LK 6 Pack Screen Protector Compatible with Apple Watch Series 6 5 4 SE 44mm Series 7 45 mm Flexible TPU HD Clear Film Bubble-Free (UF-010)

Seriously, this is the best Apple Watch screen protector I have tried out of three different brands. I am very picky about how I want my watch to look and a trend I noticed with previous brands was that the protector would make the watch look very cheap and bulky and that was a huge disappointment for me. After returning the previous brands, I ordered this protector and I am so happy that I did. This screen protector was extremely easy to install and went on without any issues, air bubbles, or scratches to the device or to the protector. I have had it on for a bit more than 24 hours now and the edges are still perfectly adhered to the watch face and I cannot see any scratches yet. The screen protector is extremely thin which is what I like most because once its on, you seriously cannot tell that it is on. If it weren't for the tiny lip of the screen protector, I wouldn't be convinced that there was even a screen protector on the watch. Here are some pros and cons that I have noticed within the first 24 hours of using the protector: Pros: -Very thin and almost impossible to see on the watch -Very easy to install with no air bubbles or scratches -You get a pack of 6 which should last for quite a while if you are careful with how you treat your watch -You get a free watch band with these screen protectors Cons: -There is a line down the middle of the screen protector that can only be seen in direct sunlight and in some very bright indoor lighting. This is virtually unnoticeable unless the watch is off and you are looking at it in direct light. I think this line comes from the way you have to fold the screen protector in order to adhere it properly. (this can be seen in the first picture) -This protector is very thin and although that is also a pro, I am not sure how long it will hold up due to the thinness of it. Overall, I am very happy with my decision to purchase these protectors over the other brands I tried. It is by far the most clear, the easiest to install, and seems like it will hold up well. I have not used it long enough to determine how much it will hold up to every day use of the watch so I will update after a while.

I am traditionally a Zaag aficionado, and for my iPhone and iPad I will not use another product. However for my Apple Watch I found their products difficult to install perfectly and very bulky. I searched the web for an option and found the LK Screen protector, I was concerned with the cheap price but found out I was wrong. I give my watch a very sound pounding daily with workouts and doing general construction work. The protector has worked perfectly, the only time I had to replace it was when I accidentally fell onto a concrete wall and the rough surface ripped a section of the film off the watch. The watch underneath was completely intact and all I had to do was replace the screen in minutes and I was off to the races. Installation if you follow the video that comes with it is seamless, no bubbles either time I have done it and the equipment the box comes with makes the job very easy. The touch screen I have no issues with responsiveness and the only thing I have outstanding is to see how it handles swimming in the pool, with covid this year I have been unable to do this, but I can tell you daily hand washing and showering produce no issues. From my experience with screen protectors this is one of the best I have found for ease of installation, durability and price. I have used the screen protectors now continuously for 4 months.

These things are amazing. They are quite easy to install and are almost invisible on the the watch. It is good that you get 6 of them because they don’t last very long. I had one last 3 weeks and the next one few off after a couple of days. The stickiness is good but if debris or durst get into the corners it falls of very quickly. It’s not that that big of an issue because you get so much. Another thing that bugged me was that the screen protector didn’t reach the edge of the screen. It still bend around the screen but there was about a millimeter that was still uncovered. Overall the screen protector is unnoticeable. The screen does feel different and you may see some distorted reflections but other than that it is perfect. The gel is incredibly thin and still protects very well.

This screen saver looks like it will protect my Apple SE fine. I has also installed a clip-on style protector for extra protection, and they work fine together. I did not have any problems installing this (went right on my first attempt), and the edges are sticking fine after several weeks. In fact, one of the clip-on protectors I bought catches on the edge of this saver when I remove it, and it's nicked the film edge a little bit...and the edges have not pulled it away. That's about as good a test of adhesion you'll get. I have 4 tips: 1-The installation video url provided with the product is a dead link. Just search on the provided url in your browser. The current link will come right up in the results. 2-Do not remove the band from the watch. There is no need to do so, and you lose the only way you have to hold the watch secure. Next time I will use non-permanent painter's trim tape and tape down both sides of the band to the table to secure the watch in the provided installation stand. I have no idea why they tell you to remove the band. 3-Clean the entire watch face with the alcohol swab, including all edges of the screen and the entire circumference of the bezel. I think that some of the "peeling edges" issues may be due to improper cleaning of the entire surface...the film wraps down & around the screen, it does not just sit on the top. 4-After the screen is installed, the video tells you to press the film down around all the edges. There's a specific "pulling in opposite directions" process. Due to the "peeling edges" comments here, I spent a lot of time doing this. I then used a cleaning cloth and went over the film many times, pushing it down and paying particular attention to pushing down the edges over and over. I'm very happy with this product. And I got 5 spare films.

