Credit Card Holder, 6 Premium RFID Blocking Sleeves with Clear Front for Easy Viewing, Prevent Identity or Financial Theft from High Tech Thieves

Card fits snug. No identity credit card skimming yet!

UPDATE: These have been re-modeled (a sample was provided to me by the company), and cards with raised numbers now fit just fine! Also props to the company for listening to customer feedback and standing behind their product. However, an additional 3-5mm seems to have been added to the width of the sleeve, making it impossible to fit in vertical slots, but it will fit fine in horizontal slots. That being said, it's possible that the additional width was necessary to allow cards to fit in more easily...but I suspect that making the clear plastic thinner (which they did) might have been enough on its own.If you're going to be using this for any sort of ID that needs to be visible, these are probably the best and most affordable you'll find currently - but if you're just using these for credit cards, there's better ones out there.Tested these with with my transit passes & proximity card and it did block the signal regardless of which way the sleeve was facing - so they seem to work well in that regard.Whether or not you can actually fit your card in these is sort of "luck of the draw". It is very difficult to get any card with raised numbers (ie: most credit cards) in the sleeves, even after using them a bit to "loosen" them up. I ended up getting two sleeves that were a bit looser to begin with, so I was able to eventually put my credit cards in fairly easily after loosening the clear plastic (which can be done by purposely wiggling the card back and forth along the inside edges as you're putting it in). Got three that were too tight to fit anything into thus far, and one that was workable-able but still a bit of a hassle to use, so I used that one for my enhanced drivers license - which will rarely need to be removed anyhow.As for getting them to fit in your wallet, it may be a bit of a struggle for smaller wallets, as these sleeves are thicker (but also much sturdier) than the standard paper-ish sleeves. You CAN cut a little bit around the edges - which I ended up doing along the top where the card goes in, and around all four corners, and then sanded with a nail file - this helps a bit. Just make sure you have good lighting so you're not cutting the part where the clear plastic connects to the black plastic. I also found that there were some rough edges on the credit cards themselves, so I ended up sanding those minimally. The fact that it took a bit of work to get just some these to be usable is disappointing, but the closest product I found (the OPTEXX ones) seem not to actually block RFID according to reviews, so I'll settle for these, I guess..

I ordered these 2 sets of these RFID sleeves after checking out all the other venues and types that were available. I decided on these due to the fact that they are plastic over paper and the window was available on one side to allow seeing which card was in the sleeve. After they arrived I handed them out to my adult children and husband and kept some for myself. My husband liked the idea, but was having an issue with the window sticking to the front of the card making it difficult to slide the card in and out. Being patience is not his strong point, I found that inserting a sliver of card stock in between the window and the card made the sliding very easy and a non issue. He is quite pleased with the product now. I also like these sleeves as they definitely will last for a very long time and probably won't need replacing. They are nice looking and I feel will do the job they were meant to do. I did have difficulty getting them to fit in the slots of my wallet as did my husband and sons. The men store their cards in the cash part of their wallet rather than the slits and I also adjusted my wallet accordingly. I think I would rather these than a flimsy paper sleeve that may fit in properly, but only have to be replaced down the road.

Credit cards can be hard to put into the protectors at the beginning but will become more flexible with use. I am glad I purchased them

I became concerned, after learning that all credit/debit cards were being transitioned to RFID technology, about the possibility of my data's being stolen. Not unpredictably, Amazon was my first stop, after which I quickly noticed that Card Armor sleeves seemed to have earned good reviews with follow-up by the manufacturer. I ordered a set and was immediately impressed by how solid and well-made the sleeves are, not to mention unobtrusive--your basic black, textured finish. The cards are a bit tight at first but the sleeves soon develop the right amount of "give" and, as assured by the manufacturer, you can fit two cards into a single sleeve, although I prefer that everyone have a home of their own.I gave one sleeve to a friend to try and shared the others with my father. I intend to order a second set to both share and have on hand in case they're needed. The manufacturer contacts the buyer post-purchase, which I appreciate, and is very concerned with customer satisfaction, which I also like. Very highly recommended.

I really like that they are small enough to still fit in my wallet and they are durable. I will most definitely buy them again. They do the job and look nice as well. Gave four stars because sometimes the card does get stuck to the plastic film but that’s just minor.

Feeling safer and easy to use.

If you carry more then 1 Credit/debit card these are a must have. With these RFID sleeves I can actually see the credit/debit card I am pulling out of my leather wallet, totally eliminating the guessing game when using RFID blockers that all look the same and hide the card type and/or bank name. The see through factor was the primary reason I bought these particular sleeves over other brands. I had no problem fitting them into the slots provided in my wallet, and although snug, they are easy enough to remove when at the checkout counter or at hotel check in desks.Fast delivery, good product, overall great purchase for the price.