360 Lighting Lanett Modern Swing Arm Wall Lamps Set of 2 Painted Bronze Plug-in Light Fixture Oatmeal Linen Empire Shade for Bedroom Bedside House Reading Living Room Home Hallway Dining

I purchased and installed these lamps myself. What you NEED to know is that certain LED light bulbs are not compatible with the lamps as they cause a buzzing sound in the electric box built into the lamp base. I thought the lamp was defective, but then tried a DIMMABLE LED bulb and it worked fine. I love that they these lamps!!

Well made wall lamps with a fairly neutral/modern styling. They do swivel from side to side, but with the shade in place you can't get them very close to the wall because the arm is fairly short and jointed only at the base, but it does allow you to direct the light to some extent. Considering the way most products are made these days, I think the quality of these lamps (they come as a pair) is pretty high. One reviewer complained that the lamp was not lined up on its' base vertically, but I've found there's a little play in the mounting so you can correct for any vertical displacement. You can't tell from the pictures, but there's a plate that attaches to the wall with screws, and then you attach the lamp to this plate with the two round knurled nuts that you can see in the pictures. It's good to have some sort of level to ensure that you get the plate mounted level so the lamp ends up level once its' attached. The knob on the base that's directly beneath the lamp is a rotary control that goes from OFF (fully conterclockwise) to full brightness (fully clockwise). This acts as a dimmer through its' rotation, so CFL bulbs that aren't specifically made for dimming will only be on or off. Parts selection looks pretty good and the cord is an approved, solid cord at least 6' long with the typical 2-blade grounded plug. Lamps of lesser quality seem to skimp on the shade, but the shades for these lamps are high quality as well. I bought the matching metal cord covers and this really dresses up the lamp, although it does leave one seam, but I don't find that objectionable. All the screws come with both the cord covers and the lamps along with drywall anchors -- the screws are more than long enough, especially for the cord covers, so I substituted my own shorter screws. I also bought a 4-pack of the suggested 43 watt halogen bulbs. These provide ample light to read by, but I could have used brighter bulbs had I wanted to. Take your time in the installation and you should have a matching pair of wall lamps that will last for a very long time. Highly recommended.

The media could not be loaded.  Nice lamps for our headboard. We mounted right to the headboard since it has holes at the first shelf to run the wire behind and plug in. Design is nice and clean. Shade is sturdy and the metal is welded fine. The only thing we don't like (and read from at least one other review) is that the light doesn't come on right away when the dial clicks on. You have to twist it farther than feels normal and it pops on at about 40-50% brightness. If you want to get down to a very low dim it can be a challenge. I'm not sure if other brands perform differently or if it's just a struggle with LED dimmer dials in this style. Maybe the little electrical box inside the mount box can be swapped for something that makes this better?

Very easy to install, arrived put together so there is nothing to build.I love that it's dimmable.Looks exactly like pictures and is exactly as described.The only issue is the drywall anchors seemed really cheap and after issues getting them to work so we just used anchors and screws we had.

I'm used to lighting design, map projection and light in everything. This product is amazing for a few reasons. First of all, the customer service is amazing because I bought 2 and one of them came with a cosmetic defect. They sent a new one to me and apologized, so they deserve our respect as a consumer. Second, the product is of the highest quality as the material is 304 steel, there is no visible solder piece, no steel burr, no loose parts, the finish is modern and without that classic 1970 USA style crap.Many of the things in the US, especially in Florida are the same as they were used in 1930 and it makes me gag, but they've managed to keep a modern design that goes with both styles so if your house looks like a museum or if it's modern like mine , will match in the same way. The product uses thick plate and is heavy, which means greater durability and overall quality. The screw caps are steel and the only plastic thing is the dimmer knob, but luckily it's chrome. Recommended by far. One tip is to use half-chromed LED bulbs.

These lights actually came from Lamps Plus who I have dealt with in the past. Their reputation remains stellar. The product is well made and very sturdy. The wall box is all metal and the swing arm is also well made. The shades are a thick material and the framework is strong. This is a 100% great item. They come with a cord to plug them into a wall socket. For those of you that want to hard wire them, a small amount of knowhow is necessary. I drilled a hole in the back plate large enough for a piece of Romex wire and filed the edges smooth. I used a small piece to protrude through the hole as an insulator connecting one end to the house wire and the other end to the lamp wire. The back plate box is big enough to fit the wire and wire nuts inside easily. That's it. Works great. The lights have a dimmer switch on the plate, but for my purposes being hard wired, I just use the wall switch to turn on and off.

I installed 2 of these lamps, surface mount style with the metal cord covers over our queen size bed. I used DIMMABLE LED bulbs. That has made it possible to use much brighter bulbs than you could safely use if you used incandesent bulbs. Arms do not swing too much, but that is OK because the short arms are more solid than longer arms would be. Also the shades allow the room to be illuminated overall so they don't need to be "right on the book". We like the dimmer location on the wall plate of the lamp. They are working well for us