20 sqft Heating Mat System, 120V Electric Radiant Floor Heating System for Tile and Stone with Floor Sensing Thermostat Aube TH115-AF-120S. Heated Tile, Stone, Vinyl

Product description was true to form. Easy installation, I had a small area and it fit perfectly and heats the floor within a few minutes. Thermostat was surprisingly technical and allowed for daytime, vacation and other settings which allow you to control the heat. I put it over cement board and I mortared directly over it. It took a little longer to lay the tike as I needed to build up the mortar in the surrounding areas but overall the product works well.I did add an extra sensor just in case the current one goes for some reason. It's a cost of less than $7.00 so i would recommend buying it along withe the product.

We installed this radiant heat flooring in two of our bathrooms, one under marble, and the other under vinyl flooring.Provides wonderful warmth!And although we are so glad we installed this, no one is happier than my cat!

If you ever wanted floor heat this is the way to go. It was easy to install. I watched various videos to see the pitfalls and tips. The biggest fear and caution is to not cut the wire. I was appropriately paranoid about this. I ran several continuity checks. Then I had to worry that the tile guys laying thinset and tile over it didn't cut it. They were very careful. They even devised a plastic trowel to work the thinset. When they were done I ran one more continuity check and it was still OK. With that I hooked up the power and the thermostat and voila it worked. I got exactly what we wanted in our renovated bathroom, heated floors.

Update: after contacting the company they sent me a new thermostat as it hadn’t been two years since ordering. Adjusted review as they stand by their products.worked well for a year then all of a sudden the display quit working and there is no way to get it to come back on. Got a electrician out and it’s not a power issue. Complete waist of time and money. Now we have a heated floor we can’t use and an ugly thermostat on the wall that has no power. Do not buy.

super easy to install, wires are much more durable then the direction and Youtube says. the entire mat is sticky so it just sticks rights on the floor and doesn't move. Other brands are not sticky. must plan the thermostat location to be relative to the starting location of the mat. other then that its fool proof and a no-brainer. expect 2-3 times the length of time expectted to do project with no mat, this is to do planning the mat and being gentile with trowel and thinset.

tl;dr - mat cable labeled to be used with GCFI thermostat, the supplied thermostat is not GCFI compatible; will not pass most local inspectionsTL;DR kind of says it all. Instructions are great, the thermostat (no repurposed) is easy to program and super convenient. The thermal sensor to embed in the floor worked right out of the box which is not always the case. The *ONLY* problem is the thermostat provided is non-GCFI which has two issues for me:1 - the mat labels and documentation clearly state to be used only with a GCFI thermostat2 - to get a super priced item the seller is putting a incompatible thermostat with the mat and heating coilPositives:* the matt was 18" wide which kind of surprised me* narrower mat meant it was easilyl to cove my 15 square feet* the mat has a sticky (ish) backing that mostly works* sensor was plenty long (came with the thermostat)* plenty of cable to run to thermostatNegatives:* the thermostat is the wrong kind for the mat and cabling* the thermostat is not GCFI* the thermostat afaik will not pass most local building codeConclusion:Just don't purchase it. Unless you can piggy back the thermostat on a circuit that already has a GCFI breaker on it, then cool! Otherwise don't.NOTE: in my location the radiant floor heat needs to be on its own circuit and each thermostat needs on that circuit must have its own GCFI compliant thermostat. This is increasingly standard.So read the fine print, know our local codes. Me, I just can't recommend this product at all. Which sucks, as the matting was great, the heat coil rock solid, sensor worked out of the box, and the thermostat has been repurposed and it super easy and convenient to use. The parts just don't work (or should be boxed) together.

I added the 7sqft version. Under the tile of my bathroom while renovating. I'm glad we decided to go this route. Warm feet on the tile floor when entering and exiting the shower

I ordered this a few months ago. I just got around to installing it. I have been very much impressed by the quality of the product and the thermostat. The kit comes with everything you need for installation, except an electrical circuit. I'm impressed by the quality of the mat and the thermostat. This has definitely been a good purchase.