Deliver to Israel
IFor best experience Get the App
معلومات عنا
دعم العملاء
احصل على التطبيق
قم بتوجيه الكاميرا لتنزيل التطبيق
حقوق الطبع والنشر © 2024 Desertcart Holdings Limited
Features: Model: Double Sided Textured PEI Powder Coated Spring Steel Sheet Size:220*220mm(With magnets) Material: PEI powder coated hardened steel spring sheetFilament Material Compatibility: PLA ABS PETG TPU PVA, etc. Advantage: (1) Two-in-one type of PEI powder coated type make it more easy to use(2) Easy to take off the models by bending or popping it off (3) Material Compatibility range is wide, almost all the filament is Compatible (4) Durable hardened steel helps lower running cost especially for long time printing (5) Make it possible to add inductive Z-probe and add ABL for some printers need to be upgraded Maintenance: (1) Wipe the print surface before and after a print with isopropyl alcohol to keep the surface clean (2) Make sure that the distance between nozzel and surface is far enough to protect the surface being scratched(3) If printing PETG, TPU, TPE, and RYNO, make sure the bed is heated BEFORE attempting to remove the prototypes from the bed Package includes:1PC*steel sheet After-sales Guarantee: Replacement and refund application for any detective item will be acceptable. Further needed, please feel free to email or Q&A us, we and our engineers are very happy to assist you.
M**Y
Oustanding Customer Service
the magnets it came with are not strong enough to hold the plate on its own and if your print fails during layer 3 or below may the gods owe you a favor trying to get the filament off the plateUpdate: seller contacted me and set me another magnetic bed surface and seems to work fine now, outstanding customer service email responce in 24 hours every email.
M**T
Works great, prints stick well, and the textured look is amazing
Really excellent product, especially for PETG. So far I’ve printed PLA, PETG, and Flex (TPU) and they have all stuck great and came out great. PETG works best from my experience, but the texture you get it awesome. Virtually hides the first layer lines!Do note that if you use Flex/TPU filament you need to adjust your Z nozzle offset up ~.1mm or it’ll stick too well (and possibly peel up the textured PEI)I seriously recommend this to anyone who has any trouble with bed adhesion.The picture is black Overture PETG
C**.
Doesn't stay put!
It slides all over the bed, the magnets aren't strong enough to hold it in place.After clipping it down, the bed adhesion is very nice. Needs either more, or better magnets.
D**A
Works with PLA amaxingly well! Let it cool all the way down and the part comes right off, no hassel!
I did have to crank up the bed temperature five degrees.
M**P
Parts stick great and release easy once cooled down.
Had to make a few adjustments to the first layer height and bump up the bed temp to 60C but after doing that the first layer goes down nicely.
A**R
Prints Stick Easily
Prints stick well, however a Geetech A10 has a slightly larger bed than advertised.
T**B
Really disappointed, painter's tape is much more reliable
Beware. I can't get this to print anything reliably.It will expand up to half a millimeter but ONLY during the heat up process!! Once it settles is contracts back down! So you can NEVER get a first layer laid down properly, and during the print it will make the nozzle mash into the print. Ugh. Very frustrated.Also, I had no idea PEI was so coarse. I expected a matte surface, or something that 800grit sand paper. It is more like 60 grit and bumpy.
W**B
Great quality, but surface too rough
The rough surface causes this sheet to be uneven, but it works fine if you have an ABL sensor. Even with my bltouch, I still can't get a perfect first layer due to the surface being too rough.
ترست بايلوت
منذ 4 أيام
منذ 3 أيام