GEEETECH TPU Flexible Filament 1.75mm, 3D Printer Filament 500g 1 Spool (Transparent)…

After printing with PLA and PETG for some time, I decided it was time to try something different. I have seen so many flexible prints around and always thought it would be difficult. Anyway, I bought this TPU filament and after some reading and adjusting my printer, I decided to print a phone case for my mobile.This was my first print with TPU and it worked great. Not sure how you rate the flexibility but it seems very flexible. Using a textured sheet gave the print a nice finish on the bottom.Below I have added some tips for printing:Bed temperature = 50 degrees or less (too high can cause the print to warp from the bed)Hot End temp = 220 degrees first layer then 210 degress afterPreferably use a direct drive printer (not bowden, although it will work)Loosen the extruder drive to a minimum and too tight will cause the filament to flex and jamPrint slowly around 20 to 40 mm/sKeep retraction to a minimum or off. I used 0.2 mm retraction length @ 30mm/s speed.Make sure to use something like windex or glue stick as a release agent on PEI sheets or it will stick too well and damage the sheet.Hope this helps and happy printing.

loved the colour of this filament and printed nicely, this the first time i have done TPU print was was natrually worried about the print but it went well and the modle looked good.Well packed mini spool that is wound on well and the vaccum pack is greatmy huge issue however is that the spool didnt fit on the spool holder on the printer now i own two geeetech printers and it didnt fit on either the hole was too small so had to despool the entire roll and spool it on to an old empty one (luckly i have one).over all this was a pain and wasted time and now im worried it wont feed correctly as it not as good as how the manufacturer would spool them, over over happy with product unhappy with the spool hence the 4 star, filament was 5 star however.

Got delivered today packaging was all torn and ripped. Tried to print and the quality was very poor not only that i was expecting a 1kg reel for that price and its only 400GRAMS which isnt great to be honest!!!!!!! Would not recommend. CAN SOMEONE PLEASE CONTACT ME REGARDING THIS PLEASE

Because I have had so much luck with other Geeetech products i took a punt at the TPU and wow i wasn't disappointed the colour so vibrant and i had no issues with adhesion like other Geeetech filaments when i checked the rolls I tested the diameter and it was perfect with in the tolerance that they state perfectly wound and a dream to print with. would 100% recommend

Using the TPU95 setting in cura and a magnetic bed it was super simple to print with this material. Normal setup (Bowden tube). Filament is flexible and has that rubber feeling but is extremely strong once printed.

1st time using any kind of TPU and very impressed! Running it through a mostly stock Ender 3 V2, and whilst many say that you need a direct drive extruder, I’ve had no issues with the Bowden tube setup. Really keen to try more Geeetech filament as very impressed with this TPU!One word of warning - read the description carefully. Was surprised when a 400g roll arrived in the post! Luckily the quality means I don’t feel disappointed!

I find this prints well around 220c for me on both of my machines which are bowden setup. Around 40mm/s with the proper extruder is possible and even faster.I would say its around 95A hardness.

Was the perfect filament to use to print the head of a warrior figure I had been working on.