DC HOUSE12 Inch 12" High Speed 14mm/s Linear Actuator Motor 1000N DC12V with Mounting Brackets

Great product

The media could not be loaded. I wanted to wait a while before reviewing this because I was concerned about longevity from such a relatively inexpensive linear motor. But "so far, so good" ... and I'll update this review if/when it fails at a later date. (Whoops; see update below.)I'm using it to open a fairly heavy wooden "man gate" in my backyard fence, and it has plenty of power to do so. I teamed it up with a remote fwd/reverse controller ( https://www.amazon.com/dp/B0CSN27T1D ), which worked out perfectly.I'm a little suspicious of its IP54 claim, but we've had tons of rain here and it's holding up well. I may add a simple rain cover for it soon, for additional protection from above.Update: At the 9 week mark, my fence gate had swollen with rain so that it wouldn't close all the way. But the motor was trying its darndest to close it. I found the gate problem some days later, and the motor had burned out. No fault of the motor, but beware that it WILL burn out if you keep power applied for a long period of time without it being able to move to its STOP open or close positions.Update 2: I ordered a replacement, and once it arrived I installed it onto my fence -- and found that its CLOSE position was about 1/8" shorter than the first one. The drilled hole in the rod is in the same position relative to its end. The issue seems to be that the STOP limit switch adjustment is a little different between units. It would be great if there was access to adjust those open and close limit switches, but there is not. So I had to move over my fence bracket that 1/8" to compensate.

I got this to move 3 zombies on a cam pivot. I have not finished my assembly yet but tested it & seems to have plenty of power to do what I need. Not sure why this says high speed. I have a high speed actuator that moves 12 " in about 2.5 seconds. This one takes about 22 seconds to move the 12 " . Zombies don't move too fast, so this will work perfect. It's also very quiet when running, that's good since I don't want to hear the actuator over the sound of Zombies moaning.

They work well for a good price

Very good product at a good price

Very pleased with this unit. It's very quiet and really powerful. The customer support was also great. I had some questions and they quickly responded with what I needed to know.

I need a replacement it never ever worked. It says it has a 1 year warranty, however it passed the Amazon 30 day return. Send me one that really works and I'll fix the review.

Generallly this works OK, and meets its specs. However, the machining of the mounting pin holes is shockingly bad. Ordinary good manufacturing practices produce products with better tolerances than a hobbyist machine shop can. This is much worse than hobbyist machining level.The pin hole (at the motor end) is not perpendicular to the rod, which can be checked by mounting the actuator in one position (eg. motor facing east), and then remounting it after rotating it 180 degrees. On mine, the difference in rod end position was about 1.5 inches, meaning that the hole was drilled a couple degrees from perpendicular. Some hand filing with a rat tail file trued mine up enough to prevent binding, but of course, the hole is no longer round or straight.Suggested improvements: stainless steel anchor brackets and pins to make it more suitable for use outdoors. And, of course, standard machining.