Disney Mickey Mouse Mug Warmer with 12 oz Mug by Select Brands - Coffee Cup Warmer with Ceramic Mug Included - Electric Warmer Plate for Home & Office - Disney Kitchen Accessories - Mickey Mouse

This set is so cute. The cup is solid and the warmer gets hot enough to maintain the temperature of a hot drink for as long as it takes for you to finish your drink. I like to fix a hot cup of coffee and take my time sipping it while reading or while working on my computer, and this mug and warmer are perfect for that task. Make sure you keep this burner out of the reach of small children while in use. This is such a great little gift, I have purchased two sets and I need three more for other family members. This was a great purchase.

This cup warmer is the best thing for our tea drinking habit! We used to fix large cups of tea for my husband and I and then end up finishing off a cold cup of tea, having to reheat the same cup of tea multiple times in the microwave, or dumping cold tea down the drain and fixing another hot cup of tea. Now...we can have up to a 16 oz. cup, filled with tea and it NEVER gets cold! Or any cup up to 3 7/8" in diameter.....wich is actually a big cup! We have used a cup on this warmer that is 3 7/8" in diameter and the contents of the cup stayed piping hot. My husband has used a very tall narrow cup on this warmer and it stayed piping hot the entire time. The warmer does NOT have an auto shut-off or an in-line switch on the cord. The power switch is on the front side of the warmer and takes very little pressure to turn on and off. Do NOT put your fingers (or any other part of your skin) on the red warming plate once it is turned on. It warms up quite quickly and takes several minutes to cool off once the power is turned off as well. PLEASE USE COMMON SENSE WHILE USING THIS PRODUCT! When the fluid level is low in the cup, the fluid becomes more than hot enough to burn the inside of your mouth.....sip carefully! As you see in the pictures, I am using a different/larger cup that is thicker than the cup that comes with the warmer. This cup still stays piping hot. My plate needs to be wiped clean, but you can see that when it is on, there is a red light that is emitted from around the power button on the front. The picture of the bottom shows that there are rubber feet that are slightly lower than the cup warming device so that air can circulate underneath it. Do not block the vent on the bottom side. If you smell burning rubber then it is advised that you smell the underside to be sure there isn't an electrical short causing the smell of burning wire insulation coming from inside of it. The power cord is 6' 4" (or 64") long and also comes with a small velcro cord tie on it. That way, if the cord is too long, just tie the excess off to keep your area nice, neat, and orderly. I have had half a cup of tea (the cup in the picture) and the temperature is 130 degrees Fahrenheit. Several people have complained about a foul odor when they first used this warming plate. Yes, it was there. I would say that it lasted several hours but it was nothing bad enough to make us turn either of our cup warmers off or to stop using them. One review stated that this odor caused his/her drink to taste the same as the odor. We did not find this to be true with ours. I would think that this person may actually inhale lightly when sipping his/her drink which can make anything taste funny. I would recommend this cup warmer to anyone who enjoys a hot drink every time they pick up their cup. The plate wipes off easily with a damp rag. NEVER submerge the product in water! All in all, this is the BEST cup warmer I have ever seen or owned!

I LOVE this thing for the very simple reason that it keeps my coffee HOT. Not lukewarm. Hot! What is the point of getting a mug warmer if it's not going to do that??? I tried several brands, some of which had big-name brands attached to them, and none of them (I now realize) had the wattage necessary to actually keep hot drinks hot. They all kept the coffee at just a tad over room temperature, which might be fine for some people, but not for me. So that's what I love about this one. I also love that it holds any mug - any size, and that the base is sturdy - you don't worry your drink is going to topple. You can literally leave your coffee for hours and it will be hot whenever you decide to take a sip. Right now I have a cup of coffee on it. I'm sitting on the couch with my laptop writing this, and the Mickey warmer is on the table next to me. With the old warmers, if I took the time to type something as long as this review, when I took my next sip, it would not be hot enough for me! I LOVE that it comes with a Mickey Mouse mug!! The mug itself is actually worth the price of this set! What I do NOT Love: 1) The red plastic coating on the surface is not durable. After just a week or so it already looks old and scuffed up and the red whatever that coating is, is scraping off just from normal use. 2) The base heats up, not just the part that holds the cup. You won't burn yourself if you touch it, but if you have to move it while it's on, it is uncomfortably hot to touch. What I would really like to find is an affordable mug warmer with 30 watts that looks a little more elegant, but all in all, if you like hot coffee... this is for you. Update: I am adding this in April 2022. I STILL live this thing. Wish the red coating was still there (it’s all gray now) but it still works and still keeps coffee HOT.