Update after 6 months: this product is great and is truly self healing. I let my 9 year son wear my watch and he banged the watch face on something which created an air bubble. After a few rubs over the bubble with my finger it looked good as new. I added a before and after photo to show what it looks like right after you put on the screen protector. It will take 1 day to even a full week for all the air bubbles to go away. Once the bubbles are gone, it looks fantastic. Update: after 3 days all of the bubbles completely went away, even the small one that I circled in the photo is gone. ————————- I bought this product after having a terrible experience with the screen protectors that require a spray. The spray one just did not work for me and the edges kept coming up. I returned that one and came across this item. Make sure to watch the video to help with installation, the sticky foam holder really does help. The first one I installed following the exact instructions from the video and there were tons of bubbles and a line across the middle. I was so bummed and assumed that I did something wrong so I took it off and put on a second screen protector. The second time around, I did not bother following their instructions exactly. I just took off all the layers and placed it directly onto the watch screen (I do this with phone screen protectors all the time). It had the same result, bubbles all over and a line! I figured the product was defective and bad but because I had no other screen protection I decided to leave it on until I could find a new one to purchase. The next morning I put on my watch and noticed that 90% of the bubbles were gone! The instructions fail to highlight a key point: LEAVE THE SCREEN PROTECTOR ON OVERNIGHT OR LONGER to allow for the bubbles and line to disappear. Mine all went away on its own. Right now there is only one small bubble in the corner which I believe should go away on it's own in another couple of days. The reason why I’m giving this item 4 stars instead of 5 is because not all of the screen is protected. It covers less than the spray one. If only they could re-evaluate their product measurements so that it could provide true edge to edge coverage then this would be 5 stars.

For starters, I watched the installation video before even starting. Then I followed the video step by step, with somewhat mixed results: The rings are very helpful, which keep the Apple Watch in place during installation. Although I did notice some stickum on the back of my mother’s Apple Watch after installation. So I used the included alcohol pad to clean it, then dried it with the (also included) dust cloth. As for the installation itself, unfortunately on my first try, the #2 tab actually separated from the piece it’s supposed to lift off, so I had to abandon that screen protector and start over. Also as one previous reviewer had pointed out, there can be a line right in the middle of the screen protector once installed, the line where the #2 and #3 peel-off pieces meet. Consequently I had to remove the second screen protector and install a third one – when I managed to get rid of the aforementioned line by lifting the part under the (already removed) #2, while using the squeegee to remove #3. SO... I ended up using 3 screen protectors to get 1 good installation. Then I proceeded to install on my mother’s brand-new Series 5 AW. And having learned the lessons from installing on my own Series 4, you’d think I’d get it on first try. Alas no such luck. I also ended up using all 3 of the remaining protectors, before getting an acceptable result. (I even used a magnifying lamp this time!) Even then there are still tiny air bubbles once installed – which my Lasik eyes can see, but which I really don't think would make much if any difference to my elderly mother! UPDATE 22 February 2020: The screen protector started falling off my AW all by itself last night, even though I haven’t done anything ‘unusual’ with my AW – no swimming, no taking a shower, not scraping it against anything... I used the Apple Pay on my AW three times last night, and by the 3rd time the screen protector curled up in one corner and is now totally unusable. (Please see photo) Since I had already used up all 6 protectors for 2 AWs, I’ll have to look for an alternative. I just hope my mother’s brand-new AW is still protected – which I gave her as a surprise present only 2 days ago!!!

