Timber Wolf Bandsaw Blade 3/4" x 93-1/2", 3 TPI

I bought this for my Grizzly GO555 14" bandsaw. I needed a blade for resawing. It is a replacement for the identical blade which I accidentally damaged. There are some reviews that speculate that this blade is a knockoff due to the price. My previous Timber Wolf blade came from a well known national distributor and was packed in exactly the same way, no identifying info on the blade. The two blades side by side look identical and have the same feel. I installed the blade, I'm quite particular and first tested it on a piece of 2" red oak. It cut a 1/16" thin piece from a 30" board with no drift and cut very rapidly and cleanly. I next tried resawing a 3 1/2" x 28" curly maple. The blade cut it cleanly, and straight with no drift. My micrometer showed the cut piece had 1/100" variation between one end and the other. I used the fence that came on the saw, not even a resaw fence.This is a great resaw blade. Installed properly it will do a quick, clean job of resawing. As with any Timber Wolf blade reduce blade tension about one blade size on the gage. Mine is set at the 1/2" mark rather than the 3/4" mark. Center the blade on the bandsaw tires and the guide bearings on the center of the blade and you should be able to resaw without drift.Complaints have to do with Amazon not the seller. Your package tracking is a mess. I didn't get notification from Amazon that the package had been shipped until after is was delivered. If you can't do better than three days behind don't bother. And what is wrong with using USPS, UPS tracking anyway. They are way better at tracking than you are.

Great blade. First thing I did was test it in some 12/4 mahogany and it was smooth and straight. Used again on 12/4 walnut to resaw with a straight edge guide and it worked great.

Even with low tension, the 3/4'' blade makes a very smooth kerf, easy to sand or to plane.

Have not used it much, hence my slightly reduced rating. Far and away better than the blades you can buy at typical blades seen at the local big box and even some of the specialty stores. Sharp, stable, and comes with detailed and useful instructions about how to use it properly.

Good quality and fast service

These are the best steel blades I have used and when saw is set up correctly wander very little with good finish.

Worth the money! Cuts like crazy. Finish is ok and cuts are straight and flat if you follow th3 detailed mounting instructions. At first I mounted the blade too far back and rubbed my plastic guide so had to adjust and from there it was great.

Bought this blade to mount on a new old stock AMT 14" bandsaw I picked up. Never a high end brand, the blade supplied by the manufacturer was making me doubt whether the saw was worth messing with, but once I got this blade on, tensioned, and the saw adjusts, I ripped right down some ~4" thick mullberry wood with this without my little 1HP motor even bogging down.I'm extremely happy with this purchase.

Its great!

Great product

Just received