I am not normally a "review leaver", but I know I would have benefitted from a few key facts from others' experiences. 1) The product maintains the temperature of the coffee. It even seemed to heat it up as the amount of coffee remaining in the cup lessened. 2) The included cup works. It should be noted that it contains a slightly concave bottom. That is important because other products seem to only work with flat bottoms based on their reviews. 3) I have tried multiple other mugs on the product and it seems to work just as well! That is a major selling point for me in addition to #1.

I love it. Easy to use. Looks good. Perfect size, good quality, easy to clean, love Disney products.

Edit 8/30/2016: These are both going strong! Note: I previously did the mod to the wife's (see below - I removed the mickey ears cover on the button after it got stuck from being dirty), then let her use my stock one. I just today decided to undo my mod because it literally shocked me! Luckily, I saved the insert. I don't think it's very dangerous, but it was also annoying to reach in and find the button when it was super hot. And this thing does get super hot (which I love)! Edit 5/15/2016: To fix the 'button pressed down' issue, I took the thing apart and noticed the 'disney' button was just a plastic insert that presses on the REAL button (a typical momentary switch). I love the low-tech way this thing is assembled - just remove the rubber feet and 4 screws, and it just comes apart. The rubber fit just press back in! Indeed, it was a bit of coffee gunk around the button rim causing the Disney insert to not slide smoothly. Instead of cleaning and/or sanding down the button insert, I decided to just remove the disney button! But don't do this! It'll shock ya if you're not careful. I was just pushing the 'real' button inside the unit (see pic) to turn it on and off. The LED inside is insanely bright. Edit 5/14/2016: Some observations after using 2 of these for 9 months (overall, these things are awesome for the price): Only thing I wish these had is an auto-shutoff - 2 hours would be good, or even a 4-to-8 hour one would be nice. I'm surprised nobody's burned themselves on it yet! Performance: The mugs are still lookin' great, no scraping-off of the logos! The warmers get VERY hot! Maybe too hot when the coffee level is low, as when the level gets down to about 1/2 cup or less the creamer starts to form a skin on the surface! So I usually turn it off when the coffee gets down to 1/2 cup. It's pretty gross! I haven't used other warmers so don't know if they do the same thing. It's probably good, as it keeps it warm when full and you can turn it off as it drains. On my kill-a-watt, this draws about 27W the whole time it's on. So within spec! Quality: I bought the 2-pack. Mine is still working well, but still stinks up the place with that synthetic smell! But I haven't used as much as the wife uses hers. Hers doesn't smell, but I'm not sure it ever did... Hers still works fine but has developed a problem where the power button is sort of permanently stuck in the down position. It has become difficult to turn on or off. If not left in exactly proper position, it will even turn itself on or off. It's become fidgety. I should note that she's left it on many times for many hours, and it has no auto-shutoff - so the issue could be due to all that extra bake time! There may also have been a small amount of spillage into the switch, judging by the amount of dried coffee residue on the main tray. No definite proof of that though. The switch area is not sealed - there's a gap between the button and case for liquid to easily get in. Maybe they could have molded a little splash hood into the plastic above the switch to divert liquid. But hey, at this price, one can't expect perfection! --- Original Review 8/2015 below --- Very cute, and plenty powerful. The cup is quite nice. The heater is pretty smelly at the start as it bakes off whatever crap it's coated with, but that goes away after a couple few days of use. Hope I didn't get cancer from the fumes in my coffee!

I've been a perpetual student for the past 20 years, and have been through many, many mug warmers, including more recently Mr. Coffee MWBLK Mug Warmer and Norpro 5569 Decorative Cup Warmer . I use a mug warmer daily for 1-2 hours. Surprisingly, this is hands down the best warmer I owned, not to mention the cheapest. If you are considering the top contenders on Amazon, I've owned both of them. Mr. Coffee is just okay, the main issue being that it does not keep your beverage warm enough. More worrisome, the hotplate of one of mine started melting through the plastic, such that my mug would sit tilted on the plate. I decided to throw it away as I was not certain it would be safe to have a heating plate that is closer to the underlying cables and my desk than originally intended. Norpro was better, but the issue was that it was shoddily made (the hotplate became loose), and the on/off switch was not on the device so that I could not tuck the cable behind the desk and would have to reach out to the switch behind my hot coffee to turn it on or off. I should also point out that despite what other reviewers have said about Norpro, it does not have a ceramic base. It is a heavy plastic that looks like ceramic. The great thing about this warmer is that it hasn't on/off switch right on the base and it heats much better than Mr. Coffee and as good if not slightly better than Norpro. I should let you know that when first using it, it does have an off gas smell (much, much less intense that some of the other ones I've owned), but thankfully it dissipates over a few days. So, currently for what's available on the market, as of today this mug warmer cannot be beat. (I bought it for less than $10 on Amazon). I have to qualify this by stating that I've owned this for one week only. I note one review stated it died on him/her twice.

Good quality! Was a perfect gift for a coffee drinker and Disney Fan!