CC3D Silk Black PLA Filament 1.75mm 1KG 3D Printing Filament Silky Black Gloss Shiny Metallic PLA Black 3D Printer Material FDM 3D Printer

Good value, prints well and has a nice sheen the makes the finished parts look great. No difficulties with adhesion.

This filament has the perfect sheen - not quite plastic, not quite metallic, not quite black, not quite gray. If you print with slower speeds it comes out perfectly nearly every time. I just designed these spear vases and it was the perfect material for the job. I'm in love with this filament!!!

It does make for a nice print. I had to turn my heat up quite a bit, and I found my nozzle was clogging during long prints, it is a new nozzle. I haven't tried to increase the nozzle heat some more yet though, I will the next time I make a print. I won't tell you my temperatures since every machine is different, but I would say start about 10 degrees higher than regular PLA. The material itself seems to be stiffer than PLA+ that I've been using, a little more brittle, and the filament will kink if you bend it. I was able to reproduce the look that is advertised in the picture.

The media could not be loaded.  I was pretty happy with all this filament performed in my bambu lab X1 carbon. I used it to make a bust, and I was very satisfied with the plastic and the bed adhesion. I had no issues with clogging. The spool was a little bit brittle, and when I dropped it a little bit, I broke the rim of it overall, I feel like it’s a good value for the money and the print turned out great!

Love the color and prints great. Haven't had any problems at all.

I run a 3d printing business and I've tried lots of different filament. This works the best. Looks good, good adhesion, good price. I use a Prusa i3 MK3. One of things that helps is setting the nozzle temp hot at 230C and slowing the speed down to 90% for the first layer. Then on the following layers I keep it at 210C and at 100%. Works great.

The media could not be loaded.  This PLA will clog the nozzle when the temps drop, so the only negative I can say is pull it out, snip the end and your off... It looks gorgeous, and I can print for days and have with this PLA. It likes 200-210c on the nozzle, and 65 on the bed. I've never needed to preheat or dry this PLA, works beautifully.

Replaced my extruder, my hot end, my nozzle all because i couldn't get this stuff to print well.Reloaded Cura, firmware, etc...Extruder kept slipping with this stuff. I am not sure if it is a bad batch or too thick or what.I am not sure why it continues to clog the hot end, i increased the temp to 230 and it finally started extruding better. Extruder still struggles to push it out. However, the prints never finish (finish early). After 20 attempts to print a spool holder i gave up and went back to a different PLA. Have Not had one problem so far.

Tardé en encontrar la temperatura ideal. Está por arriba de la recomendada por el vendedor. Pero una vez ajustada la temperatura. Imprime de lujo

This filament prints beautiful for me and and I have had no problems with it.the surface look is like the pictures.I print it at 220°C and 60°C bed temp on my FLSUN V400

Good quality product

J'ai fait des pièces fonctionnelles, il est assez simple à utiliser et est plutôt solide, bien laisser refroidir la pièce avant de l'enlever du plateau.

Queda un resultado muy pero que muy bonito