Legines 45 Degree Street Elbow 1/4" NPT Male x 1/4" NPT Female Brass Pipe Fitting (Pack of 2)

Fast shipping. Items work as expected.

I built an outlet manifold for supplying air at the front of my shop/garage, and this allowed me to kick the industrial coupler that was attached to the vertical tee on the pipe that came down from the filter that started out the manifold out at the same 45 degree downward angle to match the rest of the tees that were mounted horizontally from that initial tee.I wanted the couplers to be easier to attach to than if they would be if they were mounted pointing straight down, but didn't want them coming out at a 90 from the wall as that would cause undue stress on the couplers and hoses that would be attached to them. A 45 degree downward angle seemed just right, and this fitting allowed me to do that on the one tee that was mounted vertically that started off the manifold.

Good quality and fit.

works fine

Greetings. These were used to reconfigure a propane manifold so that two separate propane regulator and hose sets can be operated from the same propane tank at the same time. These fittings appear to be made from brass bar stock, though that is not explicitly stated in the description. The fittings are properly machined and worked very well. The square bar stock surfaces gave a great place to place a wrench to tighten them into place. The threading was smooth with no burrs or rough surfaces. These parts worked well.

I'm using these to add a second oil pressure sender unit and gauge to my car. This helped to fit the sender unit in a confined space.

used to offset an oil pressure sending unit on a 34 Ford. problem solved and happy with the results

Works as expected perfectly.