High Pressure Washer Hose 50 FT, 160 BAR 2300 PSI High Pressure Cleaning Hose 15M, Cleaning Kit Include Adapter for Karcher K Series(K1-K7) and Lavor

This is an awesome piece of kit. Easily plugs into my Karcher press washer.Two of my drains were backing up, my house was built in the 1930's and has combined drains for waste and storm.I usually get a professional in to clear my drains once a year at a cost of at least £60 each time.I noticed that he uses a similar pressure hose attachment to this one so I decided to give it a try.It works works works. So simple, it pulls itself through as it cleans. Wish I'd bought one years ago.Great tool. If you've got problem drains buy one now. You won't be disappointed.

I purchased this to try and clear a blocked soak-away drain.It worked perfectly. The drain had silted up and this cleared the blockage backwards allowing the silt to be scooped out and the water to flow freely again.I then used it on my other drains as one had also developed a small blockage and again it worked perfectly with the hose drawing itself along the pipes due to the backwards facing jets.Would recommned.

If you have ever have had a blocked main drain. Only then you will know what this is for. In our restaurant we use the traditional means which was to push the flexible plastics pipe one by one till it reached the clog then hope it’s squeeze through the clog to stop the blockage. This process is painfully disgusting.This is amazing. It’s follows the same principle but it’s powered by the jet wash, no need to keep these long and extensive plastics poles anymore. I didn’t know anything like this existed.You still need to wear plastics gloves, well I would at least suggest this.

Loved it. Truly impressed with it's ability to drag itself into the drain, much less pushing needed than I expected. Flexible enough for the bends but solid enough not to kink. Sorted a problem I'd been putting off for months thinking I'd need to spend a fortune on a professional service. Pro tip: don't hold the end and pull the trigger on the karcher to check it works - remember the jet goes backwards lol.

Highly effective, way more so than traditional drain rods and much easier to use. Can't believe I didn't buy this years ago. Only snag was it would go round a 'U' but didn't seem to want to feed out of the final 90 degree exit (rods wouldn't even go round the bend). Solved this by approaching the trap from both upstream and downstream which did the job.

so attach to your favourite karcher and place tip about 6 inches into drain, press trigger and get ready to hold onto it.they rely should have named this the rat up an aqueduct, as it finds it way to the blockage, and then with a few pulls and releases punches through.a bit more awkward round some u-bends and it can get stucjk if the flow has kinksother than that for 20 ish quid, dont wast your money on dynarod man.

I have had builder grouting and all my drains and poorly emptying. Bought the drain cleaner attachment for my Karcher pressure washer almost a 1/3 of the Karcher one. We had a approximately 100 mm drain inspection cover in line with most modern properties, so plunging not a option. I am pleased to say that both drains are now clear. I attacked via the inspection cover and directly in the drain and it quickly cleared the blockage. Brilliant and plug and play. £60 call out by drain people to use the same kit. Less than £30 and drains functioning as they should, that's what I call value for money.

If you have a karcher and a blocked drain this is idealOnly problem - as it comes with no instructions- is working out how to attach itI spent five minutes trying to work out how to attach it to the karcher. Finally the penny dropped. It is an attachment! Therefore it attached to the “trigger”That has the added benefit of making it much longer too.Even with moderate water pressure it happily propels itself down the drain pipe. Feels as good as the professional kit used by call outs