply and does not seem to seal the phone together as well as it was previously. Battery is an improvement however and does seem to hold its charge.

4 Stars given as instruction pictures could have been clearer and it would have been good to know to ensure that the screws must not be mixed up before the instruction to remove them. The magnetised tools were good to a point, especially in removing the screws but a hinderance when trying to fit the smallest of them back in. All in all a good battery, fitted with the tools provided but the additional assistance of a you tube video was required.

Really good instructions, replaced my iPhone 6 battery. If you don’t have a heat gun, a hairdryer works just as good removing the strips behind the original battery (heat the back of the iPhone before taking the battery out or pulling the strips) makes the process easier. Good tip, make sure to put the screw aside in the same pattern as you took them out, as some are shorter than others.