Dremel 4000-4/34 Variable Speed Rotary Tool Kit - 4 Attachments & 34 Accessories - Ideal for Cutting, Sanding, Engraving, Carving, and Polishing

GET THIS DREMEL (with Prime shipping) I damaged my 7 year-old Dremel and had to replace it. Over the course of 7 years, I used my Dremel every week to grind my dogs' nails. One dog has soft nails and the other's nails are dense. I got my puppy 7 years ago and got a second dog 5 years ago. I tried one of the grinders marketed for doing dog nails and those are crap. Over 7 years, I ground down 2 sets of pug toenails every week. I also used my Dremel to remove a section of baseboard for bookshelf installation. So I can't comment on many of the uses for a Dremel. When it was time to replace it, I looked for a version with a separate on/off switch from the speed knob. I also wanted one that was at least 30,000 RPM. That led to the Dremel 4000. I didn't need the case and really only needed one sanding accessory, but that's not an option. DON'T BUY THE UBANTE - While searching for the Dremel 4000, I noticed the cost started at $75, and that there was an UBANTE U300 with variable speed from 10,000 to 37,000 RPM. It had good reviews (4 1/2 stars and quite a few reviews). Since I use it for only one thing (dog nails), I thought it would be fine. It was not. The sanding head was either way too rough or way too smooth, and didn't even fit snugly on any of the shafts. When I ground the dogs' nails, the rotary tool slowed down and jerked when I touched their nails. It couldn't maintain its speed. It also ran very hot. My poor dogs, which are perfectly calm for nail trimmings kept jerking and trying to get away. After 2 uses, the entire casing began vibrating enough to make my hand go numb. I'm throwing this unit away. I'm not even going to insult someone by giving them this. I have no idea how this garbage got a 4-star rating. BUY WITH PRIME SHIPPING - I immediately ordered a Dremel 4000. There were 2 options - with Prime for $75, and Free shipping and one-week delivery for $45 from VMInnovations. I could wait a week to trim my dogs' nails. So I ordered the Dremel 4000 with free shipping. The order information told me that the item would arrive in 4-8 days. The same day that I ordered it, the seller indicated that the item was on its way to the carrier. Yay! I was hopeful that it would arrive in 4 days. On the 4th day, the tracking indicated that the item was on its way to the carrier. There was no change on the 8th day, but the order info told me the item would arrive that day! I didn't have a package when I got home from work and I checked the app. The information had not changed. At 8pm, I checked it again. This time, it told me that my package was late, and that if I didn't receive it by Saturday (day 13) that I should contact Amazon support. At that point, I ordered this Dremel 4000 for $75 with Prime Shipping. It arrived 2 1/2 days later (on day 11) and I still haven't received the VMInnovations order. As soon as I receive it, I'm returning it. ABOUT THIS DREMEL - As soon as I got this Prime order in a timely fashion, I opened it, set it up, and used it. It was a little tricky to figure out how to put on the sanding tip that I wanted. I understood how to put the metal tip in the shaft. I've used a drill before - You hold down the button and unscrew the metal piece to open the inside of the tip. Then you put the metal "bit" or whatever inside it, hold down the button and tighten the piece back. The wrench helped. What took me a few minutes was figuring out how to swap the rough grit sanding circle with the medium grit one. Basically, use the handle of the provided wrench as a screwdriver in the end of the sanding tip. There's a little screw there. When you loosen the screw, the sanding hoop piece gets loose. Swap them and tighten it. I then used it for my dogs' nails and was super-duper happy. It worked wonderfully. The nails were done quickly and with no nervous dogs. The Dremel ran smoothly and the air that blew the nail dust seemed better on this one. I also like the separate power/speed controls. It allows me to leave it on the same speed every time. USING THIS FOR DOG NAILS - I use a variable speed setting of 22 and the medium sanding tip. This works for both of my dogs: one with dense nails that grow slowly and the other has softer nalis that grow quickly. I sit on the sofa with my feet on a stool, and lay each dog (Pug) on their back with their head away from me. They've been doing it for years, and are perfectly calm. Plus I always give them a treat afterwards. If you're new to trimming dog nails, make sure you check YouTube or something to learn how to do it. Dremels are great because they don't leave the sharp edges like clippers, and if you do accidentally cut the nails too short, they don't bleed as long.

It's a good Dremel for delicate work. I've been using it for over a year and it hasn't been damaged. Good product, I recommend it.

