SunWave- RV Awning Fabric Replacement | RV Electric Awning Fabric Replacement | Premium Vinyl RV Canopy | Awning Replacement (22', Brown Strip)

Bought this to replace the old torn one on my RV C. It is actually longer than the original one by about 6 inches. BONUS!! Nice thick material and looks great. The install was a little tricky, trying to get the cable pressed into the slot with that cheap roller they supplied. I went to the store and got a better one and it was a great improvement. Hoping this lasts 8 years like the last one did.

Fit well and looks great! Installation was easier than I expected…my wife and I installed it in less than an hour. Watch “Fastest awning replacement I’ve Seen” on YouTube as its videos two guys who replace awnings do for a living.

Got this to replace an older deteriorating vinyl pull-out awning. Getting the old one out was harder than getting the new one in. You really do want some silicon spray for the track, and need to read up on how to install this in the bar (dealing with the springs, etc). But the videos on their site and on youtube are pretty good.You WILL need to have a friend or two help out at least on pulling the cord on the trailer run, but the rest is doable alone if need be. All in all took about 2 hours for me to install, with friends helping about 30 minutes of that time.The quality of the awning is really better than I expected. It's quite thick, multi-layer, and I had no worries about ripping it during install or usage. It was stronger than the one I was replacing by far. It does have a slight odor at first, and needs some time to stretch and air out when you first put it in. (So if you're doing this on a weekend, do it Friday, not Sunday.)

Purchased this for my camper, installed it with just me, my wife, a ladder and a truck bed. had it all opened up and saw daylight through 3 spots. a bit disappointed in that, but some silicone goop and time to cure, I'll be OK with it for the price.

Just finished installing the 18’ awning I purchased last year. It came nicely rolled and coiled, and was left in the box until now. Seems pretty well made and looks good. I watched a couple of “How to change RV Awning” videos on YouTube and was able to it install myself with some help from a couple of friends for the reassembly. Hopefully it will give me years of service!Installation Note: The awning came with a pre-sewn in cord for the roller valance anchor and for the RV anchor, however the roller main anchor cord comes separate, and as 2 pieces, so you can feed it in from each end. You have to slide the valance anchor in the track all the way, then fold the awning material into the second anchor channel, then tread the cord in from the end to secure the material in the channel. It’s a tight fit until you figure out a solution. I highly recommend purchasing the “Awning Fabric Installation Tool from SunWave”. I was able to do it using a window screen installation roller, but I think the Awning Fabric Installation tool maybe be a little wider and have more depth to it, which would have been much nicer than the screen roller. Basically, you run the roller down the channel forcing the material into the groove, then feed the cord through. It help to use some silicone spay lube, and occasionally roll down the length of the cord and the channel as you go, it made it much easier for me! Other than that, the new fabric went on well, and fits perfectly.

The awning is exactly what we wanted. It was easy to install in less than hour. The quality appears to be very good. I was especially pleased that it was carefully packaged and did not have any pin holes from folding as did other purchases. I gladly recommend this product. DonR

I bought this because I really wanted to replace my old RV awning. Mine was in pretty terrible condition and I'm not sure why I didn't replace it sooner. The shop I went to made it like it was going to be crazy expensive to do, so I figured I'd try to do it on my own. All things considered - it's a pretty good price for the awning. They do include a instructions sheet which does help out, but I'd recommend looking up a few Youtube videos to get the idea of what you'll be doing in general. I'd also say it's a 3 person job for sure. And like other reviews, WD-40 in the channel that the awning slides in will help a ton. And a ton of patience, we spent a good chunk of the day setting this up and hit a few setback along the way (mostly due to how dirty the channel was in my instance). Once done, it looks great. ItSide note: I will mention that Amazon suggests the replacement pullstrap and the fabric installation tool to go along with it. In my instance these both came in the box I got from Sunwave. Not sure if it was just me but you may not need these recommendations. But the extra fabric installation tool would come in handy for sure.