ESEESheath Accessory Pouch - Compatible with Models 5/6 - Made in USA (Long, Olive Drab)

When I ordered this pouch, I saw a picture of it mounted on a Junglas 2 in someone else's review, so I assumed that the holes would line up with my sheath as well. They don't. The other person must have drilled holes in their sheath to mount it. I wasn't about to do that so after scratching my head a bit I came up with a solution I thought I'd share with you. The bottom two holes will match up with the second from the bottom set of holes on a Junglas 2 sheath. As you can see in the picture, what I then did was run paracord through the top two holes, through the set of holes above it on the sheath and tighten them with a spring loaded drawstring clasp to keep it secure. I'm happy with how firmly this holds the pouch. Problem solved.As for the pouch itself, It is very well made. The nylon is thick and very well stitched, the hardware is good quality and solid. The tin is just a tin, but looks very cool as well as being functional. I like the addition of elastic on the outside of the pouch letting you carry a couple of small items (flashlight for me) on the outside. The strap that the fastek buckle is fastened to adjusts to let the flap expand over these add-ons and velcros down to keep it out of the way. I appreciate this attention to detail. Is it worth $20? It is to me. It is well made and I'm happy to pay American workers for their efforts. So far, I carry a flashlight on the outside and a bunch of bandaids and triple antibiotic packets in the tin. Me + knife + bushcraft = lots of cuts and scrapes. EVERY knife I carry should have a first aid kit on it.

This pouch will fit an ESEE 4, with the molle back! The top two holes line up fine, and lower right hole will line up with a little maneuvering. Use the included paracord for the fourth. Put the lower molle back holes together with the sheath first. The lower molle back will be in the middle of the top and bottom pouch holes. Use the hardware fron the clip plate on the lower molle back holes, and the hardware from the pouch for the top and bottom. It will all go together. Seriously, if you can't figure it out, maybe this knives is not for you. Now the pouch itself is small. Quality construction, but small. I suggest one gets the long version, especially if you are putting this pouch in an ESEE 5 or ESEE 6. The standard version in 4.5" long, the LONG version is 6" and in my opinion works and looks better. The LONG and STANDARD versions have the exact same hole pattern and spacing, so a Long Pouch will work on an ESEE 4, 5, and 6. Happy Trails.

Perfect fit for esee 5 , and good fit for tin

I am using it on my Cold Steel SRK sheath, and it works great. I am carrying a small multi tool, a few band aids, ferro rod and a fire starter. Looks great and performs like I expected. Highly recommend paying the extra money for ESEE quality, even on a non-ESEE knife.

Great quality pouch that's made in America, Similar in quality to something you would get from Maxpedition, Good size for a sheath pouch, comes with a ESEE branded tin about the size of an Altoids tin which takes up the entire inside of the pouch so that's how much space you get (a hair extra if you skip the tin), On the outside there is two elastic straps that could hold say a small flash light or a Ferro Rod. Overall great product, Only complaint is given the size I feel the typical 20 - 30 dollar asking price is a lot, I feel 10 - 15 dollars would be a fair price but if that's no concern then this is the perfect pouch for a stock ESEE sheath, I have it hooked up to my Laser Strike seen pictured.

Quality product that comes with mounting hardware. It shipped out fast. I put the pouch on a Gerber StrongArm knife. Attached without problem. The large pouch is pretty big volume-wise. It balloons out some at the bottom. No drain-hole for water. Materials and quality-control very good. It is a bit expensive for what it is, but should last and be something you can depend on.

Great addition to my esee 6! fits an altiods tin and then some, i keep a ferro rod, lighter, DC-4, and multi tool inside for a one stop tool shop all on one knife. High quality an worth the price

It's a good pouch but the rivet holes for the molly back and esee 4 won't line up so you can't attach it to the outside of the sheath as I thought you could.

Es muy caro para lo que es pero pagas por el emblemas así que está bien

Mir wurde anscheinend eine falsche Tasche zugeschickt.Auf der Rückseite befinden sich lediglich Molleschlaufen, aber keine Löcher fürs verschrauben.Schrauben und die Metaldose fehlen ebenfalls, sowie scheint die Farbe ein steingrau-oliv zu sein.

La tasca in cordura contiene una scatola in metallo targata esse ed è un'accessorio fantastico da montare nella parte anteriore delFodero in kidex, ci sta benissimo !Non potrei essere più soddisfatto!

Super esse Qualität wie gewohnt.Passt perfekt und sieht super aus.Versand auch Problem los.

No doubt this is a quality piece, it looks like it could last a lifetime. Pretty cool tin to hold key pieces of survival equipment.