What a demonic little devil of a machine. It has about 800 billion recorded means of being useful. From modding your computer case, to removing the grout in your bathroom, cutting things like steel bars, youll never find enough reasons to break this guy out. Used properly the dremel 4000 can save you alot of time and effort and come out with a masterfully completed task. Right off, notice I said used properly. If you want to deep dado 800ft of hard wood, go get yourself a router. This things about detail, control, and speed. Just like everyone else, I will tell you to let the tool do all the work, grinding it in with a bucket of elbow grease will just burn this thing out. Think small, think tedious, think time consuming, then think precise. For instance, if youre doing a small dado, try not to do it all at once, make several passes lowering the bit more each time and dont just try to grind it out in one shot. This tool works for you, not the other way around. With the many attachments and accessories, this thing can work out to be your best friend. Amazons price was the lowest I could find, and after doing some math I realized that buying the larger sets with more attachments would only save me $10-$15 overall, and not all of the accessories are ones I want. I went with the cheaper set, and will supplement as I go along depending on my needs. This thing has too many features and bonuses and uses to list, so I will stop trying. If you do alot of work around the house, have particular hobbies, or need a general purpose power tool for light uses, get this. The price here on amazon is very reasonable, you will not be disappointed. Comes in a nice case with 2 useful accessories and a few of the more important attachments. I highly reccomdend this product. Cons: None. Seriously, im not brown-nosing, so far its performed optimally for whatever particular need I had of it.

Je recommande! Seul petit bemol, je n'avais pas vu en fait que ce dremmel avait besoin d'un transfo. Satisfait cependant

LEARNING WHAT CAN BE DONE WITH THIS SET UP. WORKS FOR GOOD CUTTING MILD STEEL AND CLEANING UP RUST.

Muy buena calidad, funciona perfectamente y sin problema de empaquetado.

Great Little Tool. I purchased the 4000 6-50. However, when it arrived the accessory parts kit was obviously from another packaged kit, probably the 4000 3/30. I phoned Dremel customer support, talked to someone immediately, and within a week had the right accessory package complete, delivered right from Racine WI. Super fast service without a complaint. Next I was cutting large circles on 3/4" MDF. Broke 2 cutting tools number 561. Phoned Dremel and the rep said I should leave over 1/8 out of the chuck, beyond the flutes. Did so and haven't broken one since. Great support. I was worried about using such a small tool. My router is Porter Cable 690, the table saw carries a 12 inch blade and I've owned 2 Canadian Tire Mastercraft knock-off rotary tools before. I literally threw one across the shop floor. By comparison this little Dremel is fantastic. I bought it to do a one-off project, but have ended up using it for so many other things that I hadn't even considered before. Like putting the finishing touches on my lathe tools (lathe knives). I mostly cut nylon, 6061 T-6 aluminum and a light gauge stainless for my brackets and fittings. We do ultra-light aircraft and I am working on some aerial borne systems. I've even let out holes out of my large shop sanding disks with this thing. It will remove large quantities of material in tight places that would have taken a very long time to do by hand. I ordered the bits for stainless sheet but haven't tried them yet. Now the down side. Accessories like the circle guide are substandard. I had to side cut two 3/16" X 3/4" bolts to jam either side of the circle cutter point to keep it from moving along the track. I built another circle cutter because this one is faulty. I also ordered, and received a StewMac router base as I had read in another review that the Dremel router base was less than good. Also Dremel should have used a better quality electrical cable. This one can kink. I also ordered the right angle drill, for tight places but haven't used it yet. In short I like to consider myself doing professional quality work of a very high standard. I should have bought one of these things a long time ago. You have to learn to let the rpm's do the work and not torque into it. I use 2 together of the junky little thin fibre metal blades so as to save the more costly EZ blades for more import work. This combination can cut 3/16 304 stainless solid round bar where a pipe cutter will not work and material is saved as the kerf taken out is so thin. I have used other grinding stones to lightly debur the inside of aluminum tube prior to riveting. A good list of attachments with cutting profiles and speed ranges and knowledgeable support are not something you get with a poor quality company. Also, if you're doing very critical router work order a foot switch from Busy Bee or somebody. The On/Off trigger switch takes your hand away from supporting the body properly on start-up and the torque can mar the stock. I ordered a lot of additional cuttings tools at the same time as I bought the 4000. Dremel sent me price a price list from Racine and in future I'll order direct. The cutting bits are high quality. Bit changes are fast. Sorry this is so long. I was really impressed. This is not a piece of junk. hoovs

ممتاز