I had some difficulty applying it even after following the instructional video. I kept getting bubbles in the middle of the screen. I’m very good at installing screen protectors and rarely get bubbles on phones, tablets, etc, but this one was a different story. After my 4th attempt and 3 wasted screen protectors, I finally was able to get one looking decent. Honestly, it’s the installation process. I feel it would go on better if the screen was applied in one shot and not half and half. Watch the video and you’ll understand what I mean. Basically, you stick on half of it then lift it a a little and stick on the other half. They have a plastic backing that is split in the middle and designed to apply the screen in a 2 step process - half first then the other half after. I bought this since it was recommended to me when buying the Spigen Rugged Armor case/band for the series 5 44mm Apple Watch. DO NOT BUY THIS IF YOU ARE GOING TO USE THAT BAND. This is not compatible with the Spigen Rugged Armor band/case. The protector covers a large area of the screen, and the case will press on the edges and lift the protector off of the watch face. All in all, wasted money. I’m sure others have had better luck with it, but I can not recommend it based on my experience.

The first time I purchased this was in Jan 2021. I purchased again recently (June 2022) and I have a couple things to say about this product. It was worth the buy, I tend to accidentally hit my watch on things as I move my wrist throughout the day and this has done a good job of protecting the screen from scratches. I do notice that the lifetime per protector is 2-4 months with day to day wear and tear but since it comes with so many, it’s not a hassle to install a new one. I repurchased not because I ran out, but because I lost the ones I had left (2). It’s easy install, every time I change it out to a new one I follow the step-by-step video guide included in this product’s page here on the Amazon app and have had seamless installs every time. Take your time installing them, don’t rush, look through the instruction video first and then watch as you install each step. The only complaint I have this second time I’m purchasing is that, like shown in the video, the first time I received sticker holders that would hold the watch in place and stick to the surface of where you are doing the installation and it was a fast and easy process. This second time around (more than a year after my initial purchase) those sticky circles were not included and there was a silicone watch holder instead. The grip on this sucks, as I was installing the new screen protector, the silicone holder kept moving around the table through the whole process. I had to hold the watch from the opposite end of where I was working on, or else the whole watch+holder would move around and even lift as I was lifting each of the tabs off. This was a tedious process that could’ve been avoided had they not changed the watch holder. I didn’t take off any ratings because of the watch holder, simply because the product itself (the screen protector) works well and I’ve had no unexpected issues with the actual protector. Just a warning for those who will be purchasing in the future and get the silicone holder. That’s the only thing I’m not entirely happy about.

Ottima pellicola, semplice da applicare e una volta messa sembra invisibile talmente aderisce bene al quadrante dell’orologio. Sono rimasto veramente soddisfatto

Bought these as I’ve purchased ones similar previously. They do peel around the sides if they’ve been on for a while, but what do you expect for this low a price & to get 6 of them! They’ve protected my series 6 watch from occasional scrapes against the wall, so I’m happy with them overall. Been on holiday recently and took the watch into the sea with me, protector is still holding up fine! As confusing as the application may be, the videos provided make your life so much easier and after putting them on a couple times you get the hang of it. I’m a pro now!

Effective product and good value for money, barley visible on the screen but give good protection. Doesn’t impede on clarity or touch sensitivity. I have a series 7 and it fits very well and is easy to install especially thanks to the little rubber stand they supply. Find myself going back to this product every time.

Schnelle Lieferung, gute Verpackung. Preis/Leistung sehr gut. War schnell anzubringen auf meiner Uhr. Man sieht es auf der Uhr garnicht und hält Kratzer ab. Hält was es verspricht

i was doubtfull when i first bought this product but after several month of use i can say it's a must for apple watch owner: -easy to install -barely noticable when installed -protects really well againts scratches, chocs, ... -print resistant -real "self healing capacity" -several screen protector in the box i have seen reviews stating that the screen needed to be changed regularly, it's been 3 months (every day use) and i still haven't felt the need to change the first screen (and still looks pristene). my only "complaints" would be that it took me a while before getting used to the feel of the film.