Lead-Free / RoHS 3 Compliant / REACH Compliant Product Highlights Safe for Use With Electronics Seals, Bonds, Encapsulates Resistant to Various Chemicals and Oils Non-Corrosive, Non-Conductive Flexible, Durable, Non-Degrading Withstands Moisture, Vibration, Abrasion Common Uses Protecting, Sealing and Insulating Corrosion Sensitive Electronic Components and Electrical Materials. OEM Commercial and Industrial Manufacturing for Flexible Permanent Bonding and Sealing. Instructions Surfaces should be clean and dry. Unscrew cap, cut the tip off. If tooling is required, do so within the first 10 minutes after dispensing. Apply the silicone to surfaces and remove the excess silicone after tooling with a dry clean cloth. Allow the silicone to cure completely. At room temperature, 25C (77F), and 50% relative humidity, the silicone will skin in 10 minutes and fully cure in 24 hours (1/8" bead). The silicone will reach its maximum adhesion in 7 days. Higher humidity accelerates curing. Specifications Meets and Exceeds: ASTM C920, UL Recognized VOC: VOC Compliant (<3%), Low Odor Operating Temperature Range: -57C to +204C (-70F to +400F) Curing Time: 10 min (skin), 24 hours (full cure), 7 days (max adhesion) Color: White Size: 20g (0.7oz) Squeeze Tube Storage and Handling Store refrigerated or at room temperature 3-25C (37-77F). Shelf Life >36 months Transportation This product has no shipping restrictions. Shipping below 0C (32F) or above 25C (77F) for normal transit times by ground or air will not impact this product's stated shelf life.
G**R
Great Product... Set up time requires patience.
I was looking for something to secure torroidal cores/inductors and a transformer to my PCB on a radio project and it was easy to apply. Precise application (a dab on components) and a dab on nuts to secure and prevent loosening. Give it a couple days to fully cure and it IS Tough!This has made my finished board more robust and durable for travel. Highly recommend.Some reviews are out and out inaccurate... this is NOT silicon grease and Not a Traditional Adhesive as in glue.... it is similar to a caulking sealant, only in a small tube for small applications.
R**N
Works as Advertised
I can’t say much other than it works as advertised.
C**F
Safe for electronics!
This worked very well for installing a pcb in a housing and attaching it securely. Regular silicon or RTV will attack the pcb traces - this product will not.
J**.
Like the Doctor Ordered...
After shopping all around town, because the sales folks in our small community did not understand the usage of Electronic Grade Silicone. I as usual, turned to Amazon for the product I needed. Well it worked, the Silicone is holding in place, two MIcro-SD cards in a Hammond XK-5 with out the fear of the Micro's popping loose...The only complaint is that the Silicone is Black and not the typical Clear. I guess the Black shade indicates that it is Electronic Grade.Enjoy,dmc<><
J**9
Great for sub amp repair
Works. I used this to secure some protect/secure some leads on a repaired sub amp. No issues.
J**H
Perfect for crossovers and amps
Used it to hold some amplifier components from rattling and to attach some crossover components to the board. Worked great for both.
M**T
Tiny Size! 0.7 Ounces should be the measurement listed not 20 grams
Standardized Measurements would be nice!It is also not an adhesive (which I am aware of) but it is misleading to others.I use this compound to seal the ends of custom length LED strips for outdoor installations. So I go through a lot at a time.While quickly needing to order some for a project I selected this as I use ChipQuik for Flux. I ordered thinking it was a nice price for something the size of the ASI 388 2.8 Ounce tubes that I normally use. The deceptive use of grams instead of Ounces made me assume I was getting 2 Ounces of the stuff not 20grams. I was not happy to see that I received a tiny little container of Silicone. I now have to not use the Amazon App for purchases as these details are too easy to miss on a mobile device.Amazon refunded it without a return (thanks!) but I still have to order a proper sized one as this is not nearly enough to finish a project and I doubt it will stay uncured for long after opening.
J**N
Not that great
This product was not that powerful the adhesive stopped working after 10 min.
ترست بايلوت
منذ يوم واحد
منذ 3 أسابيع